Search results

My new build with an old Lian Li Q07: here the specs: Cpu: intel XEON 1275L v3 CPU COOLER: Corsair H55 + Noctua NF-F12 PWM CASE FAN: Enermax T.B. Vegas 180mm Motherboard: Asrock ITX H81 Ram: 2x4GB crucial DDR3 Hard disk: SSD Crucal MX100 256GB PSU: FSP500-50FSPT VGA: GAINWARD GTX 1070

My new build with an old Lian Li Q07: here the specs: Cpu: intel XEON 1275L v3 CPU COOLER: Corsair H55 + Noctua NF-F12 PWM CASE FAN: Enermax T.B. Vegas 180mm Motherboard: Asrock ITX H81 Ram: 2x4GB crucial DDR3 Hard disk: SSD Crucal MX100 256GB PSU: FSP500-50FSPT VGA: GAINWARD GTX 1070

Sure, here there is cinebench: http://i.imgur.com/SR7m6y8.jpg The fan that I bought is the Silverstone SST-FW141

Hi guys. sorry for the late. during the last weekend I finally finish my pc...all seems working fine but.. I got problems with cpu temps! inside the case, with the vga placed on the heatsink I have 50° on idle and 74° in full load...and I'm not satisfied about this, cause these days are cold...

Yes sure. I'll do this evening ;) And yes, you have right, the fan is the 140 prolimatech slim

First boot out of the case (just to be sure that all works): xeon 1230l v3 asrock h81m-itx scythe kodati for the cpu 2x4gb crucial ballistx sport 1600mhz evga gtx 750 ti seems working; i install Windows 10 and did some little test; actually I was testing the cpu without a...

1cm approximately

as I said yesterday, thanks to fedex the new cpu is here! http://imgur.com/a/XwLAh now let's start thinking about the remaining hardware

yes, that is, the cpu is soldered on the mobo so, to do an upgrade, I need to replace the entire set. the new cpu should be here today (thanks to fedex)...than I will decide which model of motherboard use (probably a cheaper one....I don't need to overlock or any special features)

sorry kooky; I haven't GTAV, so I can't try....the most intensive cpu games avaible are crysis 3 and far cry 3, and they run quit (not at higher framre rate...for examples far cry 3 it's around 30fps......crysis 3 frame rate is heavely related to the maps)

Thanks man. Unfortunately, due to the nature of the motherboard I can't simply upgrade my CPU replacing with another one, so I'am going to chance the combo mono+CPU+RAM.....I'll keep the case, the VGA, the pico and the hard drive...my goals will ne the same....performances, low noise and...

Stay tuned...some serious upgrades on sight....

Yes they are right; you have to use a more powerfull brick for your config...at least a 150w (200w should be better)

Cool Man! let me know how you're temperatures will be! I suppose that you'll install the 12mm fan on the top of the case, with the airflow directed on the cooler of the cpu/gpu, right?

still surprised about the performance of this j1900 + gtx 750 ti: http://hostthenpost.org/uploads/8b5a68dd45f56ce4220618f23b654f59.jpg http://hostthenpost.org/uploads/600c4b2a13d9153f0c99bb4f0deaf675.jpg http://hostthenpost.org/uploads/4729edaeb0c057acab900d79f90149c0.jpg

yes, as you can see from this article there is a performance loss using pcie 1X http://www.techpowerup.com/reviews/Intel/Ivy_Bridge_PCI-Express_Scaling/23.html despite this I notice that not all the games have the same "bandwidth hungry"; you can see in my screenshots the bus usage %, and...

A cheap powered pcie cable like this one Founded on Ebay

It's a evga gtx 750 ti SC (it hasn't the extra power connector), which fan has bee removed. from this to this ;)

yes, you have right. you can find this case with various names on the web you can try searching for "Q5" on ebay

Case: Mini pc Q5 (200w 80h 225d) Mobo: Asrock Q1900 itx CPU: intel celeron J1900 SSD: Crucial MX100 256gb GPU: evga GTX 750 Ti on pcie cable 1X RAM 2x4Gb so-dimm adata PSU: Pico psu 150w + AC-DC Brick 150w Case Fans:1x scythe slip slim 120mm

Ehilà, grazie e ciao! ;) Me too! here there are others in-game screenshots from Crysis 3 and Grid; I would like to remember that we are not talking about an high/tech game station, but it's just a gaming machine that uses less than 100w in game, and that allows you to play all titles...

