Separate names with a comma.
I have the feeling you have the same problem like this guy on your board:...
XstreamHard For the Z390-I you can remove the big I/O cover. For this mod I recommend to use the Black Ridge with Noctua A12x15 fan and VLP Ram....
Van0: Do you have a modded v1 A4-SFX with 5mm Stand-Offs?
Van0: Great result. How much affect has the fan duct on the results? Did you tested pull vs push? Can you confirm that the black ridge isn't matte...
oblongpolygon: I do not change the size of the case so the specifications are the same and also the compatibility. Please refer to the changelog...
I updated www.dan-cases.com with all information about the A4-SFXv4. Furthermore I updated the tutorial section under FAQ with some...
Jandresen: Yes it has 20pin
darxder: The Corsair Dominnator is too tall so you can't fit the tubes of the Asetek 645LT. Furthermore there is no...
Here are some pictures of the A4-SFXv4. The updated web site will be online this week:
DanielOS96 Yes it will come to overclockers in May. On SFFLab they started preorder for v4. They will get the new pictures on weekend so they can...
xpatriatedtexan Should fit.
Started to visualize the new idea in CAD:
Maybe I have a crazy idea. What whould you say if I make everything possible. This means C4 sandwich layout + classic Layout in one case, support...
Some pictures of the A4-SFXv4
I wonder if the complete SFF community moved from HardForum to SFFForum?
It has to fit between the push pin cips. So it can't be aligned with the vent holes :(
Today I got the A4-SFXv4 samples. I will show some pictures tomorrow on day light. I love USB Type-C XD
C4-SFX - Compatibility Survey
with this survey I like get some answers on hardware compatibility, hardware layout and planned...
Hi guys here are all changes for A4-SFX v4
- ADT 185mm PCIe x16 gen 3 riser
- USB 3.0 Typ-C to 20pin intrnal header (90% confirmed)
- changed to...
As you can see it s more than dual slot:
Please read the compatibility section:
What are the temps for GPU and CPU? Please let me also know what test do you use to validate temps.
AlMiDaX No the complexity is the same. Only the back cutout is different and the mb-tray move to the middle of the case.
Maybe some of you know that the A4-SFXv4 will get a new riser cable. This riser cable is very price attractive and in the same price range of two...
Setup "Max Long Power Duration" in UEFI and set it to 95W then your CPU will not boost higher and the temps will be much better. But keep in mind...
They use two layers of ribbon cables (similar to old ide cables). Between the layers and around all layers the use shielding foile. For twin axial...
Li Heat will work too, many cases use these cables, but the attached datasheet is so wrong. A ribbon based cable with only sandwich shielding...
Why do you not contact EKL Alpenfön directly?
This memory is UDIMM ( U=unbuffered ECC) so it should work. Only registered ECC creates problems.
But keep in mind ~5°C only for BlackRidge with 120mm. With 92mm fan the diff is 10-13°C.
SkorpioNElite Yes, I had no influence on the size. The size, heatpipe bend and fin array is very different to my own concept.
CLOUDZZ The Asetek...
z06blaze: Did it not work to shift the fan some mm more into the ram direction? Btw: Mount the fan in that way, that it suck air through the...
I think it is a communication problem. OCUK is part of the Caseking Group and gets the ware from Caseking warehouse.
I can only say it again, i don't know. It is not my product.
Everyone is effected.
The difference is min 4°C but could be also more.
It looks like the new Alpenfön Black Ridge has some manufacturing problems. Some heatpipes are not soldered correctly with the base....
It will not fit because it is more than 2 Slots.
SaperPL: Keep in mind like we have a silicon lottery it is the same for heatsinks (there is a variation for heatsinks and soldering quality). So...
Without a 120mm fan the Black Ridge can't be much better than the C7 or L9i because with a 92mm fan it nearly use the same fin size. Only a 120mm...