Ok, I fixed the recessed light tones and colors. On my XPS8900 it has HDMI and DP out. Both of those caused the recessed light tone colors. When I switched to a startech USB 3.0 to dual DP adapter, the colors are back to normal on the monitor. It almost was as if the computer HDMI and DP...
Hello, I have dual Dell U2720Qs I am using for work at home, youtube and no gaming. I've hooking up the displays and getting everything configured correctly in Windows. I've also gone into the settings since the display was a little to yellowish to me.
I am in RGB mode. I've taken R and G down...
Thanks, that seemed to do it. In windows sound, it was set on 5.1. I turned it back to stereo and made sure that full range was checked. Went back to a video that had playback issues and its normal now.
Guys, I have noticed that I get sub frequency (what audio is routed to the sub) only when playing back certain YouTube videos. I think I have seen this once on a video outside of YouTube as well. Most of the YouTube videos play back 2.1 channels fine, but on occasion, I run into some that do...
If I had a desktop system with a 4k monitor (probably scaled to 150%), then I opened a full screen RDP session and connected to a laptop system to do lots of office related work, what would that look like? Also, if I started to work back on the laptop screen, local to the laptop, would the...
What are the differences between these 2 cards? What does the $10 extra get you? A bit higher of a core clock and a slightly longer card? Wondering why they made these 2 cards that are so close to each other and who they benefited?
Also a 2nd question. Do both of these models have the zero...
I need a cable like this at Newegg and I cannot find it no matter how I search.
https://www.amazon.com/BLUEXIN-6-Pin-Female-Adapter-0-65ft/dp/B07FNBFFXT
Thanks guys. The RX570 8GB looks like what I need, especially at $140! Too bad the new GTX 1660 dropping in a few weeks will be up at $230. Al though, I am not sure I would need that since I'm gaming at 1080p.
I need a video card in the $150 range. We do not game very much, but when we do, we want something that decent.
Most of the time, the PC is used for office/media work, so it must stay silent then. It would be going into a Dell XPS8900 (i7 6700/8GB) with it's fans replaced with Noctura fans...
It kinds does matter about how good your hardware is. Lets all remember that had 2 things to fix... 1. Hardware specs were low when Xbox One released. They fixed that now with X1X and I am sure won't make that mistake again. It cost them enough. 2. They needed to fix 1st party games and...
Only way to improve load times is an SATA SSD, which I hope makes it in the next Xbox.
https://www.tweaktown.com/news/62347/xbox-scarlet-60fps-minimum-super-fast-load-times/index.html
I need a multiport adapter for a laptop. Main uses are PD charging pass through while using HDMI out to another monitor and USB 3 connectivity.
There are a ton of them out there, but my questions are about PD power delivery for the fastest laptop charging I can get. How do I know what I need...
I've got a Win10 system that was built fresh on a SATA SSD. If I want to switch the OS drive to an NVMe M.2 drive, can I just clone the SATA OS drive to the new drive and everything should be ok and boot to the new NVMe drive? Nothing in the OS needs adjusting afterwards right? SSD trim stuff...
I've always liked the older Metallica stuff, and certainly the older singles that everyone enjoys are really good. However, I think that the black album was the most musically put together Metallica that I enjoy the most.
There was some questionable stuff in between Black and Hardwired...
Well, for the last few Windows 10 builds, the reg fix, plus removing all permissions on those keys except for Admin) has worked. With 1803, those same reg keys are now missing. Does anyone know what they were changed to?
FYI, this is what used to work...
http://www8.hp.com/h20195/V2/GetPDF.aspx/4aa7-0133enw
The sheet says 3 monitors at 1920x1200 resolution is supported. I will try the Ho Rez button, but not sure if that is it. The directions say higher resolutions and refresh rates supported if you can take advantage and have PCIe lanes...
