I used two sets of this: "Revoltec Ultra Bright Cold RED Light - 10cm TWIN set"
So thats 4 lights in total.
One of the sets is operable via the included switch in the third pci case slot. (below the two used 290x case slots) The second set is not operable without opening the case. I will...
Dropping by after a long time. My system has been used mostly for gaming on an eyefinity set-up since it arrived (V1). At the time there were some people discussing about running the 290x on 450 watts. I will share my experience.
I have ran the reference 290x on the Silverstone SST-ST45SF...
I have one intake right below the 290x. (not very efficient though because its right up it's fase.) You can see it actually in the picture above.
You think 2 extra case fans will stop my 290x from throttling?
Been happily using my M1 for months now.
Config:
M1 case
Intel Core i5 4670K Boxed
ASRock Z87E-ITX
Asus R9 290X 4GB
Silverstone SST-ST45SF (450W)
Crucial M500 2,5" 480GB
Adamantium reservoir
My 290x is hitting 95 degrees and throttling when I drive my eyefinity setup...
This system is useless without at least 2 docks. You need a dock at every location you want to use it. If you don't have extra docks, you need to take the dock with you to use it. Which would make the system arguably less portable than a laptop/small htpc/mac mini/etc. with less performance per...
So if the ST45SF(-G) 450w can handle a heavy i7 and a heavy GPU.
It should be able to handle the systems with less demaning hardware even more...
Lets end this discussion... the ST45SF(-G) 450w can handle ANY modern CPU + GPU unless it's a CF/SLI on a single PCB or dramatically...
I am currently running:
ASRock Z87E-ITX mobo
Sapphire R9 290X 4GB GDDR5
Crucial Ballistix Tactical BLT2CP8G3D1869DT1TX0
msata crucial m500 480GB
Intel Core i5 4670K Boxed
Crucial mSata M500 480GB
No case fans
On the Silverstone SST-ST45SF (450W).
Been playing BF4 on 3x 1080p for quite some...
The tracking information isn't very clear. I hope it's seriously out of date, because it does not provide:
Flight/Ship No
Flight/Ship date
(yet)
I couldn't stand the waiting anymore and ordered all the parts, gone build it in a randomn atx case tomorrow and transfer when the M1...
Ok, I Changed my mind again.
I'm gone run my eyefinity on my M1 case.
Therefor I will need the absolutely most powerfull set-up possible inside it.
I dare any1 to make a more powerfull system under 2 K:
http://tweakers.net/gallery/288225/#tab:inventaris
I completed my eyefinity set-up!
Thats 3x Acer p244w. So after all this waiting and thinking out my M1 build, I'm afraid that I can't power my set-up with anything fitting the M1 :( I think the max resolution for high setting gaming will be 2560x1440 in the M1 with current availabe...
Tell us more
How many watts is your PSU? What CPU do you have? (total system specs would help) How is the heat in your case, what temperatures under load? Do you care about the electricity bill? Do you prefer a silent system? What games do you play and are you gone play in the future?
If your...
With the HD 7990 being available for less than 600 Euro's/dollars now, isn't that good performance per dollar and the only realistic GPU to handle 3x 1080P and 4 K resolutions?
Ofcours the PSU will have a hard time.
http://www.techpowerup.com/reviews/amd/hd_7990/23.html
In normal gaming...
hmmmmm
290x water cooled
4670(/4770)
450w silverstone bronze
8gb ram 1600(+) Mhz
h100i/h220/etc. with extra loop trough gpu
samsung evo ssd xGB (x = budget)
Something like that...
I'd be supriced if some1 can come up with a system that will produce more fps without spending hundreds extra...
A warning for people that are already ordering hardware for the M1.
Don't! Especially GPU's as new prices of all gaming GPU's will settle much lower as of NOW. (AMD's new lineup is now live)
Order when u have received the case! Maybe a good deal on watercooling or something, but the rest of...
Im gone put an Ati 290x with watercooling in my m1.
(http://www.overclockers.co.uk/showproduct.php?prodid=WC-458-EK)
Can you make a package deal for something like:
1) All necessary tubes, fittings etc. for watercooling a CPU and GPU with eligible lenghts for the M1
2) Pump, fans, etc...
The sg05 is a really good case. I'm actually considering buying it right now...
I am long due for a PC upgrade, currently sitting on an intel q6600 CPU and Ati 4850 GPU. The q6600 is being cooled by an old air cooler thats strapped to some screws that I put trough the holes arround the cpu on...
Necere and Whaha360,
Halfway trough all pages (yes i've read em all) I was already admiring the effort you two went trough answering Alllll of those questions. As I see it the two of you fullfilled two jobs.
1. The entire process to get the Ncase M1 to the point where it's (almost) ready...
I do not really care about cable management, ill cut unnecessary cables and hardforce the rest somewhere between. I wen't with that model for less decibel.
So what would give more silent operations? I might look into modding the SFX PSU. Thanks for pointing out that it won't fit :D
Yes I...
I wen't trough all pages and had a REALLY good time reading through changes, ups-downs (more ups), planning and finally a successful indiegogo. I ended up buying in the aftersale period on http://www.ncases.com/. (started reading the forum after the indiegogo was closed.)
W360 and Necere, you...
Yippie Ka Yee motherfuckers!
I'm a tech freak and wanne build something insane in this case!
I'm gone read trough ALL of the pages on my mobile in the train to and from work everyday.
I was planning on a fx-8350 sli 770/7970 build before this case got my attention. Now im planning on...