So I am 100% addicted to this game. I swear it's like virtual crack.
It's on both iOS and Android. Go download it and start playing
Feel free to join my clan
update
Helios Rising is the clan now
I'm building a small machine to give to my cousin, I'd like to get a nice dual core for her. If at all possible I'd want a 7 or 8 series chip.
Max I can spend is about $100
PM me with what you got.
Intel Q9450 45nm-$220 PENDING
SLAWR Didn''t do a ton of OCing, but got her to 3.6 without much effort. I'm pretty sure she could keep going.
8GB Ipod Touch $200
Brand new in box. 2nd gen.
8GB iPod Nano $120
Brand new in box. 4th gen, Blue
Heat & Ebay under Dtess17
I am in the market for higher end case. I'm sick of my old one and it's about time I guess something a little nicer.
I've done research on all of these, and I think no matter what I'd be pretty happy, but I'd like to make sure I get the best case for my new build.
These are the few that...
I'm looking to get a P45 board for a build I'm starting.
I'll be looking to do some overclocking, Hopefully pushing to the 3.8-4.0 range. ( yes I know, everything overclocks different, and I might get nothing.) I could end up running Xfire, and I'll likely fill all four slots with 2GB ram...
I'm looking to get some new displays pretty soon, and would like to run either tri or quad displays.
Am I better off getting a 4850x2 to drive them all, or getting 2x 4870's?
I will be running XP for now, but I see vista in the near future.
Also it will be 2x 24" and 2x 20" monitors.
My buddy stopped over today, and brought some toys for me to play with. Asus Maximus Formula and a Q9450.
I haven't played with an Intel system since my old skt 478 system.You could say i'm out of the loop. Hence I have a few questions.
1. I had read a few things about being able to link...
Have the Opteron 170 seen in sig. It's feeling a little long in the tooth, and i'm basically in a dead socket now. I've decided to come back to Intel for this upcoming build. Any proc i buy at stock speeds need to crush this opty. I've been looking at the 6750, 6850 figuring they would likely do...
So i decided to go out and buy the GTX. I installed it last night, but i've noticed a few odd little things, not sure if it's something i did, or if it's a common issue.
first i use two displays, i've used ultramon for the longest time, over the change of three graphics cards, and i've always...
So here is an interesting one.
I buy the game, install it, use a cd key and everything...i go to run the game, and it will not open.
I thought it might just be a bad disk to i uninstall, return, get a new game....same problem
My system is gonna enough to handle the game so what gives?
I've been using my two dell 2001fp for the last few years and they are pretty nice.
However i think that i am ready to step up to three displays. I found a some sweet ergotron stands that i will buy to mount the displays with.
I've decided to move away from dell, and i am looking at some...
I'm putting the finishing touches on a system for my buddy and i've run into a odd problem. I feel like the answer is likely pretty simple but for some reason i am missing it.
I plugged in the 160GB (Dell) Raptor...and it just kept searching for it, i couldn't find it to install windows...
So my friend is having me build a system for him, and he wanted it based off the latest and greatest. From my understanding C2D are putting a hurt on AMD at the moment.
Problem is i've been using AMD and have not kept up on Intel at all.
So it seems the E6600 is one of the more sought after...
Sony Playstation 3
I have two Playstation 3 systems for sale. They are the 20GB models. Brand New, Unopened.
SOLD..
i can take more pics by request. I will NOT open the systems.
Both Systems come with Talladega Nights (The Ballad Of Ricky Bobby) Blu-Ray
SOLD!!!
I've ripped a few systems apart, and got some extra drives now. I am going to put them into some systems i got but i'm unsure on how i will set everything up.
i have.
1x 150GB Raptor
1x 160GB (Dell) Raptor
4x 250GB Western Digital drives
(all above are 16mb)
1x 200 WD drive (8 mb...
Quick question, i know this case is rather popular for watercooling, for those of you that chose to mount the rad up front in the drive bays what did you use to secure it?
Ok so i understand the whole DC and what F@H is for. Seems like a very good cause.
