Search results

Without temp before and after shots i can only give stare in amazement of how ghetto that is.

Someone finally beat my rig. damn.

Thank you for the support and the criticism. I do have a few responses to the general comments 1. i chose the 80mms because i wanted 2 fans blowing in and 1 fan sucking air out. also, the height for the mod would have been changed because it would have been only 240mm tall as opposed to...

Brutal.

I'm looking into this wire sleeving but it is conductive. how would i ground the sleeving?

but i get the higher multi.

I'm debating what i should upgrade to and i need some help. should i get a new processor (e6600) or the patriot 1066 RAM? i'm trying to get the maximum overclock possible. if i get the 1066 i can push my proc much higher, and im getting liquid cooling so i know i can handle a good bit of heat...

hey... not only are you completely wrong, but i already explained how very wrong you are. i said in the first post that i had only one original part from alienware, the fan. the fans lower my temps by 8c with my overclock. its a hiper power supply and i checked all my volts so my fluctuation is...

i have the red fans like that because they are the exhaust fans. the vent there is for all of the exhaust and it glows really nicely with all the red fans.

if money and space is not an object then it looks like one intense water cooling rig. but i don't see the purpose of cooling the nb and sb unless you are doing some seriously beyond intense overclocking. and especially since you are inexperience at water cooling i would suggest just the cpu and...

it would look so great if you painted the inside black

the idea of "is that feasible" is completely dependent on your ram and chip. if you have 667 ram it doesnt matter made if your cpu is at absolute zero, its not gonna hit 3.6. but if you have the capability to hit absolute zero you should sell that machine and buy 1066 ram

i've been painting a bunch of my hardware white (for my Parepin mod) because i want my Lian-li to have a clean-room look to it. i took of the heatsink of my 8800gts and i painted it but now i want to put it back on the card. what would you guys recommend for thermal paste? should i stick with...

if you want something cheap, the artic freezer 7 is great. a cool mod would be to cut out a blowhole so that the case would fit the ultra, and you'd get better cooling too.

I bought an alienware 2 years ago as my first computer. Only 1 piece of the original computer is still in there; the 120mm fan. you can see i cut the sides of the case (the black plastic) and added modder's mesh so that i have better airflow. The vent in the back of the case is for exhaust...

i just painted the inside of my Lian-Li white. it was very easy (i had no experience too). i wanted a flat color to it so i didnt do intensive sanding or anything. painting the inside of your case reallly gives it a great look. i wouldnt suggest black, just because its so over done.

do you think you could do a more in depth job on the wiring job? i really love it and i want to know more about it.:D

what grit sand paper would you recommend?

what brand of paint would be the best choice for painting the inside of my Lian-Li?

unless you are trying to build a silent case, you really dont need a fan controller. if you listen to music when you use your computer, you won't be able to hear the fans (or you won't be bothered by them). i have a few fan controllers and i wish i had spent the money on something else because i...

thanks for the compliment on the handle. South Carolina's just but cause it never gets really cold. i think i snowed a few years ago... maybe.

psssh. st. louis. Try South Carolina. 100 degrees is just splendid for overclocks.

anybody know how i can look at the cases and not pretend to understand Japanese?

technoob wins.

sorry if i made people think that the whole case was shopped. i just thought the interior paint looked shopped and that the fans looked copied into the pic. but dam. i'd buy one of those cases in a second. anyone got a link to a page for customizing the cases?

definantly some of the most beautiful cases i've ever seen. but does anyone else get the photoshop feeling? i know the cases are real but... i dont know i just get that gut feeling.

thats the issue though. i dont want something that just glows on the edges, i want THE look of that acrylic. i had been wondering about the clear acrylic too, thanks for tip.

its a sad day... a sad day.

this is the kind of acrylic im talking about

you should get a foot of sleeve and sleeve all the wires from the mobo switch control and usb port.

the fill and drain ports look excellent! you should line the side of the 4 fans with something so it looks more prof.

bump

thats no fun. i'll just have to put green acrylic on the bays instead of the plastic. thanks for the help

it looks like all of my favorite mods use acrylic in some way so I'm looking to find the right kind. ACRyan looks like he has good acrylic but the UV reactive green appears like it would be see through in normal light. is that true? does his normal green acrylic give off some kind of uv-like...

could anyone that has this case tell me how the 5.25 bays look? does the green glow like in the picture or is it just green plastic?

thinj, the bottom pic is amazing! i dont like the case with the side cover on, but the bottom pic :eek: you should make a window for it rather than the hexmesh looking side that you have now.

i dont understand the question. are you trying to syphon out the water? what the hell are you talking about?

yeah, i read about how weak parts of the case are but that just means i can cut through it more easily:D . how do the green bars in the front look? in the pic i posted they look amazing but i saw another photo of them and they look really weak. also, could i remove the CD and 3.5 bays with a...

look at the mods in the galleries and gather some ideas on what to do. twistedmods.com has a few tutorials on how to do some mods.

you said you talked to the guy who made ORAC, do you know what kind of acrylic he used? I'm looking for similar green acrylic.