Search results

What's the LED above your power button? Is it stock? I have the silver case, no LED. Also: the silver button seems to be different. Yours looks very nice as well.

I've ordered two - will be delivered in two weeks (I live in Singapore)

That sucks :-(

http://noctua.at/en/products/fan/nf-a9-pwm

So they ran out of filters - could one of you please measure the dimensions of the perforated sections on the side panels? height and width? From simply putting my ruler to the screen, it seems the holes in the side panels are 121mm tall by 252mm wide - can someone confirm this? I'll have to...

Your basket is a cookie on your local machine, it does not reflect their inventory allocation. Congratulations on the silver, you'll have to wait till the next batch if you want black

:-( Sooo much lag - I managed to put everything in my basket, and then Amazon checkout failed me. Ended up calling them, and got a silver one where I really wanted black. Any thoughts on the challenges of painting it? the rest of my setup is black.

Lag

Thank you for bringing this to my attention!

That's the problem - I don't know why the right-side internal filter is so much smaller than the left-side. I can clean my CPU and GPU fans and radiators whenever, I can't clean out the PSU - thus, the PSU is the one I would like to protect. For the external filters, both of them are the same...

No filters included with the case. I haven't found any pictures of the filters mounted to the case. The filters can be seen on Overclockers.co.uk

I've read through the thread again - I'm still not sure why the right side internal DEMCiflex filter is not the same size as the left side filter. The hole grids in the two panels are the same size, no? I'm wondering: Will the CPU or PSU be unfiltered? and Why?

48 hours to go!

PM sent

When you look at the set they offer, for mounting within the case, right-side is square and left side is rectangular. However, in the set for external mounting both sides are rectangular. This leads me to believe it has something to do with internal clearances, but I'm not certain. I don't...

Does anyone know why the right-side internal DEMCiflex filter offered by Overclockers.co.uk is square rather than rectangular? Is the CPU or PSU left unfiltered? Howcome?

I'm going for something similar - I think it's cool - but I understand if not everyone does. Would you be able to measure the clearance from the top of your CPU cooler to the inside of the case?

Hi Kreyyr and babadook - can you advise: What kind of mounting hardware comes with the case? Does the case include motherboard standoffs? I've bought my SSDs and don't seem to have the screws to mount them with.

I'm looking forward to it :-) The price to use vPost - a freight forwarder with a location in the UK - will be additional EUR 26.25. This goes on top of the shipping cost from Overclockers.co.uk to the vPost location. The hand off will also add latency to the shipping process. I'd much prefer...

Yeah, that may be the way to go, unfortunately. I also just spoke with Caseking.de - they don't ship to Singapore either :-( oh well...

Hi dondan, I just got off the phone with a nice guy at Overclockers.co.uk - he advised me that they were not able to ship your case to Singapore where I live. He mentioned that Overclockers.co.uk are owned be Caseking.de. He suggested I reach out to you for advice on how to acquire the A4-SFX...

The ASUS ZenScreen MB16AC portable monitor has a hybrid USB connector - It supports connecting to both USB type A and USB type C on the motherboard. It was announced last fall, but is not available for purchase yet :-(

I'm using Corsair LPX RAM in an Asus z170i board - it fits well, and is lower than my NF-L9i + NF-A9 PWM heatsink.

1920x1080, power and signal over USB: https://www.asus.com/Monitors/MB169C-plus/overview/

dondan: We will get an email 7 days in advance, before the case will be available for purchase on overclockers.co.uk and caseking.de - if possible, could please ensure this email includes the specific time of day the cases will be released? I don't live in an EU timezone, I'd hate to miss the...

Two Questions regarding the DEMCiFlex filters: 1) What are the dimensions of the "windows" in the side panels of the A4sfx? I'm not finding the case among the standard cases on DEMCiFlex homepage (CaseKing.de doesn't ship outside Europe) 2) Why would CaseKing.de make the internal filter for the...

I'm not sure that's completely accurate, maybe I'm missing something? It seems that for the Be Quiet SILENT WINGS 2 | 92mm PWM (link) the Air pressure is 1.98 (mm H2O), this while the Noctua NF-A9 PWM fan (link) has Static Pressure of 2,28 mm H₂O. I would agree that the listed sound volume is...

I'm looking to buy air filters for each of the side intake panels. What are the measurements of the two meshed areas? I'm assuming I won't need filters for the bottom or top vents, as the air will be expelled through there? Does this seem like a reasonable assumption?

For those in Singapore looking to pool orders and thus save on shipping, please PM me so we can work it out when ordering from overclockers.co.uk

http://www.anandtech.com/show/10947/zotac-announces-geforce-gtx-1080-for-miniitx-pcs

Really excited to be here! I signed up here, just to be able to buy the case as soon as it is offered for sale. I've been checking caseking.de and overclockers.co.uk every day to see when it drops. I've already bought all the components I'll be embedding in the machine (starting from scratch)...