Search results

  1. K

    Betong - Array R2 mod

    Can imagine that it is right, all I can hear now is a low noise from the PSU at the top of the case. Finaly done with this project :) Assemble all the parts. Right now i have one 3GB drive plus two 1GB drives. Allso puting up some final pictures in hi-res at...
  2. K

    Betong - Array R2 mod

    Thnaks :)
  3. K

    Betong - Array R2 mod

    All done with the case. Tomorrow it's time to take it home and install some hardware and get it running :D
  4. K

    Betong - Array R2 mod

    “Finally” back to work after my vacation. :( Well my concrete plates have cured during the past weeks and I took them out of the molds and glued them to my panels. Also made a purchase of a SSD that i will use as my system drive. For the first time i did a testrun of my...
  5. K

    Betong - Array R2 mod

    How to hide the eject button on the DVD :) #1 - One piece of thin wood stripe. #2 - A groove in the front to fit the thin stripe. #3 - A large hole in the front, you never know where the eject button is on other devices if you decide to switch it later on. #4 - A extension on...
  6. K

    Betong - Array R2 mod

    Thanks for the feedback :) My concrete panels have cured during the night. They have a more grainy texture now. Worked some more on the DVD front and fitted the power button at the back of the case. (Case is upside-down)
  7. K

    My showcase/presentation

    Why not :D Its not to big and its only thin concrete panels (around 10mm / ½ inch). And it's a HTPC/NAS, noting I'm going to move around a lot :)
  8. K

    My showcase/presentation

    Thank you :) It's fun when someone see it's a European/Scandinavian style to the builds. When designing and working on my project I never think of it. Also put up my first worklog here on HardForum of my latest project. http://hardforum.com/showthread.php?p=1038922432&posted=1#post1038922432
  9. K

    Betong - Array R2 mod

    Time to start working on the panels. Will cast thin slabs of concrete and then attacht hem to the panels. Started do the molds in shuttering plywood. Actual the plywood don't look to bad as panels :) Began to cast panels today. Right now it looks really shiny and smooth, but when...
  10. K

    Betong - Array R2 mod

    Continued working back the front and back frame. Did some notches for the ribs infront of the air intake. Glued the front and back frame in place and made the bottom part of the frame. The back panel will be removable so I can hide cables behind it. Started to work on the top...
  11. K

    Betong - Array R2 mod

    Started to cut up some raw materials and planed and milled it. Always fun to make the first cut (or drill holes) in a new case :) Time to attach some brackets to the chassis. Using a piece of bench top to get the first bracket in the right place. Using a strong...
  12. K

    Betong - Array R2 mod

    My first worklog here on HardForum. Done some scratch builds and mods before but only posted my work in Sweden. Did a presentation of my earlier work here Betong (Swedish for Concrete) This build will be based on a Array R2 case that Fractal Design was nice to sponsor me with. The...
  13. K

    My showcase/presentation

    Lets trade a custom case for a life in sunny california, so tired of "all-summer-is-raining-away-sweden" :D
  14. K

    My showcase/presentation

    wow, thanks :)
  15. K

    My showcase/presentation

    Hi HardForum A short showcase/presentation. Has for some time been working on modding and scratch builds. Before I've mostly been using a large Swedish site (sweclockers.com) to upload my project. The fact that I work as a carpenter my specialty is wood cases. Mostly doing clean design...
Top