Search results

I just got this new NEC after replacing my viewsonic 20in that i did not have good luck with at all. This is a very nice monitor. Has preset setting for Text, Movies, Games, and Photos. Ive been playin WoW and it looks really nice on this monitor. If anyone wants any pic plz let me know.

about 11x8

did you figure out what it was? did you fix it?

Any ideas?

I just switched between my princeton 17 and my viewsonic and the difference was remarkable. there is NO banding on the viewsonic

yes, its in all resolutions. If it doesnt show up as an option for 1680x1050 how do i get it?

yes those are from my 2nd monitor, im not too pissed because my dad works in the computer buisness and he gets them for a little cheaper. Plus, where he gets parts from, if there is something wrong with the product within 30 days they just exchange it at the place for free. Not too annoying

yes, 60 hertz and for some reason after i plugged in the vga there ws no more1680x1050 res so i have it on 1600x1024. I'll dl the update now to see if that helps

now after it was plugged into my 17in and i plugged in my 2025vm it worked, but still the lines

I have a BFG 7900GT Yesterday I started switching cables to see if that made a difference and then i tried the dvi-vga converter and now the dvi input on my monitor wont work. The VGA quality is horrible so right now im back to my 17in princeton and the same thing is NOT happening. The DVI...

hey, this is now my second VX2025wm. I really like the monitor but ive been haveing a problem with it. I started using this monitor on my old pc for about a week and then i upgraded my pc i noticed that on the left side of the monitor i had about a 1 inch stripe blue going down the monitor. I...

My dad part owns a company that builds custom computers. When I was 5 or 6 I started installing the software for him. By 6 or 7 I put all the components on the mother board: cpu ram, (had to switch a few jumpers around back then) and by age 8 i fully built the computers for him. Im 16 and im...

ok, i ran the test for an hour and 45 min and was able to go through the set of tests 6 times. This is what i got: Test 0- 0 errors Test 1- 0 errors Test 2- 9 errors Test 3- 40 errors Test 4- 112 errors Test 5- 4 errors Test 6- 7 errors Test 7- 1 error Test 8- 0 errors Test 9- 0...

What ram would u suggest i use with the p5n32-sli deluxe? thanks

what is the shortest time i can run this test to get pretty accurate results?

no ideas? :confused:

Hi, i just built a new computer. I have a P180 case, P5n32-SLI Deluxe mobo, 2 Maxtor SATA 80gb hdd using the onboard nVidia Raid 0 controller, a BFG 7900GT, 1GB nSpire DDR2, 500W Antec PSU and 2 drives from my old comp: a 6x Creative Labs DVD drive and a NEC DVD-RW. The first problem i had...

I figured out what was wrong. For some reason my like 1 year old dvd-rw wasnt reading the disc right but my like 7 year old dvd drive did lol. Thanks for the help BigFNDeal.

alright, i found new drivers and i get past the part where it freezes, but it says that windows cant find any hard drives to write to.

i got a new mobo today and installed the new bios. I went into the windows setup to install the drivers and the same thing happend. anyone got any ideas? thanks

ok, so I go to install the new bios and it says that it isn't the right name. then it says that it is renaming the file, when it was done the computer restarted and no video would show up. I checked my video card and cable and they are both in good.

Hey guys, I just got a P5N32-SLI, a Pentium D, and 2 80gb sata maxtors. I want to do a RAID 0. I went into the bios and set up the RAID drives, but when i go to set up windows i have a problem. I press f6 and install the floppy i made with the 2 nvidia drivers on it, then when it is all done...

it says that this motherboard has sata raid but i only see one red sata connector, does one plug into a red and the other into a blue? thanks

Hey guys, im want to buy a P5N32-SLI Deluxe and a Pentium D. On newegg.com under the P5N32-SLI Deluxe it doesnt say it supports Pentium D, but in the ASUS magazine and on their website under CPU it does say Pentium D but it also says "Refer to www.asus.com for Intel Pentium D CPU and Eist...

Alright i think im going to go witth 7900GT, and what company is the best? eVGA?

what would be the lowest priced cards for something worth getting SLI?

Hey guys, I dont really know too much about video cards besides the memory on it. I want SLI. And my video card right now is http://usa.asus.com/products.aspx?l1=2&l2=7&l3=4&model=258&modelmenu=1 I am switching to a new mobo with PCI-E so i need a new video card any way. What would be 2 good...

yea, i have 2 cathodes inside. there from my old case and for some reason on one only the ends light up and the other only the middle, maybe because its old idk. BTW thanks for all the compliments

Hey, this is my first real case mod. I know its not perfect but its my first full case mod. Here are a few pics tell me what you think. Edit: These should be better. Sorry about those other pictures. BTW this is an old Uneec case.The case. Power and resets switch, USB and Firewire Input...

Does anyone know what the voltage is for the pins that you plug the hdd led connector into is? Thanks

good luck sanding that. interested in seeing where this goes.

The AMD one is awsome! if you can can you please post some pics of the front and back of the case? Thanks

forgot link lol http://www.creativemods.com/content/view/77/39/

I dont know if this will help, but here

yes, they are curved. Are they supposed to be?

What do the brushes do? Can they have such an effect that it doesnt show any sign that its on when i turn it on?

I like that floppy with the card readers in it, where did you get that?

its this one http://store.yahoo.com/tmt/noname5.html

I was just using my dads dremel to make some cuts in my metal case and while i was cutting it just stopped. So i turned it off and back on and nothing happened. So i tryed it in a few different outlets and it still didnt work. Its been 20 minutes and it still isnt working. Has anyone ever...

Red honeycomb! I cant wait to see what it looks like when its done!