Search results

  1. F

    RAW V3: ATX + 2x300W (AC-DC HDplex) + full size GFX in 8,0L

    Update #3 So after some time working with the parts I finally got them ready for assembly. First a test fit with the Rog Apex X motherboard (~26,7 cm width). The assembly of the case (rather simple :sneaky:): With countersunk screws and T-sections to keep the case together (along with Parvum...
  2. F

    RAW V3: ATX + 2x300W (AC-DC HDplex) + full size GFX in 8,0L

    A little teaser: So the parts have been cut. Will see when I will have the time to cleaning, file and tap it. Also this is the motherboard that will go in my test system (Asus Maximus X Apex): And this lovely Dynatron R15 + NF-A9 will cool the I5 8600k :)
  3. F

    RAW V3: ATX + 2x300W (AC-DC HDplex) + full size GFX in 8,0L

    Hello everyone I'm Simon and I have been interested in SFF PCs for some years now. It started out with Unobtainable, then a SG09 mod that got replaced soon after with my own case designs. At the time there wasn't any real SFF cases so I looked into the option of using a laser cutter and assembly...
  4. F

    Project RAW v2.0 [Scratch ITX/mATX build]

    Update! So, the assembly took a little longer than expected. The CPU power position on this P8Z77-I made it a little complicated (close to the pump) and the sleeving on the 24 pin from corsair had to be removed in order to spread the cables out so they could fit in the 5mm clearance between the...
  5. F

    Project RAW v2.0 [Scratch ITX/mATX build]

    Hello So in the past year I have been doing some designing and creating some small cases in wood, acrylic, and aluminium. Some have failed, others worked great. However those that worked just wasn't good enough for me. But I think this one comes close :D It follows my last project: Project RAW...
  6. F

    Extreme TEC chiller experiment with Antec

    So putting all of the TEC's together takes a little more time than expected. First apply a thin layer of Antec's Formula 7 Thermal paste to get the best transfer of heat :D And then make a sandwich of CPU coolers around it: And then connecting them all: My fingers was quite...
  7. F

    Extreme TEC chiller experiment with Antec

    Okay, so some good news (and a bit of bad news). The PSU's arrived a little time ago from Antec (thanks again :D ). Three lovely Platinum PSU, two 1300W and a 1000W: Modular and OC link so two PSU's can run together :thumb: And enough power for the TEC's and stable power for the...
  8. F

    Extreme TEC chiller experiment with Antec

    So, long time no see. I'm sorry for this interruption in this build log/experiment but my studies and personal situation needed some attention. And sadly I haven't been able to locate anyone with in Denmark that could and would help me making the waterblocks (had one for a few months until he...
  9. F

    Extreme TEC chiller experiment with Antec

    So that last of the watercooling gear have arrived :D I would like to thanks aquatuning.de for there sponsorship of these parts along the parts for the SG09 build :D But back to the good stuff; As I said, I do no believe that radiator cooling will be my bottleneck, and here's why: One...
  10. F

    Extreme TEC chiller experiment with Antec

    Sorry, my time have been limited :( But should take up speed now :D
  11. F

    Extreme TEC chiller experiment with Antec

    Hi all Now with Christmas over and exams, I'm once again back to hopefully finish this build and the TEC cooler. Also Happy New Year :) This update isn't a big one, but I am in need of your help :) I'm not at big water flow engineer, so if you got any ideas for at better water block for...
  12. F

    White SG09 with power and watercooling

    Hi all Now with Christmas over and exams, I'm once again back to hopefully finish this build and the TEC cooler. Also Happy New Year :) This update isn't a big one, but I am in need of your help :) First of, I got the plexi for the window cut out. Just like the windows for my...
  13. F

    Extreme TEC chiller experiment with Antec

    Don't you worry about the cost or power for these TECs Let me handle that, so you can sit back and enjoy the show :D
  14. F

    White SG09 with power and watercooling

    Hi, I'm sorry that I haven't posted for some time, but there haven't been that much to post about, since my time have been very limited, and the free time have been used to get another "chilling" project up and running with some TECs. You can se more of that here, and since the chiller will...
  15. F

    Extreme TEC chiller experiment with Antec

    So I have come a bit further in with this project :D The following wasn't meant for this chiller, but for my SG09 build that was planned long ago. That's also why they have the colors that they got (not Photoshop, but spray painted). And yes, that is a Phobya External Radiator "Bench...
  16. F

    White SG09 with power and watercooling

    Sorry for the long time, but the project haven't been updated, since my time I short, and I have been working on getting something new up (which will be used for this build). You can see more here; http://hardforum.com/showthread.php?t=1789420 But there will be a update this weekend :D...
  17. F

    Extreme TEC chiller experiment with Antec

    Last weak a heavy package came (guess from who :D): And within that a few more packages; Can you guess what is inside those packages? If you thought fans, then you were right :) And lots of them :D (56 of them to be precise) Some nice fans with Double ball-bearing and...
  18. F

    Extreme TEC chiller experiment with Antec

    Hello, and welcome to this experiment to get as cool temps in my rig to get the highest overclocks as possible :D First of all, I would like to give a big thanks to Antec for making this TEC chiller experiment possible :-) And Monsoon for some fittings: As said, the point of this...
  19. F

    White SG09 with power and watercooling

    Hi Guys, sorry it have been such a long time since my last update, but due to Holidays it have been more difficult to get the last parts (which isn't even here yet). But I got some new information to share; First of to those who questioned the painted motherboard; I had it out of...
  20. F

