Search results

STX + MXM should be the new mini :D

the zotac mini fits but the AERO might not though, it's taller than standard it'd be sad to cut the aluminium panel, I would not do that :D

GPU temp is bad I gotta say, and make sure you get the standard height card, the FE is the best option, blower cards doesn't seem to be affected much, but AIB cards are though my 1060 got to 83C gaming with 7x% fan speed outside the case it's 5-7C lower I got access to a laser cutter machine, I...

take a look at Sunmilo cases, they're pretty awesome

what was the conversation like?

I don't expect much from a 30$ case :D

Just my humble gaming machine happens because I found this case for a good price, the Primo P115 Specs: 4690k @ 4.5ghz + CM Seidon 120V H97I-PLUS 8GB 1600 C7 Galax/KFA2 GTX1060 3GB OC krpw-sx400w/90+ Crucial MX200 + WD 1TB The original plan was to fit my 290 and an ATX psu in there but it...

what? why? doesn't the L9i performs better than C7

you should paint the panels to make it look less cheap and plasticky

Hutzy XS with a handle :D

the reason is always sale there's little to no market in super SFF, that's why we should be grateful ITX thrives strongly lately and they even gave us ITX 1060/1070 the amount of ppl who wants to build super small beasts is insignificant in their eyes, our only choice is to wait couple years...

I bought the Delta Flex 250 with my setup it's very quiet on idle all games runs fine, no hiccup, no fps drops, PSU isn't too hot, GPU fan is louder than PSU fan (that's a surprise). GPU powertarget is only 80 of course, can do 100-110 but I don't want to strain the PSU too much but oh god the...

I just did some research and I think it'll be sufficient, given that the HDplex with 16A 12V rail can support a GTX970 //oh and one important question: the noise of the flex is it tolerable? or r9 290 hair dryer level of noise? and is it noisy at idle or webbing?

will a delta flex 250w with 17A 12V rail enough for a 1231v3 undervolted and a GTX670 DCUII mini undervolted? + 16GB ram, 1 SSD and 1 HDD here is the product Hahutzy sorry to ask but can you provide the skp file? I plan to build my custom project based on the Hutzy, for personal use of course

Jonsbo v3, and that is even with the 120mm PSU fan as an exhaust, 1 60mm fan intake under the GPU and one 60mm exhaust on the side my GTX670 puts out quite a bit of heat :D

he's right about this part, mobo and drive temps skyrockets when there isn't some way to exhaust the hot air, and after some time GPU and CPU will get hot too, my ssd will have to run at over 55oC when gaming in my 10L cube and I can't do anything about it

the RX460 is probably a weak piece of shit, around 750ti-950 performance, so dont get your hopes up

I seriously doubt that the 220w flex is gonna be enough for that system /nvm its a 300w :D

damn sexy

C7 is wayyyyyyyyyy sexier ;)

I'm so want this case but there're so many thing came with it I'm currently using ATX PSU and 22cm card In my country there's no place that sells SFX PSUs and ITX card like 270x ITX, 285 ITX or even GTX970 ITX :(

You'll wanna take off that fan grill, because it will make much noise when the fan ramps up

I'm planning to build a rig like this but with some different hardwares: Still a 750Ti, 1 SSD, 1 2.5" HDD but with the ASUS H97I-PLUS and I5 4460 @ 0.91v The case come with 120W DC/DC board and 12V-5A AC adapter I did some calculation on here, and it takes about 155W for the system (97W...

I always thought 230$ for a case is too much for me but damn I might be ordering this because this is the most amazing and space efficient case I've ever seen :)

Anyway to buy one of these? I'm from Vietnam

@dondan: what is the price and when will it be selling?

As seen from the pics, there's very little space btw the end of the second slot and the side panel, so it might not support 2.5 slots card