Separate names with a comma.
Removed the two Coolit pumps and replaced them with :
Bitspower Z-multi red 40mm res...
some small adjustments in rig,
so really everything is how i whant it :
this res comes in place of the top Coolit pump,
and the one under it...
some pics of extra PhysX vga that arrived,
some adjustment on fan, fan did make noise above 80%, fixed
New cooling paste on GPU = Evga...
little update, needs some finishing off, thirth vga adding for PhysX, bodem plate placing in, and remove dust :
yes, but not with this mobo, costs a little to much for that, that's why i made 90° connector for it.
that's the idea ;p
Small update :
Little update : Next copper bars are bended the same and almost on the good lenght, and 2 PciE connectors are almost ready to :
I is not finished yet, it need to be insulated offcourse and the solder work need to be clean also and get back.
thanks, always on the look out for mods that are never been done
update, first is allmost finished, need some detail work done, and made black, but it works like a sharm and no cables there anymore :
like this the connectors will be :
each vga 2 connectors, but behind each pair there are 3x 12v rails.
So vga's will get enough...
Last stuf making for vga's, making 5 more of these, cut them on lenght, other side also connectors,
isolate them, make them black :
RETAIL toy now : http://www.evga.com/products/moreInfo.asp?pn=100-UT-0400-BR&family=Accessories%20-%20Hardware&sw=4
There's a new baby coming to me, a Evga GTX285 Classified 1Gb vga, just for PhysX in my rig :
then i will have all Classified...
It's a 10 Phase Volterra VT1185mf and 3Phase Dr.mos.
Evga will make them retail but as 8 Phase Volterra only that Rev0.2 that can deliver...
I tested last weekend a Untouchables Rev0.1 10+3Phase mounted on a Evga GTX285 for the GPU.
first i tested it on Dice, to see how it reacts...
‪Front mod stealth dvd drive on Level 10 +Evga SR-2‬‏ - YouTube
Got a new toy in the house, and tried to make nice pics of that 960Gb monsta and some nice pics in my case :
Got a new sponsor, he send me already a nice package ;D
Thanks to Eddy of IT-Service
Nice and good packed, and a triple sli...
soon i hope to give new updates as the new mem, vga's and hdd are in the house.
Killer2100 eifinally in the house,
original cover removed for modding it,
and here a pic of the killer2100 in operation with two red led's, what...
Am working now on the last mem flames, did the cables in the backpanel better now, so the back-panel is not round anymore,
and made some led's...
little sneakpeak what i'm doing now :
Most of the time, people put there powercable for vga like the RED arrows.
I whant it as clean as...
here are the load temps, cpu temp in Coolit software is not correct, cpu isn't supported by the coolit software.
As you see idle the coolers...
thanks, more pics will follow when vga mod is ready
here an update of my temps with OC :
little update :
last minute adjustment for the vga's :
It's a miracle !!!!
i get it closed hahahahaha, +200m cable in limited room of 3,5cm lol :
here you see that the plate is a little...
i'm going to fill up the loop now the 3th pump is installed, own mixture : 25% Ethylene Glycol and 75% PURE water, no demi.
what you see in...
small update, got at last the snake connector in, so the 3th pump can be fitted and the loop closed,
ready to fill it up.
left of the pump you...
today had some fun to make some more Dominator GT flames for my memory :
i'm busy on a little mod for the memory, lasered alu, and some handwork, need base and color paint :