    White SG09 with power and watercooling

    Thank you. I was thought for sure that the motherboard was dead (i mean look at it, all that paint!). But surpriced I was when it worked :D
  21. F

    White SG09 with power and watercooling

    So, I have actually been rather busy these days. First of a lot more painting. Got the rads finished uo quite nicely: But also some smaller stuff in the build. And also a more challanging one; the motherboard. First taping all the useable parts in (socket, RAM, PCI and so on). Then...
  22. F

    White SG09 with power and watercooling

    Not glossy, just some White spraypaint :-) New update tonight (and it's BIG). It have been raining here in DK, so painting haven't been a option until yesterday (sorry for the delay)..
  23. F

    White SG09 with power and watercooling

    Thanks, but I'm already done, and I like the end result. (Again, the ugly once will not be visible once installed in the case)
  24. F

    White SG09 with power and watercooling

    Yup, I needed a hard Sharp thing, a pencil worked just fine ;)
  25. F

    White SG09 with power and watercooling

    So, it have been a while since I updated you last. not becourse I didn't want to, there just haven't been anything to update you about. But that have changed, and I got more time in these days, so the speed of this build will increase :-) Today, the last layer of paint got on the case and...
  26. F

    White SG09 with power and watercooling

    So, Im sorry for the wait, my time is very limited at the moment -_- I have though made a little progress; First of, some nice big windows have been cut out with the new dremel. There will of course be installed some Plexi class in those ;-) Not sure, if it should be with glue or some...
  27. F

    White SG09 with power and watercooling

    So back from my trip, and I had a package waiting for me :-) It was Fractal Design's new Newton R3 1000w white PSU, that Fractal Design have sponsored this build with ;-) Only thing is that they have lowered the value of when the fan starts spinning from 50% to only 25%. Perhaps some of...
  28. F

    White SG09 with power and watercooling

    Thanks both of you, but the best is yet to come ;)
  29. F

    White SG09 with power and watercooling

    First installation of the hardware and pumps in the case :D There isn't that much to say. You should begin to see what my plan is with this build according to fitting it all in that small case ;) IT FITS! yea, I was worried about fitting the pumps like this, but with a few mm to spare...
  30. F

    White SG09 with power and watercooling

    They are really nice with option of some great lighting effect :D Thanks, well Unobtainable was also hard to create, and I do believe there is more room here ;-)...
  31. F

    White SG09 with power and watercooling

    Hello, ones again So my latestet build; Unobtainable was a great PC to build, and it got a lot of positive feedback, thanks guys and girls :thumb: But my eager to create something new, and also a (hopefully) better looking build. So I will hope you will follow this build as well, and...
  32. F

    Build log of "Unobtainable" - X79 in a white Bitfenix Prodigy

    Thanks guys :D I hope my next build will look even better.. Well I believe it will :eek:
  33. F

    Build log of "Unobtainable" - X79 in a white Bitfenix Prodigy

    Hi Guys, Im sorry that I have been away a longer time but my studies have really been pulling my hairs :-( Any way, Bench and such, well it turns out that the motherboard can't really OC. Been ad it for some time now but, when I try to set a higher multiplier in the old BIOS it doens't...
  34. F

    Build log of "Unobtainable" - X79 in a white Bitfenix Prodigy

    Hi guys.. So It have been a bit quiet from me lately, but I have had an exam I also had to study for.. First off: You remeber the all of a sudden leaking from the flowmeter? Well it seemed to be the o-ring sitting badly, so tried fixing it but no luck. So it goes out of the system...
  35. F

    Build log of "Unobtainable" - X79 in a white Bitfenix Prodigy

    Thanks, but that's the original software..
  36. F

    Build log of "Unobtainable" - X79 in a white Bitfenix Prodigy

    Thanks all Th leak on the flow meter seemed to be a problem with the O-ring. Tried to fix it but it still leak. Didn't really need it as I can see via the pump how fast it goes (RPM). It was more for the look, but it will actually also to good (maybe better) with out. give it a more clean...
  37. F

    Build log of "Unobtainable" - X79 in a white Bitfenix Prodigy

    Hi guys I have tried to take some more show pictures of Unobtainable. (still trying to get the perfekt UV picture. might go with some external UV light next time). Because I got a Non EK reservoir I can't enter the Limited CSQ catagori (but the Open CSQ), which clearly is the best place...
  38. F

    Build log of "Unobtainable" - X79 in a white Bitfenix Prodigy

    Yes I got the software to controll the fans and see temps. But not working just they way I hoped, but it functions just as well as an normal 5.25" fan crontoller, so it's fine ;-) But see last post for more info on the temps sensor problem
  39. F

    Build log of "Unobtainable" - X79 in a white Bitfenix Prodigy

    Thanks. I haven't got to test it just yet. The heatmaster I will just use to control the fans, which it's good at. But I haven't got that much time to play with it yet :D only thing is that you cant make a custom fan setup to follow like CPU temp. it has to be the temp sensors which I did...
  40. F

    Build log of "Unobtainable" - X79 in a white Bitfenix Prodigy

    So here is the pictures of the build with UV light on. It is pretty deficult to take really good a UV picture (looks better in real life), I will try some more settings, but if any of you got some please share :D Maybe some more light around the build next time I cant show the...
Back
Top