What I like to do is use the Supermicro A1SRi-2558Fas the storage system for VMs. I am currently looking at FreeNAS or even Windows Storage Server 2012 R2 for that duty. I may well just build the ESXi machine from scratch as my Opteron system is pretty much used for my SharePoint developments. I...
Heya all,
I have been running VMs under Hyper-V using direct attached storage. The same machine is also running my DC, DNS, and file shares for the family. I have an ATOM which is barely being used and like to get that setup as a NAS if the hardware is good enough to do what I want.The...
Hello all,
I am trying to setup my SharePoint development machine so I can develop on Project Server 2010 using the PSI. I am having some problems with the setup and hope someone here has had experienced with this server?
Question I have about the M5, will it go through the two floors. So pointing upwards from the basement, through the first floor and then to the other device in the second floor? If I lose some bandwidth that is okay. I just hope I can retain as much upload speed as I can.
Installation for new cable was not a priority for the other owners, was for me off course. This is in Germany and without the authorization of owners, no company nor myself can install a new line (even going up the wall on the outside). If I do it, then by law the other owners can force me to...
Bandwidth is 100Mbps down and 10Mbps up. I do not know if powerline would work in this case because the basement power is under its own power meter box and the actual floor is on another.
Yea, we the owners, decided by vote that we do not need to do any kind of upgrades to our building for 2015 or 2016. They want to wait until 2017. What I really need is the coax cable to reach my floor and put the whole equipment there. Now though, I am trying my best with what I have now.
Hello all,
I have a business cable connection in my basement with 5 IP address. Currently the basement holds the cable modem, Zyxel USG 50, and the servers.
I would like to move the servers upstairs, one floor between us, but there is no network cables nor any possibility to add them. My...
Hi all,
I have been running a ARC-1680 card for a while now. I decided to move over some Samsung 840 EVO over and notice that the current SATA Mode is at SATA150. Is there a way to set this higher?
I have only worked with SharePoint 2010 and 2013. But I was wondering if after you created the search application if you also have to start or enable the service? If this is not the case, then maybe look at the log files for clues?
My AMD 2 * 4310EE with 128Gb ram, 4 * Samsung 500 EVO in raid 10 for VM's. 4 * WD 2Gb Reds in raid 5. Both raids attached to Areca 1882 RAID Controller.
At idle, it runs around 96 watts per hour and this is with 4 VMs running. When the raid 5 is active, it goes up to 135 to 140 watts per...
Wow. Sorry to hear that. But could it have been the ram or power supply? But I think I am going to go the SM route too. I Need the lan ports more than the sata ports.
With my current ADSL line I would never run a web server under. It can barely let me log into my servers. If I get the SDSL, they come with the option of 5 IP addresses or more if needed. They allow me to run anything I want to, so web server, mail server, whatever. Of course I would have to...
Prices for 2mb SDSL line is 79 Euros before 19% tax. 4mb SDSL is 119 Euros. So around 100 for the 2 or 145 for the 4. If I get this, and if the bandwidth is there, I will serve and remote in. I have the hardware, just been more "away" from the house working with consumers and even though I have...
Oh I wanted business VDSL or business cable that also has a 10mb upload, but my house is a bit unlucky as both are not available.
Running speedmeter.de upload is around 420kbits/s and with speedtest.net around 600kbits/s.
Heya all,
I have 2 servers running at my home for personal and for business needs. I have them on my ADSL line and remote desktop to them is slow. I am in Germany and had some suggestions that I should get business SDSL. That way my connection speed would be better plus I can showcase my...
I am using my Server 2012 as my NAS. I get with the R5 using WD Reds 3Tb around 100 MB/second. My network gear between the computer and server is just a D-link green 8 port switch. I was going to buy a NAS from Qnap but after seeing the prices, I decided just to use the money on hard drives for...
I thought I would also post a good reply since people usually will not post when things run good. I have 4 3TB REDs running in RAID 5. They have been running 24/7. I am in Germany and got 2 from Alternate and the other 2 from Mindfactory and the packaging from both companies is excellent.
I cannot help you there as I haven't used Expression before. But if you can run your page by pressing F5, maybe then you can set a breakpoint in your btnButton1_Click method.
Are you using Visual Studios? If so then run the program with a breakpoint starting at the btnButton1_Click method and follow it until you reach the error. I can run your method without any problems except I had to fill the ListBox with something else.
Hello all,
I am getting a Areca ARC-1680ix-16 next week. I currently have a HighPoint Rocketraid 2720SG. Even though the Areca is not SATA 3, would I still see some improvements? I will be running RAID 10 for my VM's and probably another RAID 10 for storage. I might just play around before I...
Hello all,
Since I bought this router over 7 years ago, I have started to run my own servers. I like to get something which I can VPN into my network and have some control over content filtering. I have been looking at Zyxel and at Pfsense. I like to keep the firewall completely separate from...
I got a reply from another source and thought to post here in case someone else also may look for this type of information in the future.
His specs are: ASUS KCMA-D8 and two Opteron 4200 CPU's and the rest is in his reply:
Regarding power.
I am currently running with 4 HD (Hitachi 2 TB in...
I am currently running an i5 with 32Gb ram in a Server 2008 R2 with Hyper-V. I program SharePoint workflows, sites and other .net projects. For my programming, I run SQL Server, SharePoint, and Exchange 2010. I usually run 4Gb per machine. With 8 drives running it is using around 85watts when I...
@cactus many thanks for that reply. Would you know what your idle or just low load wattage is like? I would think the C32 (4200 series) would use less power than the G34 (6100 or 6200 series).
I appreciate the reply. I was running an AMD Opteron system with 2 2419EE on a Tyan 2915-E. System was pulling around 140w at idle and that is with a cheap video card and 2 hard drives. I saw a customer review of the ASUS KCMA-D8 with two AMD Opteron 4174HE only used around 60w at idle and that...
Heya all,
I am in planning stages of building a multi-CPU system. I am interested in the Opteron 4200's using the ASUS KCMA-D8. Power usage from the wall is important for me since we pay a lot per Kw. I have googled for this information but found no new information on the 4200 series.
If...
I am pretty much in the same boat. I decided to go with Norco case even though I will only fill-up 8 bays at first. But I know within the year it will be filled up. Just gotta figure which controller to get. Might follow midnkight's path but start with the LSI.
Hello all.
I am making a server which will run VM's (SQL 2008 Servers, Web Server, SharePoint 2010) . I am looking for a HBA card to run raid 10. There are so many out there. I need a card which will offer the ability to expand. I thought about getting a card with 2 internal SAS ports and 1...
Hi all,
Been reading the display board for a long time and now it has come time for me to redo my home office. I currently have the LG L246W. It works but it does have some screen burning and the connection for the power cord is very touchy.
My plan is first get the Samsung S27A850D to do...
Yep, I know. I think not having the source file is going to help me to get the client to change their mind. I just do what the client tells me to do. I can throw suggestions and advice in all day, but the clients always have the last say.