Search results

  1. Zoson

    WTB/WTTF: i7 6950x

    bump
  2. Zoson

    WTB/WTTF: i7 6950x

    Looking to max out my x99 rig. I've got verified Paypal/Cash in person. I've also got various hardware FT: Rampage 5 Extreme - has all accessories except the OC Panel. No original Box. i7 5960x used, no box. 32gb Corsair Vengeance DDR4 3000MHz CL15-18-18-35 5x 3TB WD Red Drives(no warranties...
  3. Zoson

    NVIDIA Controls AIB Launch and Driver Distribution @ [H]

    I'd say mark it up reasonably and send it to them anyway. See if they execute it. Worst thing that can happen is they don't.
  4. Zoson

    HWLabs Nemesis radiators are garbage.

    Wrong again. Seems to be crossing the line of intentional trolling. You can very clearly see that I stated the GTX was 20 and was reduced to 16, as well as the GTS being 32 and being reduced to 16. You literally have no argument. Anyone who did real performance testing found that the GTS...
  5. Zoson

    HWLabs Nemesis radiators are garbage.

    Nice super fail. I was responding to your complete wrong information that the GTX was 16FPI all along. It was 20FPI previously and has been reduced to 16 along with the GTS. You have nothing. Literally nothing. You're so blatantly wrong that you're grasping at straws making up crap... AGAIN.
  6. Zoson

    HWLabs Nemesis radiators are garbage.

    Actually, NOWHERE did I assert that it was the highest performing overall radiator. The only assertion I made was fin density in the same formfactor was reduced. Which would directly affect performance if you use sufficient fans. Sorry, you're arguing with someone who clearly knows more...
  7. Zoson

    HWLabs Nemesis radiators are garbage.

    This argument is totally bogus. Anyone who cares about idle temps at low rpm has no idea what they're doing. You can idle at 50c and it will be no detriment to your processor. It's at high load when you're running 100% on 16 threads and you want to stay below 70c that watercooling matters...
  8. Zoson

    HWLabs Nemesis radiators are garbage.

    Did you even actually read my post? SR2 is low FPI, GTS used to be high FPI, and GTS is now mid FPI. None of what you said makes any sense at all in context of the discussion. It looks more like you just wanted to talk about your setup in someone's post regardless of the topic. Thanks for...
  9. Zoson

    HWLabs Nemesis radiators are garbage.

    The old GTX was 20FPI also. The new is 16. The GTS was 32, and now is 16. The SR series was 9, and remains 9. The point of all of this is the fin design did not change, and the overall cooling capacity has been reduced vs the last generation. The product line has collapsed and is no longer...
  10. Zoson

    HWLabs Nemesis radiators are garbage.

    thanks for the rec. I'll look into it. The HWLabs GTS radiators were *always* the highest density offering they had. The SR series was always the low density offering. The problem is that the GTS series was always their high density offering. Now it's not. GTS were always for high fan...
  11. Zoson

    HWLabs Nemesis radiators are garbage.

    I made the mistake of buying a few 120 GTS and 240 GTS nemesis radiators without closely comparing them to the older variants. Here's a summary of why they're total crap compared to the older ones. 1. Reduced performance compared to classic GT Stealth due to reduced fin density. GTS Nemesis...
  12. Zoson

    :)

    :)
  13. Zoson

    Anyone have a WD Passport X 2TB?

    Was wondering if anyone had tested this drive with CDM and the like? I found thread on reddit that showed it was significantly faster than a WD Passport Ultra 2TB. Also, the X has a black sticker on the box, unlike the green sticker on the Ultra. So it should be a very high quality drive...
  14. Zoson

    ASUS Announces ROG SWIFT PG278Q Premium Gaming Monitor

    I've never had any problems with SLI.
  15. Zoson

    1366 x58 Xeon Enthusiast overclocks club

    This is rapid mode. It uses a ram cache for your ssd.
  16. Zoson

    970/980 Custom bios flashing now working!!!

    If you want to enforce a minimum voltage at P00 state you increase the '600' to whatever the value you want as the minimum. This will cause an increase in power consumption. Alternatively you can increase the minimum voltage state at each CLK within the voltage table to whatever your card...
  17. Zoson

    970/980 Custom bios flashing now working!!!

