Search results

Does does that benefit in ZFS, since I thought that feature only worked by talking with the RAID card?

Thanks for the info ChristmasGT, hopefully Seagate will take the hint one of these days. Right now I'm looking at either the WD Reds or Greens. I'm kinda leaning towards the greens cause I don't run in RAID, just off an HBA. So I don't really benefit from their feature that stop the drive...

Here is the data: https://www.backblaze.com/blog/hard-drive-reliability-update-september-2014/ @drescherjm you are correct, but I think HGST is owned by WD. So we are both right ;)

I'm RMAing my 3rd Seagate drive in 2 months. Had two zpools, one will a mix of WD's and seagates, and one with seagates only. Two drives in the seagate only pool failed, and now the only seagate in the WD pool is failing. Never again seagate, never again. Too bad I bought them before the...

Ok, so I got the new drive yesterday. Took out the old one put the new one in. Unforunately "someone", who shall rename nameless, decided to reorganize the power cables and not plug-in one of the other drives in the vulnerable array. So now when I try to mount the pool I get: cannot...

Seagate has been notified, replacement drive in the mail.

No, just the READ WRITE CKSUM results have been cleared

pool: tank0 state: ONLINE scan: resilvered 64K in 0h0m with 0 errors on Wed Jul 9 09:48:14 2014 config: NAME STATE READ WRITE CKSUM tank0 ONLINE 0 0 0 raidz1-0...

I could try disconnecting those devices (sdk and sdb), but I'm not sure if that will do anything.

Thu Jul 10 10:54:27 EDT 2014 sda Serial Number: S12PNEAD312575M 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 195 Hardware_ECC_Recovered 0x001a 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x003e 100...

All the drive are marked as PASSED, I'm running an extended test on the oldest drive.

I've done tests as well with just a single DIMM. I'm leaning away from RAM because it would have caused problems before I added the new VDEV

I recently added a second vdev to my system, 4x2TB disks to the machine. Unfortunately the system now will randomly freeze, usually after 3 or 4 days. It was running fine for about a year now. I'm not really sure where the issue could be. Anyway here are my specs: CPU: Core i7-3770...

I'm running two zpools with ZoL, one is version 28 and one is the most current. The message: status: The pool is formatted using a legacy on-disk format. The pool can still be used, but some features are unavailable. is getting annoying. Is there any reason not to upgrade...

I want to be able to watch Live HD TV from Comcast including such channels as HBO on multiple XBMC machines. My current setup is: -Basement server running Ubuntu 12.04 serving all media -3 XBMC Linux end units connected to TV's My questions are: -What additional hardware do I need and...

Specs plz FLECOM :D

Sweet setup! How is the playback performance?

Cool thanks, will free up 10GB for other VM's to use

Played musical slots with the DRAM, found the bad sticks. Been running without reboots for 4 days. Without Dedup enabled, do I really need 1GB/1TB of memory for ZFS?

ESXi just doesn't wanna work for me. So disappointing. I really doubt a 48 hour memory test will help, but at this point I really don't know what else to test. I've run it without the M1015 and it still reboot or freezes randomly

I want to setup my current passthrough to just be a NFS share to all the VM's. I know it's possible, but I would like a little guidance from some docs :(

I've been playing around with SmartOS, but the documentation leaves a lot to be desired.

Version 28

Are there any other solutions besides ESXi for virtualization where I can use my existing volumes on the M1015 (I don't wanna lose the data)? Like SmartOS?

Ran Memtest+ for 12 hours and no errors :( Gunna try removing the raid card next

Yes it's completely unresponsive, none of the keys respond, the screen remains dim.

Pretty sure this is a memory issue. When I run just two VM's the machine stays on fine, but once I start increasing the workload (aka RAM usage) with more VM's the machine eventually crashes. Originally I just did a single pass with MemTest so I'll be doing three passes later in the week.

Do you currently stream movies to your PS3 from the NAS?

All of the VM's are running from a single SSD. FreeNAS just provides NFS and SAMBA shares to the VM's. vmkwarning.log: 0:00:00:04.193 cpu0:4096)WARNING: Cpu: 2165: Cache latency measurement may be inaccurate min= 180 max= 284 avg= 210 0:00:00:04.216 cpu0:4096)WARNING: CacheSched: 803...

Do any of the host logs contain the PSOD errors?

Memtest+ came back clean, so the memory is fine. Could this hyper-threading cause these issues? I have an Intel i7-3770

Greeting, I recently built an ESXi whitebox, with a M1015 passthrough to a FreeNAS 8.3 VM. Unfortunately I've had the host start freezing up on me a lot, usually after either a few hours or a few days. The logs don't give me any obvious warnings, so at this point I'm kind of unsure on how...

You mean after it's flashed? Cause the stock card (with the factory firmware) just comes up as an unknown device in OpenIndiana

IT mode is the only mode supported for that card?

I recently decided to use napp-it with OpenIndian. Does it require that I flash my LSI SAS 2008 card to IT mode, or can I leave it as it is? Does OpenIndiana require additional drivers to support this card?