I downloaded it, and i seem to have set everything up just fine. I recall the client only uses your spare CPU cycles correct? Right now it's using something like 50-60% so i try and go do a cpu intensive task...
i've gone through an upgrade cycle and i will be taking my old computer and making it a more for general use and bulk storage. I will likely keep all my music, pics, and movies on this comp. I might do some light gaming and it will be used for day to day stuff like email and web surfing and...
how hard is it to make a top blowhole in a case?
What's involved and how long might it take?
Can it be done by someone with very little experience in modding ?
i just got my DFI-SLI-DR board today. I'm pretty happy first time with DFI and i hope it's a positive one.
now i have a few questions:
i notice there are jumpers for SLI which my last board did not have, i use multi monitors and only turn on SLI when i game via the nvidia control pannel...
Ok so here is my situation. I'm back from college and now have all my stuff in one place. i have like 4 computers I need to find a way to make this all work. i want to find a good solution to getting everyone online.
To start the cable modem is in my room. i just picked up a linksys wrt54gs...
i've been told the stock fan is very very loud.
i'm looking to replace it, i've seen the evercool fan that was ment for video cards...how quiet is that? Are there other coolers out there i should look into?
To the people that have this kit could you post your set up with idle and load temps.
Also if you have any pics that would be great too.
I'm trying to decide if i want to buy this full kit, or just build something myself.
For those that will tell me to go the DIY route, please...
I'm basically down to two cases.
Just trying to get more input.
i will most likely end up getting a watercooling kit down the road. So that is one of the main factors in choice...but it needs to have good cooling options just incase i stick with air for awhile.
either one a better...
Ok so my raptor decided to be awesome and stop working...normally i would just rma the drive and be done with it...here is the problem, i have a research paper on it that i need, and i really really do not want to write the whole thing over again. what can i do to get this data....i only need...
I need a new set of headphones, girlfriend just stepped on my old ones and they are now broke. Yes she is paying for the new ones :)
They are only for my computer, mostly gaming, but i'll listen to music on em too.
i don't want to spend much more than maybe $175 less is better. What does...
I was looking at these drives, and as far as i can tell it's pretty much the same drive, just one being bigger. Have i missed something? Would there be any performace difference?
http://www.newegg.com/Product/Product.asp?Item=N82E16822144701...
I am looking for a very stable, SLI MB.
i'm not too impressed with the overclocking on the board i have, and i think this opty 170 has a lot more headroom before it hits a wall.
I know DFI is usually regarded as the best overclocking boards, but i'm not too familar with their product...
i'm just wondering what temps other people are getting with this heatsink.
At stock settings for my Opty 170 these are my average temps, sometime a bit higher, sometimes a bit lower.
IDLE = 32C
LOAD = 43C
i will add overlclocked results later, as i am re testing.
Loading is...
Well i'm not 100% sure where to post this, but i figured it's a tool for testing overclocking so good enough right?
Well i decided to check out SP2004 and i like the interface alot better than prime 95, it seems to take all the normal tasks and put it right there in an easy to read manor...
i really don't have much knowledge about water set ups, but i'm thinking i might need it for my opty, i think with better cooling i could get it to 3.0ghz
I've been looking at the gigabyte 3d galaxy...
I've already become bored, and i feel the need to build another computer, i have the P180 and it's pretty nice, all of the slight issues aside, but i think i want something different for the next one.
I kinda like this case...http://www.newegg.com/Product/Product.asp?Item=N82E16811233002...
As the title says i'm in the market for an Opteron. I thought i'd try out the forum before i tested my luck through eBay or newegg/monarch
Looking for a chip that does 2.8 - 3.0ghz on air with low voltage.
Must be stable
Yes i know i'm asking for an awesome chip, but i know they are...
i just bought a raptor 150, and when i try to install windows on it nothing happens, if i try to just use it as a second hard drive my system hangs at post.
Have i missed something or is it just a bad HD?
For those of you out there that have 3 or monitors...how do you set em up?
As in their position.
as of right now i have primary in the middle with the 2nd on the right and the 3rd on the left.
that pretty much the norm?