I dont know if this applies to your situation, but back when I had a 1700 on a B350, I had all kinds of weird USB issues.
I found that increasing the Soc voltage 0.05V (or perhaps it was 0.1V) via offset, removed the problems.
The 3900x is a completely different CPU, so I don't know if it will...
Its hard to say where exactly the improvements will come from.
Zen 3 is supposed to be an even more from the grounds up rebuild of the architecture than Zen 2.
Zen 2 was their first chiplet design. There must be some low hanging fruit they have discovered, that can improve performance / IPC...
I have been experimenting a little with this since I read the post on HWiNFO's forum.
On my system with my current settings, where I run with a -0,1V offset to the core voltage, HWiNFO64 reports a Power Report Deviation (PRD) of about 75%. Which seems rather bad (lower percentage is supposed to...
You cant trust HWinfo 64 completely, as it cant detect cores that are put to sleep.
See this comparison of Ryzen Master vs HWinfo64 on my almost completely idle 3900X. HWinfo shows much higher clocks. HWinfo does not know the core has been powered down, so it'l show the last active clock.
On my system it suggested slightly tighter timings, and different values for ProcODT and the CAD_BUS Block ohms.
Some of the Voltage Block settings, were also changed (raised) a little.
For me it enabled up to 3666 to work. Before I could get to 3466 max.
I upgraded from a 1700 to a 3900x 3 weeks ago.
And even though my motherboard is not a top model, it has been completely painless. It restarted a few times on the first boot, before starting Windows, and since then it has just worked.
I installed all the newest drivers after installing the new...
My FX 8150 on an ASUS Sabertooth 990FX is still in service, but these days as a NAS server with Plex and Logitech Media Server duties.
When I replace my Ryzen 1700 setup, it will take the 8150's place, and then the 8150 will probably be put to rest.
I really liked Rage too, and finished the game (and have played it a few times since release). I didn't understand its bad reputation.
I will probably get this new version, just to see if I enjoy it as much.
Its a nice article.
And I'm quite certain the Windows kernel is weel thought through, robust, and reasonably well optimized.
Something the developers could and should be proud off.
Its a shame its let down so much by the rest of the OS. Especially Windows update has become a nuisance. In the...
Well if thats the facts, I consider myself lucky getting to 3400 (3393 because base clock is 99.8 instead of 100).
I'm actually quite happy with the system as it is right now.
In the future I'll probably buy the 2700x, if I cant wait until the next revision of Ryzen comes out.
I actually like...
Mine is of course only a 3200 kit.
I have tried setting Procodt to 60, and 1.475V @3466.
It does seem to have helped, but I'll have to run for some time, to see if its reliable / stable.
Nope, didn't work, still get memory errors / crashes after a few minutes.
3400 seems to be where...
Following your post I tried setting mine to 3466 / 1.45, with the 3200 DOCP setting. The computer boots, and I can work on it for a few minutes, RAM test 126.96.36.199, never gives errors. But eventually the PC freezes up.
Turning speed down to 3400 makes the PC stable, so still higher than what I...
I ended up killing my old motherboard (water leak)
So instead of buying a new processor, I ended up with an "ASUS TUF B450-plus gaming". Had to cancel the order for the processor, as I cant afford both right now.
Basically this is the updated version of my old board, and I chose the full ATX...
I am aware of it, and thats also why I mentioned the BIOS versions. My point was that the Ryzen compability sticker doesn't guarantee compability, not even in brand name boards.
Downgrading is a pain, as the BIOS does not support going to older versions, so you have to use special software for...
I have The G-skill Flare x 3200 16GB in my ASUS TUF B3550M-plus gaming.
My experiences have been a little mixed.
Up until and including BIOS 3401, it was just a question of setting the XMP profile, and everything would be good at 3200.
With any of the later BIOS'es, I have not been able to...
I don't know if it also exists in the english languages, but in my language we have a saying that translates into something like:
"A Crow finds its mate".
Meaning something along the line that one shady figure finds another, and partners up with it.
I think it is appropiate here :)
I played Rage a lot, and really enjoyed most of it. I never understood the bad reputation the game got.
I hardly ever saw textures pop in, and it was never something that was detriment to my enjoyment of the game.
I really enjoyed exploring the (semi) open world and taking on the various...
Stop messing with the interface, and work upon making the browser compatible, faster and safer.
Firefox will not win by having the best interface. It will win by being the fastest, safest and most compatible / flexible browser. So focus on that.
Just an update on my progress.
I borroved a long extension cord with ground plugs and groundwire, and plugged my PC into an outlet with grounding in it.
And now it doesn't crash anymore. At least it hasn't crashed in the time its been hooked up with grounding. And I have really tried to...
Here in Denmark its a regulatory demand that grounding is present in some equipment (things like washing maschines or equipment that run on more than one phase).
So grounding is relatively easy to establish. I just need to install a new outlet, and run a grounding wire, to an existing...
Well neither have I :)
But this one does exist, and my hairs are getting grey because of it....
Upping the RAM voltage didn't help BTW.
I have now plugged the PSU into another outlet, to see if that makes any difference.
I will try to get something done about grounding it. Should be easy enough.
I am actually in a rather new building. Well new-ish, build 21 years ago.
I live in Denmark :)
The RAM has rather large heatspreaders, so it will be fine I think.
Thanks for all your suggestions, I really hope to get...
The power noise issue is something I have been thinking about too. And the problem affects DVI-D and Displayport too, just not VGA.
I'm also considering to get an earth wire routed to the outlet where the PC is hooked up. I have never needed it on my other PC's, but some people recommend it...
HDMI cable replaced with the one that came with the new monitor, and I also tried with the one I use for my TV. With no result.
I dont think its the wiring in my house. I have another, older PC up and running to (running as a NAS), it never crashes like this.
You are absolutely right, the...
I need some help, I'm running out of ideas.
Some time ago, actually some years ago, I got a new monitor from my nephew, as a present. Nothing extrordinary, a Hanspree 23". It has worked well enough, allthough I experienced that when using its HDMI input, the computer was unstable.
I, for one, am looking forward to the release.
I find the displayed results encouraging, allthough I will reserve judgement until the CPU's are in the hands of review sites such as HardOCP and Techreport.
Lets see how things go, some competition in the CPU buisness would be _very_ welcome...