Search results

  1. E

    P9X79 LE USB 3.0 Not working

    I verified that my driver is the latest off of the Asus website. I'm not sure how to check the firmware of the external drive nor how to update it? Also, if I'm not even getting the LED on when using a USB 2.0 drive in the USB 3.0 port with legacy enabled, isn't that indicative of the mobo not...
  2. E

    P9X79 LE USB 3.0 Not working

    I've got an issue with both my front and back USB3.0 ports (front panel USB plugged into header). I can't use any of the ports with my USB 3.0 External Drive (WD passport) although the white active LED is on. Windows never recognizes that it is connected. I can connect to it through any of the...
  3. E

    Salmosa Middle-Click

    At first I thought my old Salmosa's middle-click was just broken, but then I discovered that their software just deactivates it. I know that the click is registering because I can set the middle mouse click to a left click, and it works perfectly. However, I can't get it to be utilized as a...
  4. E

    GTX680 Extreme Heat

    Yup, the corrosion was black-ish. That's probably what it was, I just figured since I was in there already I might as well cover all the bases. Looking forward to some gaming after I finish bleeding all the air out!
  5. E

    GTX680 Extreme Heat

    Whew.. temps are so much better now. I think there was a lot of restriction in the block due to a build of of particles and some type of cardboard in it haha. This block is brand new, been running for ~ 1week :/ There was also some corrosion in it (surprised to see that already too), cleaned...
  6. E

    GTX680 Extreme Heat

    Ok, looks like I am going to have to take it apart this weekend. Anyway I tilt, there is no telltale rush of bubbles. I think either there is something going on with the block's internal channels or its contact because the flow of the loop in general seems ok (rush of water into reservoir, good...
  7. E

    GTX680 Extreme Heat

    Res-> Pump -> Rad -> GPU -> CPU -> Res I flipped it upside down and all over the place to try to dislodge any stray bubbles that hadn't been bled out. The water level in the reservoir did go down a little, suggesting something got knocked loose. This causes the coolant to foam up though (force...
  8. E

    GTX680 Extreme Heat

    Double-checked instructions. No specific inlet/outlet. Will have to wait to check mounting of GPU block, but will do that as well.
  9. E

    GTX680 Extreme Heat

    CPU 34-35 C idle, 50-56 C load (Prime95 blend) GPU starts like 40 C idle then rapidly rises to 99+ through Furmark Flow seems to be ok, not just a trickle.
  10. E

    WC'd GTX680 Extreme Heat

    Hi guys, I got my first watercooled loop up recently, and I thought everything was going fine, until I tried to play a game. The game has some bugs, so it might not be this, but the game was crashing my system after playing for only a very short time. I decided to download FurMark and GPU-Z...
  11. E

    GTX680 Extreme Heat

    I can feel the GPU block getting very hot under load- so something is transferring a lot of heat- it seems like it's just not getting wicked away fast enough. Will still try to re-mount the block though, thanks.
  12. E

    GTX680 Extreme Heat

    Hi guys, I got my first watercooled loop up recently, and I thought everything was going fine, until I tried to play a game. The game has some bugs, so it might not be this, but the game was crashing my system after playing for only a very short time. I decided to download FurMark and GPU-Z...
  13. E

    FS: JVC GZHM960 Camcorder, Xbox360 Elite 120gb with Crysis 2

    I can vouch for this member, he is my brother. Bump!
  14. E

    FS: XBOX 360 Bundle + HD PVR + AX720 Headset

    Total package includes: - Xbox360 120gb w/ all of the original cords + Ethernet, Hdmi, & separately purchased RocketFish Component Cable - 1 Xbox360 wireless controller w/ rechargeable play-and-charge battery pack - Games: CoD2, CoD MW, CoD WaW, CoD MW2, Crysis 2, Halo Reach BLACK OPS...
  15. E

    Vaio FW not working

    Haha no I explained it incorrectly, I mean I can't hardboot it be holding down the power button. The button can be depressed. The only way I can get it to turn off, and I mean that in the loosest sense because only the green power light is on, is to remove the battery.
  16. E

    Vaio FW not working

    Hey guys, I've got a problem you might be able to help me with: I picked up my laptop while it was running, and then the screen turned black and the fans stopped spinning. The power led button still glowed green however. I could not depress the button to turn it off, so I pulled the battery...
  17. E

    Lian Li V1020 Case Mod(No name yet)

    Nice work so far! What's "small circuit etching"? Is it like PCB etching?
  18. E

    23" Widescreen LCD Monitor 2333T $149.99 @ Microcenter

    I think this is a fairly old monitor, and I've heard that the input lag is horrendous, although the picture quality is stunning. Was interested in acquiring one recently.
  19. E

    XFX Radeon HD 6990 Drawing!

    I like XFX's warranty model for sure, and the 6990's raw power!
  20. E

    TJ07 screw threading?

    Hey, I was wondering if anyone could tell me what threading the motherboard standoffs in the TJ07 accept? Also, what type of screws for PSU mounting? I need to buy some. Thanks!
  21. E

    3 Enermax SpineRex Chassis Up for Grabs

    Cable management, Dust filters, and capacity for 140mm fans vs 120mm are my fav features
  22. E

    Cable Management for TJ07

    I'm wondering the same thing, trying to figure this out for my new build. I've seen many route 8 pin and 24 pin behind the mobo and cut holes for cable management. PCI cables I've seen are usually just stuck up through the holes in the mid plate. Don't know about the rest. I read something that...
  23. E

    WTB- TJ07 BW

    pm'd. Bump!
Top