Search results

Looking for an am4 bracket. Setting up my old motherboard for my kid and I lose the bracket needed to install simple air cooler. Before I buy one off Amazon figure I would ask if anyone had one in South Florida.

Trying to get most out of this card. It is 6900xt toxic extreme. I had to do a repast because sapphire paste sucks. I know timespy doesn't mean much but overall pushing 2750 on average in most games. I have mpt set at 400 watts and 395 amps. I upped a few of the clock speeds. Seeing if anyone...

Nothing old of a system but adding in mine.

I was following a thread on evga forums of people buying those to chill 2080 ti for benchmarking. Seems was a still pain with condensation.

Figured add a quick benchmark at 5.3ghz. https://www.3dmark.com/spy/7927285 Figured why not lets see if I can hit 5.4ghz no avx. No clue if it was stable only a benchmark run. Had to use 1.46 volts to do it. https://www.3dmark.com/spy/7927511

Do you use avx or avx2 for testing?

Had to up voltage to 1.34 in bios. Still at 5.2 no avx offset. Average temp under real bench is still 66 to 69. One stable in realbench will move to prime95.

I prefer the ml for radiators but then I run 60mm thick or more. The white ll120 whatever reason have a higher static pressure.

Currently stress testing at 5.2 no avx offset at 1.32 volts in bios. 10 minutes in and temps didn't even go up past 5.1 test.

Well had decent drop in temps, next test is more voltage and higher clock and see. Before After

Those 2 videos are best I have seen for spreading thermal paste. Still wondering if I should put liquid metal on waterblock and die or just the die.

Ahh, thank you, I miss understood.

I got the one in the kit from Rockit. Honestly I had used his delidding tools before and always were nice. It was a whole kit one shot and little lazy factor in there. One order done.

Has anyone done direct die cooling here for a 9900k or 9900kf? Like I said I am not putting the ihs back on. My ekwb block is pretty flat for all test with dial indicators. Looking around most seem only to put the liquid metal on the cpu die, none on the waterblock. Is this the best way or...

That's prime temps. Handbrake is alittle lower. Once stuff gets here will post screenshot before and after.

Yes, just delidding is not worth it if going to put the ihs back on. It gives maybe 4 to 5 degrees at best. Delid and direct die with waterblock is. The ihs is not going back on. At volts needed for 5.2ghz temps hit 85 to 87. Little hot for me. Most had drops with direct die to waterblock of...

Well I can hit 5.2 but heat becomes a problem. Why I want to goto direct die cooling.

Cooling cpu is an ekwb velocity with ek xe 360 rad. As in original post in 70's with avx - 1. The chip has more in it just summer heat sucks and I have always thought cooler is better at any speed.

Will now Tuesday when I get the rockit89 kit in.

Yep, did a lot of reading and even went up to performance pc shop as they are hour from me. Seems solder is soft enough and I will be using the quicksilver solder remove method instead of razor blade.

Anyone yet on a 9900k or 9900kf do direct die cooling? Wednesday parts come in to try. Right now I have my 9900kf at 5ghz @ 1.295 volts in bios, load about 1.27. Current temps in realbench top 68 degrees, prime95 I hit 76 to 77. Any tips by anyone that has done it.

Here is hoping the 2nd system will be up for next spring and my new work systems. 2 Threadripper 2990wx. Each with lower end quadro rtx cards but still. For work nice upgrade, two current systems are old 4700k and a quadro card that is same as 750ti. Huge upgrade finally. Cut time on builds and...

The system with those other 2 is down. The cards are fine and everything else is but the motherboard. Currently in rma land.

I put up my 2080 ti into it. Don't have my other system running that has 2 so can't do as much.

I am using one in a new build. I want the RGB to work but do not have the iris mb link. Anyone know which wire is what or have taken apart the mb link. Hopefully see pictures of it and can figure it out as I do not want to just plug it in and hope.

Just got a set in of 4x8gb pc3200. This was what bios auto set for timings and currently testing. All I did was set ddr4 voltage to 1.4 and training to 1.37. Any tips to get more out of it? Should add this is on gigabyte z390 auros master with 8700k that maxes at 4.9

I will join you all at midnight once I get home. azrael.arach - azrael1811

I know I am close to top for my evga p2 1000watt with 2 2080 over clocked decent. Can't pass up that 1600watt.

Yes native 4k monitor. Weird as you are running 2 2080ti in sli and I am just running 2080's in sli. You should be higher then me. One difference I see, and I see it in any comparison with me using 2 2080 against 2 2080ti is the windows version. Seems latest is doing something and boost the...

Here is rise of the tomb raider. Under dx11 sli, it was horrible frame rates compared to dx12. This was at 4k, max settings. I did notice slight pauses in it where frame rate would drop. So far only game I have seen that in.

Here is my superpostion at 4k

Superpostion benchmark I am cpu limited at 1080 medium. Never saw both cards over 80% really. One would be 80% other like 50%. If i goto 4k I get 90% both.

I know most dont like 3dmark. Thats fine, what is weird is how high my graphics score is compared to overs right now. Any idea?

I use a millright carve king with their vacuum table at work on carbon fiber and aluminum. Have had zero problems and it holds a good 0.001 tolerance. I get my endmills for it from think and tinker. Been debating ordering their new larger one.

Running an EVGA 1000watt P2 and it doesn't even blink an eye. Total load while heavy gaming is 781 watts and there is zero voltage drop from powersupply.

Got this game about 2 weeks ago. Up to level 46 without boosting. Enjoying the game a lot. Now trying to find a clan and it seems impossible. Everyone I applied said no, need 500+ power and experience in raids and pvp. Anyone know a clan willing to take a newer player that wants to pvp and raid?

As to game itself, it is a big nah for me. Finally got my 1080ti in sli working right in dx11. I haven't seen anyone else post numbers so here is a screenshot. I was between 108 to 130fps at 4k with everything set to ultra.

I am moving my systems to new one but I can't get my cloud servers to attach to it. Nevermind, dumb mistake. Copied a space into the auth key.

I got in late on the yoyo one but I was there. Tomorrow I can throw up another 8 to 16 cores to it. Funny part is I posted I had $800 in google cloud credit. I was wrong. After last projects and few free extras I am at $2800. So those cloud servers will be going for awhile no funding needed.

Well now running 3 8 core xeon systems and my 8700k in the mix. If cpus are needed elsewhere just tell me.