Search results

  1. S

    Nvidia Previewed Unreleased Graphics Card At "Secret" Meeting

    Dual 980 or 980Ti cores(GTX 990) on single PCB. Probably spoil AMD Fury X2 plans. I'm guessing $999 or $1,300 depending on cores used.
  2. S

    ASUS X99 Motherboard Series - Official Support Thread

    Testing my X99 Deluxe right now. Right now typing this they're at 44C in my 800D aircooled. I purchased the EK-X99 block as I've planned on using it regardless as it's actually easier for me to integrate it into my current loop rather than leave them stock cooled.
  3. S

    What is wrong with my loop? (Pics inside!)

    Looks like oxidization of the copper to me. Happens to copper after awhile due the the oxygen from coolant flow, I believe this is why they started nickel plating in the first place. You should be able to clean with either ketchup or citric acid/water solution.
  4. S

    WC'ing 2 970s with Heatkiller Multi-Link...a few questions.

    Hi all. I'm hoping to be converting my 970s to watercooling soon, and have a few quick questions with the Muli-link. I'm gonna be using Heatkiller 970 blocks along with the Multi-Link adapter. However, I've never installed one of these adapters and there doesn't seem to be instructions on...
  5. S

    X99 Deluxe...safe to use with original version AX1200i PSU?

    Got a new EK-X99 VRM waterblock so i'll be looking at the mosfets anyways :) So you have the 1200i original as well? I can't find a 1000i, I figured you meant the 1200.
  6. S

    X99 Deluxe...safe to use with original version AX1200i PSU?

    Hi all. Just trying to get some help here. I posted this somewhere else too without much luck. I've been working on my X99 build for the past few weeks before integrating into my water loop. I've been using my Seasonic SS-860XP2 "tester" PSU for testing the new parts, OC'ing, and making sure...
  7. S

    Just ordered Asus X99 on Newegg!!

    Haha, nice :D I also went with the 5820K this time around vs the 5930K that I originally planned. I do like having a dual gpu setup, but prefer it on a single card vs 2 physical cards so I really don't need the extra PCI-E lanes. Also thinking about adding a RevoDrive 350 or one of those...
  8. S

    Just ordered Asus X99 on Newegg!!

    Just wanted to give everyone a heads up, been clicking the refresh button all morning and it just popped up a few minutes ago. I went with X99-Deluxe @ $398.99. I was looking at the Rampage V, but besides being $500, to me it has a bunch of extra features I would probably never use(OC Panel...
  9. S

    3 Displays....possible to only have 2 cloned??

    Hi all. Got a question that I'm hoping someone might be able help with. I might be assembling a Kaveri rig for someone. They want to stick with windows 7. They want 2 monitors hooked up plus a TV. The thing is they only want the secondary monitor and the TV to be cloned, leaving the...
  10. S

    Possible upgrade for an A4-5300 cpu....

    Thanks again for the quick replies. I was thinking the 750ti would be a good choice to if they want to stretch to $150 plus not needing a power connector. Seems to be a good price/performance card. Surely the Powerman can run this low TDP card I would hope. For the other question, the...
  11. S

    Possible upgrade for an A4-5300 cpu....

    Hi all. I might be adding a videocard to a "Cybertron PC" for someone(actually their son) and could use some input. It has an AMD A4-5300(3.4Ghz dual-core), 8GB ram and a newer 1TB HDD. It's only a few months old, and it's used for a fair amount of gaming that I can see from the steam...
  12. S

    Recommend me a very large PC case

    Another vote for CaseLabs here:D
  13. S

    Trying to fix HP DC7100...odd freezing/video corruption.

    Hi all. Just wanted to post a quick update. After some more fiddling with the DC7100, I might have finally got it working correctly. For whatever reason, just switching the 2 ram sticks to different slots seems to have solved the problem :rolleyes: It has 4 dimm slots labeled XMM1, 2,3, and...
  14. S

    SLI 670's Artifacting.. Is it the Mobo?

