Search results

A plastic film sounds like a good idea. I have a couple of questions. How thick is the sheet metal? And what's the minimum/default bend-radius?

Nice observation. If I were to mount the riser behind the sheet metal (please note that the metal is ~3mm thick in my illustrations) and make a hole to fit the PEG-connector, there will be 11mm on the other side of the gpu. Would that be sufficient to fit a 90-degree pcie connector like this...

Thanks for the replies, you guys give really great criticism! As you can see there will be decent amount of space if I were to use a PCI Riser with a 90 Degree connector from a circuitboard. I also removed the 3.5" HDD as they also need a more stable operatingtemperature. Adding two fans on...

So I got around to measuring a Asus 960 mini itx and a riser. As you can see the riser will extend about 20mm with the bend of the cable, and the total length will be ca 140mm with the bend. In my renderings the gpu were 122mm as provided from Asus' website. I have been hard at work learning...

Thanks for the feedback! I'll check out solidworks. This is one of my concerns as well. Placing the disks between two heatsources might not be the best idea. The reason it is mesh all around is because i'm bad at sketchup. It was meant to be aluminium with a perforated area in the middle, but...

Hello The case will use a mini itx motherboard, mini itx gpu and an flx psu. There will be place for two ssds and one regular sized hdd. airflow will come from two 140mm fans in the top and bottom with passive exhaust from the sides. There might be enough room for 4x 40mm fans below...

Cool! I can recommend the 850 Evo for ssd. I bought two 250GB's and set them up in raid 0. I also have a 3TB HDD with a 500GB partition for backup. Loading times are almost non-existant for both programs, files and games. Here's my build: Purchased: Processor and cooler: i7-4790K +...