Search results

thanks. they appear to be the only one left that does it. i will buy from them.

My 2 year oldish 500GB Crucial BX100 is dying/dead seizing up and causing i/o errors 50% of the time after booting up and logging in so I looked into the RMA process. Even at 95% SMART, it's hobbled. Seems like no one is offering advance RMA (ie you give them your credit card and they send a...

didn't they take over Power PC & Cooling?

Remember when they were just a RAM scamming storefront that HardOCP took on in the 90s? http://www.itworld.com/hardware/379015/ocz-its-last-legs

Been a long-time user of this. Appreciate it. However, with v2.0 if I hide some devices, it crashes and won't run again until I uninstall/delete it and don't hide the devices?

directly to the PSU? won't there be heat issues?

Also, to curse myself for opening the case and probably cutting myself untangling the spider's nest of shit.

My P8H67-I Deluxe in a SG05 has lasted 2 years now--the longest I've stuck with a build. This is a record. To celebrate I'm going to replace the HD6850 with a GTX 660 (the Zotac one I picked up only has a PCB length of 7.35"!) and the 8GB of RAM to 16GB. This one:

Sorry about the thread necro--has there been any update as to better performing cards that fit? I'm still running a 6850.

Does this have good fan header control? All of Gigabyte's recent boards have lacked this.

Thanks. I'd completely forgotten about that separate option. It was set to 20min by default. I thought setting PC never to sleep along with monitor was enough.

Anyone know how to disable the sleep on these hard drives? Mine seems to go to sleep far too quickly. 7K3000 2TB SATA3 drive. Other hard drives had a AAM tool but this one apparently doesn't.

I did nothing special except burn the ISO from the Crucial website with Imgburn.

Yes, it's bootable.

Got a 256GB Crucial M4 to replace 2 dead OCZ Agility 3s in a row on Sandy Bridge. Definitely preferring this.

It makes no difference. 2 different SSDs have died each on 2.11 and 2.13.

Going to get one of these tomorrow after my 2nd OCZ Agility 3 went tits-up.

While I understand the level of support is non-existent on Intel's "self-help" community forums differs compared to the well-meaning but pointless OCZ-official-tech-support forums, the level of polish in Intel's SSD Toolbox software compared to the rinky dinky amateur hour SSD flashing program...

Avoid like the plague. http://www.ocztechnologyforum.com/forum/showthread.php?94404-Agility-3-Disappearing-from-BIOS Building my brand new Mini-ITX system (documented elsewhere on the SFF subforum here on [H] with an Asus P8H67-I Deluxe mobo, my OCZ Agility 3 SSD died after exactly 6...

Er, that's a Noctua fan not a Scythe fan.

i unplugged the 3000rpm scythe 80mm fan and put on top a 120mm scythe slipstream kaze-jyu ni fan for better sound characteristics. i used one 'type b' 120mm scythe fan clip that seems to hold it in on 1 side and the otherside touches or nearly touches the video card pcb. my brand new ocz...

Finally, my build is done. I'll have to disassemble and redo it since the CPU heatsink may not have sat properly--running too hot (50-60C idle) so I just threw another Noctua 120mm fan in there sitting precariously on the heatsink without secured in any way.

OH JEEZ I've come here to commiserate that threading the slim dvdburner's teeny tiny eyeglass-sized screws through the drive 'sled' with its holes that cause it to fall out and be lost is a harrowing exercise in steel nerves and eagle vision.

my xfx black edition 6850 won't fit because of the bracket underneath the gpu chip touches the kozuti fins. urgh.

Would this be adequate for an i5-2500?

Uh...isn't it bad to place hardware on the outside of antistatic bags? Isn't the outside conductive?

Sorry to necro an old thread but I found something that lets you fit both a 2.5" and a 3.5" in a 3.5" slot: http://www.newegg.ca/Product/Product.aspx?Item=N82E16817989004 Hmm, nevermind might not work internally.

Getting excited about building a SG05 build soon... does the 3.5" bay still fit with a Scythe Kozuti?

Thanks for the pics guys. I'm going to go with the exact Asus mobo, CPU fan and the SG05 thanks to your help.

Put in a 6950, works great.

Yep, will fit, no bottom cage. Thanks.

Thanks for the replies. I have a HD 5850 in there right now. I can't even remember if I have a bottom cage in since I haven't opened the side panel in a year.

Currently running a 5850 and am not sure if upgrading to a 6950 would fit. Any ideas?

I believe Velocity Micro has buckled under to Trademark Troll of "Edge Gaming" Tim Langdell's blackmail and licenses his scam-of-a-trademark on one particular line of gaming PCs.

On my new PC this last week, I returned my brand new X-Fi Forte 7.1 since it had no/poor shielding so it was snap-crackle-popping all the time. Went back to my PCI XtremeGamer and it's clear again.

You don't get any crackling, popping with your Forte?

ok this drives me NUTS. yanked it out and using adi soundmax onboard sound--no static, no popping, no problem.

I expect more out of a new $150 sound card I just bought. Had to Google search and line my bracket with scotch tape. WTF, Auzentech. Hmm, still there, but reduced, I need to tape it up better with black electrical tape.

Have you considered the SG02-F?

bah. putting in the hd5850 in the lower pcie slot blocks the jmicron esata port.