He is using additional fans for the GPU and of course https://noctua.at/de/na-fd1
And any kind of fan duct improves temperatures way to much.
But this bracket is another thing that should be available on purchase...
Your problem seems to be the hot air that gets recycled inside the case. A costum fan duct with weatherstripping like Ej24 suggested should be the easiest solution.
Or is there enough space between the heatsink and case to fit two 92*14mm slim fans? with their orientation changed to pull...
My build just got the last touch in form of noctua chromax fans. Black is beatiful ^^.
Some info of the system:
Gigabyte Aurous Z390
Gigabyte Aurous RTX 2080Ti Turbo
Corsair 750 SFX
Corsair DDR4 32G
Samsung 970 Pro 1TB
Samsung 860 Pro 4TB
Cryorig C7 G
Noctua NF-A9x14 HS...
What about this Cryorig C7G ... Graphene. According to this shops leaked info, it will go up to 125W with unquestionable compability.
We need some reviews I guess. But nonetheless, the Noctua cooler seems to...
Did Alpenföhn change the design so much? I thought the original design had compability included as a factor.
Has someone started a google spreadsheet for compabilty issues?
I'm currently doing fine with my A4 and one of the Asetek coolers, but the Black Ridge would help in getting rid of the...
You just have to get rid of the stock fans of the Accelero III and mount two 120mm fans at the bottom. It will fit with about 2-3mm space left. The same applies for the Accelero II.
Of course the lenght of the cooler could be a problem. I only had an Accelero II installed that way, but on the...
Almost cannot wait for the finished product. But I have a question regarding CPU-Cooling. According to your website the Sentry will support coolers up to 47mm (Intel Stock cooler).
What is the absolute maximum cooler height? I mean the height so the cooler barely touches the cover.
Just startet Prime95 again. After 10 minutes i get these temps. 4Ghz on all cores with the fan at 9V. As you can see the core difference is up to 12°. I guess the temps will drop 3°-5° with the fan at 12V but I won`t test that, as I would have to open the case and remove the adapter.
As far as I...
CPU - Intel Core i5 4690K
Board - Asus Z97I-Plus
RAM: G.Skill (Removed the heatspreader)
GPU - Asus GTX 1060 Turbo
Board, CPU and RAM will be changed in the next weeks. Got the fever again after receiving the A4 ^^.
The fan is actually a PSU fan from Corsair or a good imitation I...
I didn't mod the backside cooler, but it's a very close fit. The RAM modules align
with the cooler's mounting holes and behind the cooler there's just enough room
for the USB 3.0 cable.
I removed the original fan from the SFX power supply and mounted a 80mm fan on the outside.
Does the Arctic Freezer 13 fit into the M1? I'm just worried because according to arctics product page, the cooler has a height of 130mm. The exact maximum for the M1. Can I still install the side bracket with such a cooler?
The fans are constantly running, but I modded the Bios to control the fan speed.
The fans are fastened with screws. Sadly almost all GTX970 cards have coil whine and mine is no exception. I didn't want to send back 10 cards to get one that is merely quieter than the first one.
The PCB has the...
I use the GPU Fan header and a Y-Splitter for the bottom fans. I Also switched the PSU Fan und control it
trough the CPU Fan header. All Fans are Noiseblocker 120mm BlackSilent Pro PWM fans.
So the motherboard controls the Cpu fan and the corsair H55 pump and the GTX970 controls the bottom fans...
- One can mount the Twin Turbo in two of the three "slots" (Different holes in the mounting plate) and it still fits into the M1 (Tested with GTX670 & GTX970 only). Of course you should choose the holes that
install the cooler closer to the motherboard try side
- I have a GTX970...