    Hey guys, You'll want to use either the AIR or H2O BIOSes going forward. AIR sets the same 1480MHz clock that GameStable set previously, and H2O sets 1531MHz, two bins higher than NOLIMITS. Both use 1.312v for the maximum boost state. Boosting behavior should also be significantly better...
  18. Zoson

    1366 x58 Xeon Enthusiast overclocks club

    Key words: "don't correctly support" Yeah, the MINIMUM uncore ratio is 1.5x memory speed for Gulftown/Westmere, but you can run it faster. Your board was designed for 45nm cpus which has a minimum uncore ratio requirement of 2x memory speed. See if lowering your memory from 1000MHz to 800...
  19. Zoson

    1366 x58 Xeon Enthusiast overclocks club

    If you're on the latest bios you're SOL. This is part of what I was talking about when I said that older x58 motherboards don't correctly support the Gulftown/Westmere architecture. You either need a BIOS update with microcode to support 1.5x Uncore, or your board simply physically can't do...
  20. Zoson

    1366 x58 Xeon Enthusiast overclocks club

    Truth be told, I would run my chip all the way up to 100C and it didn't seem to make a difference. 21C Ambient, 90C highest core: 4.8GHz + 3.8GHz Uncore at 1.5v 26C Ambient, 98C highest core: 4.6GHz + 4GHz Uncore at 1.48v Also shows how much a higher ambient can affect your temps and limit...
  21. Zoson

    Possible fix for GTX 970/980 Voltage Discrepancy & Driver Bug thread

    strix isn't a reference card.
  22. Zoson

    Possible fix for GTX 970/980 Voltage Discrepancy & Driver Bug thread

    I fixed this stuff in bios for reference cards. http://www.overclock.net/t/1517316/extract-and-flash-gtx-970-and-980-firmware-zosons-h2o-and-air-custom-bios/0_50
  23. Zoson

    970/980 on x58 Motherboard

    980 works great on my rampage 3 extreme.
  24. Zoson

    FS: Golden 990x, R3E, DDR3, Seasonic X1250, Unlocked iPhones, H2O Parts, Fans

    Two of the modules are *actually* 999052. One of the replacement modules is 999057, but runs at the same 999052 speeds of 1866Mhz 9-9-9-27 1.5v Good question, adding to the OP to clarify. Thanks!
  25. Zoson

    ASUS X99 Motherboard Series - Official Support Thread

    Using AI Suite because I'm forced to due to the UEFI bug where QFAN always run the CPU Fan headers at 100% and they cannot be changed. It's the only way I can get my CPU Fan and CPU Opt headers to run at any speed other than 100%. I installed all of the asus utilities from both the disk, and...
  26. Zoson

    ASUS X99 Motherboard Series - Official Support Thread

    @raja a little help would be nice here. Been asking for assistance with this since the board was released. I actually don't even have an IDE controller installed. All I've got in my PCIE slots are my two GPUs themselves. So I have no idea what the A8ZHIIJY controller is or where it's coming from.
  27. Zoson

    1366 x58 Xeon Enthusiast overclocks club

    Try to keep up! He already figured out it was the windows setting in MSCONFIG.
  28. Zoson

    1366 x58 Xeon Enthusiast overclocks club

    QPI voltage too high was the #1 cause of death in 32nm first gen i7's for overclockers. The reason is because they existed side by side with 45nm first gen i7's, and the 45nm first gen i7's could handle more qpi voltage... a lot more. I ran several 45nm chips at >1.5v QPI to get my 3x4GB...
  29. Zoson

    ASUS X99 Motherboard Series - Official Support Thread

    Doesn't matter, a V2 plug fits into a V1 socket. The physical pinout is identical. V1 PEG6 only had 2 12v conductors. V2 PEG6 has 3 12v conductors like PEG8. Pretty sure this was done so that V1 PEG6 couldn't be used in '6+2' fashion because it would be lacking the third conductor and not be...
  30. Zoson

    ASUS X99 Motherboard Series - Official Support Thread

    Take off the extra 2 pins and it should fit totally fine. I still have not heard back regarding these devices: I can't figure out what this unknown device is... It's obviously something on my motherboard, but none of the drivers on the disk or downloaded from the site clear this unknown...
  31. Zoson

    1366 x58 Xeon Enthusiast overclocks club

    stop code 101 = give more vcore stop code 124 = give more qpi at bclk >180, if your board supports it, you might find better stability with reduced CPU PLL. Some boards allow CPU PLL down to 1.2v. My 990x was significantly more stable at high BCLK with 1.35v PLL than 1.8v PLL or 1.9v PLL...
Top