Search results

there is no such options. right now I installed Wheezy + Xen, made the video passtrough but after installing the nvidia drivers on the Windows Guest, the video card has a yellow triangle in the manager stating error code 43.

Hey guys, I recently purchase a video card for my Dell C1100. I am currently running of Ubuntu 14.04.1. I spent 2 days trying to figure out how to get the video card to work. I had to 'update-pciids' to get my video recognizard properly for 'lspci' i installed the nvidia drivers from Nvidia...

@staticlag th for the info, i will try it again and give you some feedback

i ran into the same problem. Running sas2flash gets me this error. No LSI SAS adapters found! Limited Command Set Available! Finished Processing Commands Successfully. Exiting SAS2Flash. Please note i did not execute: megarec -writesbr 0 sbrempty.bin megarec -cleanflash...

i managed to connect via ipmi. Post snooping : 2b ipmi and bios firmware were/are both up to date.

Hello I just purchase some new hardware. supermicro x10slm intel e3-1220 3.1ghz corsair vengeance ddr3 1600 When I boot the whole thing. I says "IPMI initialization" and after a few seconds it hangs to "System initialization 15". I checked many forums,manual,etc. no one seemed to...

I only picked that board since it had 8 sata and supports the new haswell socket. How about: Xeon E3-1220V3 Haswell 3.1GHz SUPERMICRO MBD-X10SLM-F-O and 2x4gb ram drr3 ecc from a place I can find it cheap. I don't know about ECC RAM price, how much should I pay for the above? and of course...

I find ECC RAM expensive, unless i am not looking at the right place. If I get M1015, i would need to change my actual cables. I am not sure of the benifit from going xeon/ecc since this is used only to storage, I have another rack for VMs and stuff. Thanks for your inputs :)

Hello guys, I wanted to get an expansion for my current norco 4220, but I decided to upgrade the hardware instead. What doesn't change : Norco 4220 3ware CBL-SFF8087OCR-06M 0.6m Multi-lane Internal SFF-8087 Serial ATA Reverse Breakout Cable PSU: 850w corsair New hardware : CORSAIR...

well, I don't need the RAID function actually. It is going to be a software RAID with mdadm. I have yet decide which I am going to take.

oh, i just wanted to point out 2 model I found that supports it.

SATA III Highpoint-Tech-ROCKET640L-Pcie-2-0-Host-Adapter SATA II HighPoint-RocketRAID-2300-4-Port-SATA-PCI-Express-RAID-Controller-RR2300

Do you have any bookmarked article about such device (delay/timer) power switch?

th @westock2000, I will check for articles about that over the internet. i have a norco 4020 atm with 14 drives and I don't have such delay/timer device. It boots just fine. The HBA/RAID card actually scan the bus before the OS boots to see the drives. I could also add...

I listed the 4570S but it was not because of the watts, I will go with the haswell i5, but I don't know which yet. 32gb ram seems overkill, it will run debian. Can you tell me why I would benefit from 32gb ram? for the power supply i guess i will go for Corsair-Enthusiast-Series-Modular-TX850M

Hello guys, I am going to get myself a BackBlaze storage pod 3.0. With 45 drives in it, I was asking myself what kind of power supply I am going to need. After some reserach, I found those 1200watts with the c6/c7 idle mode for 4th gen intel cpu. see...

@staticlag so I need 6x of these in the expension rack straight to the main rack?

The current rack is a 4020, sorry about the mistake. It already has 20 drives. My plan is to add another rack with 24 bay. I didn't about SAS, I am not sure why. Is there a similar card I could use in the expansion rack that doesn't require power from the pci express?

Hello guys, I am going to upgrade the hardware from my norco 4020 rack and I wanted to check if there is anyway if I could plug another 20/24 drives to the rack. For the "main" part of the rack i need 20 sata ports : 4 x h4 xport multiplier 6 on mobo Total : 22ports. Here comes the fun part...

I recently broke my Supermicro X7SBE I need a board which will be LGA775 since i got Xeon 3000 serie and 2 PCI-X slot for my AOC-SAT2-MV8. 250$ is expensive for the board, i wanna look for an alternative with another board, i looked into it and didnt find anything better yet. i dont...

there we go, thank you :)

Sup guyz, im going on the next phase for my media storage, i remember that i saw in the pass that 4U-5U with some 25+ HDD room in it, it was RED could you guys help me find it

I guess i will get a frame/skeleton cabinet, then i will make wooden or very light metal panel for it. That way i can customize it and put flames on every sides ! Just kidding, but it is still the most reliable solution

Hello guys, I am looking for a server rack for my Norco 4220(btw i need to post my build 14TB, 7slots out of 20 taken) and im looking for a cheap solution here. Im looking around 24U and it can be open frame, then i will make panel from somone without any problem. If you guys got any...

i was goig raid0 for performance, but it seems not to be a good idea, i will try to stick with WHS, but i will just put the share option on the drives from My Computer What about Freenas

Ben, im sorry but your last post is just chinese to me:confused: Wil32

aight, i got 2x500gb and 2x1tb, i will soon puchase 4x2tb: raid0 them. transfer all data from the 2x500 and the 2x1tb to them. make a raid0 with the 2x500 and raid0 the 2x1tb, ultimatly i wanna get 20x2tb, My goal with that server is to have a Data server, i dont need to have files oragnize...

Would you guys suggest me any other OS then??

Is there anyway to add a drive the WHS without formatting it(storage pool)

I got a setup just like Andromeda, i just got a 850w PSU and a supermicro X7SBE(only diff with him). It seems that i cant get the pci card to work. while booting, i can see them on the screen since my motherbaord scan the pci channels. They light up during the boot also. But once totaly booted...

i know that, it help add more hard drive to the system. sounds like i will stick with the build posted in my first post i just saw that the mobo has 4 pci-x slot, is there anyway to get a 20hdd enclosure with that, so the enclosure would have a PSU, CASE and HDD.

oh those cables, yeah didnt know it was SAT2 or whatever. Still i dont nkow if I should take supermicro mobo and raid card or desktop mobo with 3wire/chebron

I dont get the SAT2 part. The Norco 4220 is already purchased. I have build like this using desktop mobo and 3wire/chenbro combo. Should i go with that?? About thr airflow, i might buy better fans likr seen in other threads about this issue in this forum.

aight WHS wins. What bout the specs???, is there anyway toget an enclosure and get cheaper parts that will do the same job??

I just bought a norco 4220 case and I would like to have some lead about the spec i should get. I have already a build in my head but i would like other ppl opinions about it. The build consist into a main system with 20 HDD no extension. Norco 4220 2x Supermicro AOC-SAT2-MV8 8 Port SATA...