Search results

Close, but that has the same drawbacks as the other stuff, high cost and it only supports 50 clients.

If you break up the ddr2 memory how much are you thinking for 2 2gb modules?

I did some searching but havent found exactly what I want. I have been using dropbox and really like it but its got some drawbacks for me. My company has about 70 clients that we backup databases from. when compressed the backups are about 500mb to a gig depending on the client. We can...

TTT

Im looking to get a few computers going. I've changed my mind from an Intel setup to AMD for the upgrades. I am looking for Phenom II x4 chips. I would like to pay under 100 each. I've seen 940's for 85 and below. That is the range that im looking for. I can paypal Non CC as soon as...

I've thought about that, but then the rest of the mill, a flaker and about 40 feet of steel and several tons of corn would cut off about 60 to 80 degrees of the zone that I want to cover. The high leg of the mill has line of site to prett much everywhere I want to hit with coverage. Do you...

I've been contacted about setting up a wireless network for a feedlot/farm that wants to implement computers into their tractors/feedtrucks/trucks on their farm and small feedlot/ranch. What they want to do is have a wireless network that they can connect to from about 1/2 to a mile away from...

Just a quick question. I was thinking that it would be nice to use my tv in my bedrrom somewhat as a mirror. Anyone have an idea about how the best way to go about this would be? Nothing fancy, just an imput that i could turn to when im dressing to use my tv above my dresser as a mirror for...

good to know. I guess I'll have to look for a monitor with more than one hdmi port, or at least make sure its got hdmi and a dvi port. Thanks!

I've been thinking of upgrading from my samsung 22 inchers to the newer samsung 24.6's with the built in HD tuners. I'll have these in a dual display. I've not worked much with tv cards, but I"ve been wondering if it would be better to buy a regular monitor (maybe an LED one) and then run...

gave it a go with some of those other ideas. I used the single mode driver in nlite. i'll read over it again, but im bean on this computer. i've created 15 differnt coaster cd's already trying it. tried it wtih the drivers on the usb drive, couldnt get xp to find the drive. kept looking...

cant seem to get it to go any of hte ways. maybe im not doing the nlite integration correctly. guess i'm done with this

I've been trying for a day now to install windows xp on a toshiba satellite l355-s7915. it came with vista and the folks that im working on it for need xp for compatability with some legacy software. (that and they dont want to try anything new) I first tried just a plain old xp sp1 disk...

my girlfriend just broke her cell phone, need a cheap one to replace it. dont need anything great, just in good shape, all she does is talk, maybe a few texts now and then. phone has to work on the alltel network. would like to get this asap, let me know what you've got! Thanks

Wish I could take one home with me. I flasheded the bios to the newest version on the dell website, 2.2.6 or something like that. Still no go. I wanted to grab the chip, but my professor wasnt around this afternoon and I really didnt want to leave a dead computer in the lab without an...

Would the computer even post if it needed the bios update.

crap. I was worried about that.

I put my cpu in a dell at school, no post. its a 745 optiplex with a core 2 duo. Would that MB need a bios update to run the quad core chip? These computers are probably a year or so old. Let me know if I should throw this in a different forum. Thanks

when i got the new mb back i tested it outside of the case. I learned that you dont want to go to the work of screwing everything in until you know it all works. I've tried the sticks of ram individually and in different slots, and the memory worked in my friends computer. The processor...

I had a previous thread on here about a possible dead motherboard. I RMA'd the board back, and just received the new one. had it on the bench, got the vid card, a stick of ram, and the PSU plugged in and it still wont post. I had a friend test the PSU and the ram and vid card and they all...

i've tried all the ram individually in probably all the slots, or at lest 3 of the slots. I've rest the CMOS, and still nothing but fast beeps. Going to RMA back today.

Thermaltake tr2 430np i plugged the 4 pin lead into the top 4 of the 8 pin connector. i also threw in a ati 2400 pro instead of the 4870. Figured it would be easier to power up than the big guy. thanks for the help so far.

still get beeps with teh other psu with just the 4pin plugged into the 8 pin connector. no post.

tested the PSU on an old p4 mb and it powered up fine. I dont have another psu that i can test on the gigabyte motherboard due it it needing the 8pin power connector. pulled a 512mb stick of ram to test out of a dell and the motherboard did the same thing, no post. I havent been able to try...

oh, you guys have so not made my night. I think that the power supply is the last thing that I could be able to check. I'll check out the post codes again, but shit, this could suck if its a PSU issue. I just sent a 3 year old PSU back to OCZ that they are checking out. Thanks for that...

Sorry, forgot to say that i've checked the post codes, nothing like what i've got, or at least not that many beeps. I've tried each stick by itself too. thats why im not sure about the ram or MB. I didnt figure i could fry all four sticks at the same time. I'm waiting till I can get to...

I finally got my system up and going the way I wanted it, new build for christmas Gigabyte EP45 DQ6 Q9400 processor 4gb ocz reaper pc 8500 4gb ocz reaper pc 6400 PC Power and Cooling 750w Scilencer 1.5 tb seagate hdd Saphire 4870 512mb vid card I had to flash the MB to the newest...

Sorry, been gone for awhile and no time to work on the compuer. Bios update fixed the problem. Now all i've got to figure out is how to make my other 4gb of ram work. but thats for another time and forum. Thanks for your help, should have known to try the bios update first. havent had to...

I've got a PC power and Cooling 750 watt scilencer. I'll check the bios.

Downloaded from the ati website, didnt work. I installed vista 32 bit and its doing the same thing. I did however used the drivers off of the cd that hte card came with because I didnt have the net hooked up to download hte 8.12 drivers for 32 vista. Am I looking at another dead card? Or...

hotfix didnt work. When I tried to install it I get a "Detection driver not installed" error. I'll have to get this on another monitor this evening. That or burn off a copy of 32 bit vista and give it a try.

I hope its not the card, this is the 2nd one, first one was DOA. I'll try it with the monitor, and i've tried it with different ram last night. I'll check out the hotfix as well.

I just got in a saphire 4870 512mb version, fresh install of vista business 64. try to instal 64 bit drivers from ati website and i get a blackscreen and restart. a restore from safemode will get me back into windows, but if i try again, i get the same blackscreen and restart. I am running...

I've got some cisco 2516's i'd sell. I used them for my CCNA stuff. I'll try and figure up a price for them and the serial cables if your interested in that type of router. I dont have any switches for sale, but the routers have hubs built into them.

link?

Thanks, thats what I was afraid of. Now another week without being able to use my new computer.

Found another PCIE card, just a cheapy, no extra power connectors required. Plugged in and it worked. So I'm thinking its my card. I read somewhere that people were flashing to fix some problems like these. is that a good idea?

Took the MB vid card, psu and ram out of the case. Tried it again with one stick of ram in slot one. Still get the "you have not connected one of your video card power connectors to the power supply. Please refer to the "getting Started Guide" for proper hardware installation." error. I...

Just got in all my parts today, was in a rush so I just installed them in the case instead of trying everything sitting on the counter. When I got everything installed, cables ran, the first time I fire up the box, i get a constant beep. Screen shows that I dont have all power connectors...

I'm still waiting to know how they put the files in and at what resolution. I would say there are 40 or so pictures in the file. I didnt know if it was a wordperfect thing, or just massive files in general.