Not sure if this is the right section for this but, I cannot get AURA Sync to control things. Standard aura sync will not install properly and the aura creator through the armoury crate does not seem to work properly either. HELP!
Hey guys,
ok so I have tightened the block as much as possible. The temps seem shit. I have hwmonitor running and the minmax is the following and Im just on desktop no games streaming some youtube, min is 30c max is 67c.
The rad is in the top of the case with 2 x 120 mm fans blowing through...
Hey guys,
my rig is in sig, I was just chilling with chrome open watching a youtube video and my pc shut off. When I restarted it, it fired right up but a bios message said that a cpu over heat threshold triggered the shutdown.
With the watercooling I never get above 70c(idle is between...
Hey guys,
I have spent a tidy sum getting my rig up to speed lately. But, I find that the sticker on my Barracuda nvme drive is spoiling the show.
Now I realise that I can remove the sticker but, has anyone here thought to dress it up with a cool head spreader or something?
If so please add...
Hey guys,
I recently completed my rgb setup but unfortunately they came with poorly placed stickers in the middle of the fan which has resulted in a wobbly look on 3 of them.
I tried to use a sharpie on it while its spinning but that made almost no difference. I am pretty sure I am not the...
Hey guys new to this. Can I plug and rgb fan into a 4 pin plug on the motherboard for a power source but, then plug the controller into the proper controller hub?
ok so I ran it in the dishwasher on Tuesday. I used my compressor and blew it out until no water could come out or drip. I have left in the on my back deck for 3 days counting today, in the sun. Do you guys think its ready to plug in?
Hey guys,
like many of you I have spilled a beer on my Logitech G610 mechanical keyboard. I took all of the kep caps off and tried to clean them as best I can but several are still quite sticky.
I found Linus's video on cleaning it in the dishwasher. have any of you tried this? If so how did...
Hey guys,
I hope you are staying safe during this crisis!
Anyway I was just wondering if there is any software for this cpu cooler I am using? I looked on the website and I can't find anything but it doesn't seem complete.
Do these types of coolers just run at one speed? How do i control...
Hi Guys I am speccing out a gaming system for my buddy and was wondering what your thoughts are. The CPU will be a Ryzen 5 3600 with 16 gigs of 3200mhz ram.
Here in Canada the 2070 super is about $679 and there is an evga 5700 xt THICC for $519. I know there were some driver issues around...
Sorry if this not where this should go. I bought an Asrock board for my daughters pc and it cam ewith a $30 mir. just got around to reading the mir form and it says they needed to receive the mir within 10 days of the invoice date.
Is this common? Seems almost impossible to get the rebate...
Thanks for the reply guys! I cant seem to find the specced voltage for this cpu? 2600x. Its not on the box or in any of the literature that came with it. I checked the AMD site and it shows everything but.
Hey guys I purchased a bnib Asus ROG GX950 a few months ago and finally started using it. Love the feel but, one problem I cannot find any software to control dpi & sensitivity etc. The Asus website have not released software since 2012.
I have tried the asus armoury suite but it doesnt...
Hey guys,
first post in forever! I just upgraded to a 3600 for my main rig and put a 2600X in my daughters machine. I installed a hyper 212 evo on it and it seems to idel @ 31-33c and routinely spikes to 42c+. Does this sound normal?
What are good gaming temps for this setup? She plays...
thanks for the reply pendragon1. Well he has a logitech G430 headset but out of the blue he started getting a lot of static with the usb soundcard part. No static with just plugging in the 3.5mm jacks. I am actually just submitting a warranty claim. Failing that I will probably just buy him...
Hi Guys,
its been a while but, i need some help. I recently gave my son my old Gigabyte Z77X-UD3H motherboard in a gaming rig. The onboard audio was working fine when I used it but I cannot find a working copy of the VIA HD Deck anywhere. The one that most internet search direct me to do...
Hi guys, well after a trip to my local shop this morning it was discovered that I got a bad ram stick in the kit. The bios version was also very old and has now be updated. So, I bought a single 8gig stick that worked at the shop and now have to go through the newegg rma process for the 2nd...
ok i cleared the cmos and found that I had the cpu fan plugged in wrong(now correct) But,the problem persists. I guess I will remove 1 stick of ram now.
whatslotsshould install the ram in?
Is there anyway to know what bios version is installed on it?
Hi guys I just assembled tmy new build and i will not post. Here is the build:
intel i5 7600k
gigabyte z270 gaming k3
Gskill
I get 5 long beeps when it tries to post, but I checked the error codes and there isnt one for that number/type of beeps.
Please help.
TIA!
Thanks for the reply guys. My build is 5 yrs old and the socket is eol. I am definitely upgrading soon so I can sell my cpu, mobo and ram while they still have some value. The machine works, so this is more of a longevity move than a performance upgrade. As for the ram suggestion I only use...
Hi Guys,
well it has been sometime since I upgraded my system(the intel rig in sig) I am looking to upgrade the mobo, cpu and ram.
Here is what I was thinking. I do plan on overclocking.
cpu: Intel Core i5-7600K
mobo: GIGABYTE GA-Z270-Gaming K3
ram: HyperX FURY 8GB (2 x 4GB) 288-Pin DDR4...
Hey guys, its been a while for me but I need your help. I am trying to install the Ai Suite to over clock the cpu in my back up rig below, since I updated to win 10. The Asus website does not have anything to download.
Do any of you know if I can use another version of this so I can oc the cpu?