Yeah, I tried it before, but there were game-oriented surveys (and VR) and none of them actually send any info - these were stuck with sending information page.
I got my hands on old tablet, alcatel one touch. It got android 4.0.1 (not 4.1) and update to newer version (unofficial) breaks the WiFi.
Is there any possibility to use this via Micro usb?
I tried to get some apps, but most of them are for Android 4.1+
Overall on thermaltake you can easily fit TRIPLE 480 but this is not the best case - acrylic side window, bad dust filters (these pass lot of dust inside), and cable management is hard. Nothing that can't get better with easy and cheap mods.
On lian Li its easier to work, and less to mod it's...
I can say hold on. Its all plastic on exterior. Case just *shoots* when warming up and cooling, even up to 40 minutes after system shut down.
https://www.amazon.com/Thermaltake-Motherboard-Computer-Pre-Installed-CA-1Q6-00M1WN-00/dp/B08451HFPR...
Also about question from private messages - case have no scrathes. Things that can be seen on 4th photo is just imprint. Aluminium, which was used for shell of this case have strange characteristics - if you touch case you wont leave visible fingerprint, but with time it become more visible -...
SOLD
Hello. I got for sell Silverstone Alta F1 case with dual 180mm Silverstone AP183 fans, mounted on bottom. There is no default fans in case (that were loud and one was damaged). I had put silver foil on one side panel, to make hiding cable mess easier - it can be easly taken off with...
Playing on skylake CPU may not be THAT bad, 6800XT is overkill for FHD. That said, there are more benefits from more cores in CPU, and in FHD, CPU may be the bottleneck (there is always bottleneck, no matter what you do, otherwise you would have unlimited number of frames per second) - but if...
Try to find used 5600X (many people will sell, wanting to upgrade to 7000 series), get new Motherboard, RAM can be used (recommending 3600Mhz CL14 - it's really worth it, if you set IF to 1:1:1.
You can sell old parts, but I would just hide them somewhere, with time buy some small GPU with 4GB...
I won't reccomend it. Many says it's fine, it's only allocation memory that shows more than 8GB VRAM, but let's just take facts:
- more new games will utilize UE5 engine and many other RAGE, and other engines, requirements are still going up
- lots of games from consoles will be ported not from...
I can guarantee you won't regret MSI 6800XT unless you want to apply some RGB scheme other than default with some undervolting in mind - MSI Center (soft needed for Mystic Light) is resetting power limit and zero rpm feature in AMD drivers. But thats the only downsides. No coil whine - which is...
For me Corsair, Seasonic, BeQuiet, Thermaltake, SilentiimPC had the issue. Plus I see comments on YT under my video, that a lot of people have same problem and only with XFX CORE variants. I completely lost trust in this company. 3 cards in the row with same problem is too much to be coincidence.
He'll, it's not accurate. Not to mention people who is not taking part in the survey (clicking "cancel"), or simply noting is popping out on their machines, but I found very tricky way of how this works.
Officially this survey pop out random, but I don't believe in miracles, and that survey...
I control fans in BIOS, but have PWM controller powered by SATA, i use it for fan testing, it got knob to control PWM.
But LED control is nightmare for most manufacturers, and people keep saying "you dont like it? Turn it off". If they would know its not that simple.... Having different brand...
Hi .
I wanted to present you my story, but it would take too long - in short, i WAS fan of MSI - in terms of hardware/software - it was least problematic above all Gigabyte and ASUS, till now.
So you decide to choose hardware for your PC? You got whole list of all possible configs - but if you...
I swapped fans again, temps are best ever, but I guess it's mostly because if ati-sag handle, and to be precise - the place it hold the GPU.
Anti-sag handle, hold GPU right in the middle right now. I have noticed, whole heatsink holds on mostly near the GPU die, near the power inputs it's just...
It's been long time, and lot have happen. I had to change case from Silverstone Alta F1, as it almost killed RTX 3080 TUF - there is no sensor over back VRM (closer to video outputs) but noticed compression of thermopad there and RMA did not helped. So I swapped GPU to XFX 6800 XT, but this time...
We all remember what it was, and we should not forget. I personally think, some brands, MSI for example still have some deal with Nvidia. ASUS, too.
Why and I touching this topic?
I was looking for best RX 6800XT, I choosed XFX Merc319 CORE, and that was mistake - I had 3 of bad batch cards...
I sold it. Right now I'm using XFX Speedster MERC 6800XT - cool, quiet, and much better - it gave me 100% pass on 3D Mark stress test (20 loops) - even RTX 3080 at stock settings had 98,6. I even get "Rock Solid" achievement on Steam. Closing thread, won't buy any NV anymore.
EDIT : i waited...
Meanwhile in Poland - gap doesn't exist (by ASUS), they start thread from begin, "if I see something incorrect, I can send rma to shop".
WTF is wrong with this people? Who need such warranty?
I ask you a very simple question - do i look like devastator? Do i like to damage hardware? Answer for both - NO.
When i was setting fan curve i was making one hour test (60 minute) in loops 3D mark with that curve (65%). Then day after, i was using furmark. I had 102 degree on memory, and very...
As I said before, temps was lower for 6 months from buy. I check hardware every 3 months so it's easy to know when it started to produce more heat, and all seems to be termopads/thermal compound stabilizing. But increasing VRM temps can cause to memory get also more heat, as these are nearest...
No i have, and its clearly visible proof.
I cant return it - there is no possibility in PL law that would let me do this, we have 14 days from buy to return.
You think when i open the card, that was tortured one week, and before that was used for 8 months, only one termopad will need to be...
First i dont have any spare thermal pads - i wont buy them as they are expensive - i stated this before.
I also stated in ASUS contact service and letter to shop (and service) thermalpad is incorrect.
Card isnt fixed - it have just increased fan speed. Thats why i complain - its not fixed as...
Opening card, changing anything under heatsink is visible, plus risk of damaging warranty seal. Changing fans is not risky, as I swapped back to original and there is no sign of opening. It's not BS, but was working solution for 4 cards I had and much less risky about warranty.
Who the hell are...
I tried to put noctua fans, I got adapter to PWM fans for this card, but fans won't spin at all. It's S12A 120mm from Noctua. I used these on both Radeons 6800XT. Tried also add some grease to original fans, but these don't have any gap to put grease :(
Looks like only way to deal with it is...
Off course, i got ready profile, where card can be also passive in Cyberpunk (serious). Thats the profile i use till it get sold.
No, termopad on VRM isnt ok, there is gap, which i showed on video, right on begining.
As for taking any side take my words - card wasnt that hot when it was new...
I had GTX 1080 TI Gaming X trio, which was very quiet and cold on 55%, then 6800XT Red Devil which was loud on every available fan speed, then XFX MERC 6800XT which was not aduiable with Noctua fans and even didnt reached 70 degree on core. Thats the point i want to get back and sell this RTX...
Thats exacly why i dont trust reviews now. I tell you what i got, other guy show you this on video, and you are showing just numbers.
PS i just checked with smartphone and it seems to be 31db at 70% fan speed, however 77% is 37-38db.
Its under 20 degree C.
Its nowhere to be quiet, NOT EVEN CLOSE. above 70 % its exacly same loud as hair dryer.
So this is not mine card, but at least second on the world, that makes same sound. No, its not quiet.
Here is mine. As i dont have noise meter and poor mic you can just see numbers...