    Seems like it's only happening when using DVI-D on the monitor, but seems fine with your TV or monitor using HDMI but limited to 60hz. You mentioned it happens with both cards and different DVI ports on the cards themselves. Do you have an old monitor or possibly borrow one with DVI-D input...
  15. S

    Trying to fix HP DC7100...odd freezing/video corruption.

    Thanks for all the help offers guys. It's awesome to see people on here so willing to help other enthusiasts out. I'm gonna check running one stick at a time next week when I'm working with the HP again. If that doesn't pan out, I'm bringing one of my old HDDs out of retirement to see if it...
  16. S

    Trying to fix HP DC7100...odd freezing/video corruption.

    Will let you know. I'm away from the pc in question until early next week. I'll post my findings in a few days. Never thought having more than 1 stick might be what is causing this. Haha, I like your quote on the blazing speed of these machines. That being said, though, this will only be a...
  17. S

    Trying to fix HP DC7100...odd freezing/video corruption.

    Thanks for the ideas :) I did forget to mention that the CMOS battery was dead, so I replaced that. Also looking thru BIOS didn't help much, only a few limited settings from what I could see and some stuff I have no idea what it does. Event viewer didn't show much either, just some PS/2 type...
  18. S

    Trying to fix HP DC7100...odd freezing/video corruption.

    Hi all. I'm having some trouble trying to fix this old HP DC7100 tower for a friend. It was donated to him and even though it's old, its a bit of an upgrade vs his older tower. Anyways, the problem is with a fresh install of XP, it's freezing solid with odd colors distortion everywhere within...
  19. S

    What is your video card upgrade history?

    Radeon 8500 LE Radeon 9700 Pro Radeon 9800 Pro 256MB Radeon X1800 XT GeForce 8800 GTX GeForce 8800 GTX SLI GeForce GTX 295 Radeon HD 5970 Radeon HD 6990 Currently running my GeForce GTX 690 :)
  20. S

    Problem idle temps with Core X6800

    Just a thought...does the X6800 have an unusually high stock vcore voltage compared to the E2160 that it replaced? Bad sensor/uncalibrated reading from CPU itself reporting higher than actual temps to coretemp??
  21. S

    Corsair psu dead, normal rma or express rma

    I've used the standard corsair rma twice before. Both times took about 2 - 2 1/2 weeks from shipping out to getting replacements. I live in PA and had to send to CA though and I used standard UPS Ground. I did have to include my newegg receipts.
  22. S

    Real tricky problem with watercooling

    Could you get some temp readings from running Prime95 or IBT while using realtemp or coretemp to get a baseline idle/load temp for your 3930K. Also, for ARMA 3, try running gpu-z with the logfile option enabled so when you exit the game when the artifacts occur you'll have a file to view and...
  23. S

    FT03 Vs. Corsair Carbine for Micro ATX build

    Not sure if this will be helpful or not, but I do have an FT03 Mini(the ITX-only version of the FT03) for an HTPC/Gaming setup. It only has a single 140mm intake fan at the bottom for ventilation which I have blowing through the rad for my H60i I have on my cpu. Have an i5 3470, ssd, hdd...
  24. S

    Odd audio problems...receiver going bad??

    Hi all. I've been having some sound problems w/ my HTPC setup that started a few months back and seems to be getting worse. My receiver in a Yamaha RX-V473. I have an HDMI cable from my HTPC's GTX 670 to my receiver, then lastly to my Panasonic TV. This setup has been running pretty well...
  25. S

    Ducky Shine 3 Mechanical Keyboard

    Really enjoying my Shine 3 YOTS edition w/ the aluminum top (#513 of 999). I have the MX blues and I like the "clicky" sound myself :)
  26. S

    Flow rate issues (Pump not the problem)

    Glad to hear you got it sorted out :). Let us know how things are running(temps, ect)once you finish your rig.
  27. S

    Flow rate issues (Pump not the problem)

    How long timewise is the actual decrease taking from first turning on the pump? I'm guessing an air pocket in a top radiator, vacuum lock somewhere, or perhaps pulling some air into the pump when your tubing turns 90 down out from straight coming from reservoir to go down to pedestal pump(s)
  28. S

