Search results

Bump

Bump

This has kind of been my experience so far, and 1500% agree, whea errors blow. My benchmark scores have gone up from fine tuning everything ,but I haven't noticed much in game, if anything maybe some more consistency in frames making things feel a bit smoother. PBO negative offset does seem to...

DOCP on my kit is 4000 and it boots fine and seems to run fine, but whea-19s all over. I am working my way through this guide now. Each step I keep seeing improvements, so I probably won't worry about 1T vs 2T.

I am working my way through tightening timings right now, here is where I am at. Congrats on 1T. I couldn't get it to post with 1T so far. Might try some tweaks at the end once I get timings dialed in.

I am putting up for sale my 5800X since I upgraded to the X3D version. Asking $170 shipped to lower 48 states F&F Paypal. This processor ran -15 all core PBO except for one core at -8, and 3800/1900 MCLK/FCLK perfectly stable, no extra SOC voltage needed to achieve FCLK. Was air cooled with...

Well it seems that 1900IF is a hole and everything above that throws whea-19s, so I am going to stick with 3600CL14 with no whea-19s I guess. Timings are pretty tight, so i think I am happy for now. Need to see how low I can go on PBO now.

OK thanks for the feedback. Any good timing guides you recommend? I assume this kit can get pretty tight if I drop it down to 3600mhz.

Ok, i turned PBO off and reran, still getting whea-19s. I've tried dropping frequencies down to 1966/3933, 1933/3866, and 1900/3800. I whea-19 at the first two steps down and can't POST regardless of voltage settings at 1900/3800, guess I have a memory hole there, which sucks. I really don't...

Ok, i increased SOC voltage to 1.1v in bios and disabled GDM mode and changed command rate to 2T and reduce errors. Any other thoughts?

So I recently bought a 5800X3D to replace my 5800X. I have successfully booted into Windows 11 with 2000 MCLK/FCLK, -20 PBO2 CO, but I am getting some whea errors when running Aida64 cache and benchmark which has always been my go to to see those errors quickly. Any Idea on how to fix that? Just...

Any thunderstorms recently where you are at? Sounds like they got fried some how.

Try disabling both ports in bios, reboot into Windows, restart go back into bios and enable one or the other and try to see if that works.

Exactly! Well said, no reason to have voiceover in this instance.

Surprised at the amount of negativity in this thread. I was pleasantly surprised with everything I saw in the trailer. Looks to be a lot of fun, as someone said, looks to be what star citizen originally set out to be but with more RPG elements.

4201 non-beta up. Anyone try? Still on 4006 here.

Middle of June estimated ship date? Come on Dell!

Going custom loop and adding the 3090. Have blocks from Optimus, have had them for a long time actually, just nervous about doing it. It will be my first time with hard loop, but not my first watercooling experience.

So as someone who mainly games on a 5800x I'm kind of gathering that this isn't the greatest upgrade in the world due to the loss of clockspeed? I am currently air cooled but will be going with a custom loop soon. What do you all think? Worth it or just stick with what I got. Will probably not...

Probably answered already but can I get a 5800X3D to replace my 5800X and just drop it in? Maybe need a bios update at most?

Thank goodness. This game struggles on a 3090...

I don't think it discolors, I think it turns clear. I don't have any videos to link, but I remember seeing people "add" the satin finish back by using fine sand paper afterwards on the area that turned clear from the heat

I'm confused, isn't pbo2 negative offsets am undervolt? So if you manually set before to 1.3, then are you overriding the pbo2 settings?

Escape from Tarkov. Very steep learning curve but very satisfying and rewarding shooter that actually requires skill and intelligence to beat other players. The game is pretty to look at as well, I have my 3090 maxed, and it's fantastic. Sound and level design are great as well. And if you're a...

Just bought the game cause it was on sale, but like others, I'll be waiting for the additional DLC. I haven't played through even once, trying to hold off until they get the game closer to the original vision. Hopefully they add things back in to make the city feel more alive like public transit...

I used to have a qcode of AA while in windows. Shows 9E now after upgrading to 3801. No luck getting to 2000 IF still. What's everyone else's experience been on 3801?

They did the same thing for me with the $75 fee to cross ship. Very cool that they offer that. No downtime

I have an OCed 5800X and an OCed 3090 FTW3U that does fine on a TX1000. I would think the 850 would be good. Maybe it's faulty? Did you reach out to seasonic? Their customer service was pretty great. I had an issue with mine buzzing after the pc was shut down and they replaced it.

I have an ultitube, one port is the fill port with a plug and the other I am using as the inlet from the radiator. The inlet at the pump on the bottom i have a drain valve connected to. I could use the fill port and connect it with the universal kit, but it would look much better just connected...

OK that is pretty cool, but what about those of us that are using the multiport tops with an inlet from the top. Kind of SOL it seems like.

PSA: Be careful when you update and try to restore a profile. I updated to 3601 and when I tried to load my profile from 3401 stable onto 3601 i noticed a bunch of really odd values and weird characters in the summary right before I was about to load the profile and reboot. Almost like the...

Still showing 3601 non beta on my end

In the same boat as you brother. Got the FTW3U (updated PCB from evga through the 3090OC) email. Still can't hit 500W though, but not pulling over 80 on pcie anymore so I'm happy. Putting my Optimus block on this weekend. Nervous about it though. Was it a simple install? Going to try KP520 bios...

They hate us cause the ain't us...

New Chipset drivers up https://www.amd.com/en/support/chipsets/amd-socket-am4/x570

I am by no means an expert, but from my experience, pbo2 with negative offset per core on curve optimizer has given me the best results. I have a slight memory oc and my infinity fabric is at 1900mhz. Waiting for asus to drop the next stable bios to try to hit 2000mhz IF. As for drivers...

GPU for sale. lets go!

Throwing my name in the ring. This was standard air cooling. +125 Core, +1100 Memory. Looking forward to water cooling. https://www.3dmark.com/spy/20440755

parts still for sale.

I am putting up for sale my old gaming rig. List of parts below. Heatware is Light1984. I have no original boxes or manuals. I am only selling parts listed. Prices do not include shipping. Payment through PayPal. Corsair White Special Edition 600T with customizations to make a 360 radiator fit...