Here there are just a couple of benchrmaks (from the nvidia control panel I have set "triple buffer" to On an "Adaptive vsync", so max FPS are capped to 60): Mafia2 Tomb Raider Batman Arkham City

the card is supported by the DVI screws, while the same pcie cable placed under support itself in the middle, while at the end of the pcb I put two little plastic shims that rest directly on the heatsink of j1900. despite being only pcie 1x and the j1900 for cpu, I must say that the card...

mmh I don't know.....this is not a 100% case made by myself...it's just a little mod of an existing case...

the j1900 has just a passive cooler on: and It works well, also with the gpu installed on there is only 1 fan in the system, the scythe 120mm

Hi guys, this is my new htpc/downloading station/light gaming....the sandwich itx!: based on a celeron j1900, 8gb of ram, one ssd crucial mx100 256gb and (last but not least) one evga gtx 750 ti; all is powered by a pico psu 150w and cooled by a scythe slim 120mm fan, placed on the top of the...

Hi. a quick info from the owners of this case. how long is the red line that you can see in this photo? thanks una info dai possessori del lian li q11...mi sapreste dire quanto misura la linea rossa che si vede in foto? grazie http://img41.imageshack.us/img41/2821/q1113.jpg

Little update on my mini itx, consisting in a radical modification of the internal cooling system. At first I move the H50 on the top (fan configured extraction);it wasn't easy to install because the tubes of corsair touched SO-DIMM, so I had to place the radiator on the top, with the fan...

Little update on my mini itx, consisting in a radical modification of the internal cooling system. At first I move the H50 on the top (fan configured extraction);it wasn't easy to install because the tubes of corsair touched SO-DIMM, so I had to place the radiator on the top, with the fan...

sorry, I forgot ;) I also have yet a zotac gtx 580

yes, probably you right Michaelius. I ask about that mobo cause I have the amd X6 yet, so all I need should be just buying that asus

hi: just a couple of questions. I would like to do a sli config with your same mobo (M4A98TD), an amd X6 1055t and 2 gtx 580. how perform the X6 on this mobo? can you overclock well (cause I've read about a huge vdrop on this asus)? how perform chipset 980a with sli? any issues about driver or...

nice build. what about the gpu temperature?

no. it's the camera angle, but the gpu is not under the H50: so you couldn't install a 6950-6970, cause they are too long

ok, here a couple of result. first at all this is the stability test with prime 95 blend with the cpu unbdervolted to 1.1v (but not downclocked, so 2800-3300 turbocore): http://www.pctunerup.com/up/image.php?src=_201012/20101222155428_Prime951.1v.jpg than, thanks to fermi bios editor I...

last update of my mini itx....zotac gtx 580 finally arrived! http://hardforum.com/showpost.php?p=1036591066&postcount=7

new vga arrived...a zotac gtx 580! :D http://www.pctunerup.com/up/image.php?src=_201012/20101220152343_Foto1282.jpg and here inside my mini itx http://www.pctunerup.com/up/image.php?src=_201012/20101220152427_11.jpg

I use a scythe 140mm fan, that has 120mm mounting holes, as you can see here in the specs: http://www.scythe-usa.com/product/acc/111/sm1425sl12_detail.html and here a couple of pictures of my rad before mounting inside the case: you can see the fan mount directly with screws on the h50...

as I did it ;) http://hardforum.com/showthread.php?t=1558224

yes, it could be possibile to mount the 140 fan directly to the front fan holes of the Q08, and should be possibile to use the HDD cage. actually I have almost 27cm for a vga card (I tryed with my gtx285 and it fit): now I'm waitin for cayman to see if will fit.....if not I could do any...