I have the x360 1030 G2 hooked up USB C to the HP Elite USB-C Dock G3. Then I have 3x 1920x1200 E241i monitors hooked, 2 via docks DisplayPorts and 1 via the docks HDMI port with an HDMI to DVI converter. The 2 DP monitors show up fine, but the HDMI one only has a low 640x480 resolution. The...
The range that Tmobile just bought is in the 600MHz range and will take until 2020 to deploy, starting end of this year. 800Mhz is not a part of that deal.
What long distance/wall penetrating they have now is mostly 5Mhz in the 700a range. Works well where they only had 1900 before, but on...
I wanted to pick up a wireless charger for my Galaxy S8. I thought it would be a good idea as a stand for the phone to replace my alarm clock with the always on display for the time, and to have wireless charging.
I was reading about some chargers vs the Samsung wireless stand. The Seneo one...
Just preparing for a new phone next year with Type C and picking out a PCIe type C card. Apparently, there are different types, watt rating and speeds of C cables out there.
It seems like there are no 10gbps cables over 3.3ft. I need a 6ft one. They may do that because the speed rating needs...
If I get an External Western Digital Passport Ultra USB3 drive, I am wondering about certain scenarios.
If the USB 3 drive is hooked to a surface dock, which is hooked to a Windows 10 Surface, will the drive go into sleep mode when not in use (that would be what I want). Or rather - will...
Thanks for the informative post. That was helpful.
So, from what I hear, you are saying that Windows 10 has display specific scaling remembering? I am wondering how this would work. If you right click the desktop and go to Display Settings, and look at the scaling slider (My default is...
Are there any secrets to this issue? For example, when you are undocked, using a Surface screen, the resolution is so high that you need scaling in windows to 200% recommended. Also, Edge and IE need about that percent well.
Then lets say you want to re-dock with your monitors that have...
What I am looking for is a display that is 4k. Right now, I have a 24inch 1080p Acer TN panel I got for a real good price. Yes, it doesn't offer the accuracy of an IPS, but it does great for web surfing, youtube watching and business.
I saw that the Dell P2815Q was $300 over at micosoft...
Thinking of going with an ASUS Z87-A MB and some new RAM for a Haswell chip. I understand there are profiles for memory, but can I select any DIMMs, or do I need DIMM specifically designed for Haswell to use XMP?
If I do need specifically designed Haswell memory for XMP to work, is there a...
I really like the Outlook.com format. I also have a gmail account I use for android and all my contacts. I noticed that you can add your gmail account to Outlook.com and view your contacts. This works great, except, it seems like a one-time sync and doesn't constantly update your changed...
I have 3, 19inch LCDs at work and trying to get 1 wallpaper to strech across all 3.
Example like these:
http://interfacelift.com/wallpaper/downloads/date/3_screens/
I can't make it happen with Windows 7. it just keeps repeasting teh same image on all 3 screens.
Screens are 1280x1024...
http://www.engadget.com/2012/01/09/redesigned-samsung-series-9-laptop-announced/
So, these look great and everything that I want in a new laptop. However, the first series 9had a battery that you could not replace. Will this new series?
What do you do with a $1500 laptop when the...
Wireless speed has always been about half of your actual windows connect speed. But that would mean I am connecting on windows at 450Mbps, and actually using a tool to measure the 217Mbps. That is no the case. I am getting 217Mbps in windows, but that probably equates to well under 100Mbps in...
I am aware of that, this is just the reported connection in windows. I'd like to connect at the fastest I can though. I know the card and router can do 450mbps, but the most I can get is 217. I should at least be able to get 300.
Does the 2.4 and 5GHz band need to be set with the same...
I've got a Linksys 4200v2 with a laptop client that has an Intel 5300 with 3 antenna. I am trying to get to the 300 or 450mbps speeds, but can't seem to do it.
I seem to be able to get 217Mbps on both the 2.4 and 5 GHz bands. Does this seem to be a NON-bonded speed? How do I enable bonded...