    New build need help with Water cooling setup

    I would probably drop the the 80mm rad all together as its probably a very small gain vs 3 360 Monstas unless you want every last degree plus the noise of 2200rpm fans. For loop order I would change a bit as the VRMs can get toasty on high overclocks(over 4.7ghz or so).. Otherwise they would be...
  29. S

    Corsair Air 540 Water Cooling Loop -- Suggestions Welcomed

    The Alphacool NexXxoS ST30 360 Radiator may be worth a look for your 360mm front radiator as it's only 30mm thick. What thickness requirements are you looking for regarding the 240/280 rad? Also, for ram watercooling, are you contemplating this for functionality or the "bling" factor? :D From...
  30. S

    How to drain using quick disconnects

    Your supposed to use a extra Male or Female disconnect. So if your using a set of M/F inline, disconnect the two ends, and attach an extra opposite disconnect on one end to a length of tubing and drop the other into your draining container. Also remember to unscrew a stop fitting off of your...
  31. S

    Let's Get BIG - CaseLabs Cases

    Made the switch to CaseLabs recently myself :D I can vouch that even though they can get super expensive, especially when you start adding the accessories(extended tops/pedestals/rad mounts/casters/ect.), they are top notch quality. Their customer service department is also excellent for any...
  32. S

    Phanteks Enthoo Primo, ASUS Rampage iv Black Edition build

    Nice setup you got there:)
  33. S

    430W enough for my system?

    You'll be fine with a good name brand/well built unit. I have a Mini-ITX gaming rig hooked up to my tv. It's equipped with a 450W Silverstone SFX power supply. Inside is an i5-3470, GTX 670, 3.5" HDD, SSD, BD-burner, and cooled using a 140mm Air Penetrator fan and a Corsair H60i AIO cooler...
  34. S

    Looking To Build First Custom Loop For Rig...

    Haha good catch. :). I made my account on here back when I was rockin a Silverstone TJ-07. Nice case BTW. After which I went with Corsair 800D. I wanted to get a case with a more manageable size with at least equal cooling capacity. Decided on CaseLabs doublewide this time for better WC...
  35. S

    Looking To Build First Custom Loop For Rig...

    Another vote for CaseLabs here :D Very happy with my choice coming from an 800D. Fit & finish is excellent, the pieces just fit together perfectly. Tons of options for watercooling installation.
  36. S

    Compression Fittings, Bitspower or Monsoon

    Another vote here for Bitspower :D Using them for years. I'm using the newer Primochill Advance LRT tubing myself. Bitspower fittings along with Koolance QD3s work just fine with the tubing, though it can be tough to tighten them occasionally. You can "cheat" though for tightening w/ some...
  37. S

    Recommend me a PSU around 500W for use in a mini-ITX build

    I'm using a Silverstone St45SF 450watt for my mini-itx system. Its an SFX form factor with an atx adapter plate as its smaller than atx. They have a modular version too. It runs my i5 3470 non OC with a GTX 670 for gaming no problem. Relatively quiet too. It supports haswell CPU. Mine is...
  38. S

    Am I screwed?

    It's actually a tiny capacitor(work with parts like these for a living). I personally wouldn't try powering on the board without it. We've seen boards at work fail test, damage/fry components with what would appear as a minor defect(bad solder joint) let alone a missing part.
  39. S

    83C for 3570k @ 4.5 Ghz under load normal?

    What dikky said may be correct, as I'm not using Ivy bridge. Still, that seems like way to high a jump for idle to load temps using watercooling let alone a 360mm radiator. I could see maybe 63C...but 83?!? I would double check the obvious first. Good contact with cpu block? Are you sure you...
  40. S

    Power but no display, urgent troubleshooting

    Did you try using the set of ram slots closest to the cpu by chance? I realize it says use the other two in the manual with 2 sticks, but maybe worth a try. Any other ram sticks laying around? If not, as others mentioned it may be bad ram as I doubt somebody on here would knowingly sell a...
Back
Top