Search results

haha i have a friend who is pretty much into turbocharging cars and he came over and saw my phasechange setup and was like, "IS THAT A PRESSURE PIPE!!?"

i run my 24/7 setup at 1.39V for 4Ghz, but then i have phasechange cooling also. used to run it at 4.4Ghz but i've taken it down a bit since i don't really need that amount of power :)

so, how much time do we spend watching porn ?

wow that sounded so much like stargate atlantis. or any other scifi series for that matter :P

how about phasechange results? i know we are not many but i would love to se how it performs while being under a capable phasechange system. Like a modded vapochill Ls or Mach 2.

my qx looked pretty much the same, acually worse but it works great. so you should be safe.

there is a great guide here http://hardforum.com/showthread.php?t=1198647 read it :)

sure but could you get a q9450 to 4.4Ghz prime stable ? i hardly think so. but i still agree that the bang for the buck ratio is terrible.

ok i guess i stand behind you, i went straigt from air to phasechange so i havn't really played with watercooling.

but then i use phasechange cooling to, and that has alot to do with my OC sucess. i personally think that if you're not running phase or water the Qx is a waste of money. (now im gonna go try out how well my new qx9650 OC's) :D oh and i won my second one, im not made out of money :p

i have 2 of them, anyone wanna buy? :P

im running my phasechange system on a DFI X38 T2R, with a qx9650 to. and the best thing about this mb is the plenty of space around the cpu, so isolation is a cakewalk. The nb heatsink is a very tight fit (going against what i just said). but if you' r using the stock LS the mounting kit is...

i got my e2140 (1.6Ghz) to 3.6Ghz prime stable. but that was with phasechange.

not trying to be a forum police here but this is really the wrong section. This is for the Extreme cooling solutions such as subzero Phasechange and Liquid Nitrogen cooling.

ahh crap now i got extremely curiouse what the wrong article was about...

yeah seems to be pretty low since i get around 21 000 with one radeon 3870x2 and Quad @ 4.4Ghz, 3dmark 06 is pretty damn cpu based :p

it should be possible, i use 1.368V for stable 4Ghz and 1.56V for 4.4Ghz. but then im on phsechange.

i have a e2140 that does 3600 prime easy :D gonna test it alot more when 2stage cascade arrives :)

well i bought mine from a well known chinese overclocker called Wictor Wang, and he went through a number of qx9650. so the one i have is handpicked. More than that it works just like normall, increase fsb and/or multi. increase Vcore, then offcourse you can play around with VTT and PLL...

not having any problem at all with my cores readin differently, but on the other hand they read it totally wrong since im using phasechange. the temps are the same always no matter load/idle. i go by the evap temp instead.

ok what do you guys think? i've got a 2stage cascade coming in in about a month, will it even be possible to cool a similar router? probably not due to cold bug. but it would be nice to try :D

would be fun to try one out but i find it's just not worth it. the qx9650 does the job just fine :)

hmm maybe i should put an SS on my router ;D

well look at the size of that compressor, it will suck ass! just my 2 cents :p

i use ati tool and that artifact scan works pretty well :)

well it seems to me that it has terrible performance? max stable load 120W? but i guess you get what you pay for.

well it seems the performance just isn't there. AC Input: 110V • Compressor: ZEL GQY70AD • Refrigerant: R507 • Max Stable Load: 120W • Idle, 0W: -45 to -55 C • Dimensions (DxWxH): 18.0in x 8.2in x 10.1 in • Weight: 26 kg/ 50.6 lbs max stable load 120w? doesn´t look to good.

could anyone that runs a pretty heavely overclocked system tell me how high your pwm temp is ? mine is through the roof ~ 73* without fan blowing at it at full load, 1.552V vcore, 1.250vtt 1.51vpll 1.40vNB. im starting to think that this is my instability problem

Dan, Whats your setup? i find it pretty funny that we use the same psu and the same RAM, looks like i've been reading up my hardware :p

but it's damn nice ram huh? =) so annoying i can't fit my corsair memmory cooler though :/ might be able to squeeze it in if i remove vid card.

well im on phase so i don't really know but i think 3.8-4Ghz would be possible with the monsterous stock hsf.

throwing up some pics for ya! '' overview of the system. a little closer. the very tight fit between gfx and the ram banks. the insane amount of space below gfx

nah not yet :( gotta go sleep. but il try maybe this weekend :) il might throw in some pics tomorrow on how beautiful this mobo sits in my rig :)

i acually had no problem switching ram with my 3870x2 installed, it's one tight fit but i just managed it. now it's up and running on phase :)

just got mine :D time to start isolating around cpu socket :)

well i live in sweden so i ordered from the closest online shop wich turned out to be www.trend4pc.de in germany :P

i've just ordered one to, and by the looks of it it's gonna be a cakewalk to isolate :D (due to phasechange cooling). it's so clean around cpu socket :)

hehe j/k offcourse

aww crap.. now i gotta upgrade my qx9650 :(

nah i've been pretty occupied with other stuff, and i got the compressors for like one week ago so they havn't been sitting around that long :) i acually got 3 of em but there was a huge difference in price in building a 3 stage VS 2 stage so il start with that. But i guess it wont take long...