Search results

  1. A

    Hyper v guest can't access network

    Problem has been solved. Still not sure of the source, but reinstalled network drivers and re-created virtual network, and issue was resolved. Thanks again for the help!
  2. A

    Hyper v guest can't access network

    Chas- I just tried a bridged connection and no such luck with that either.
  3. A

    Hyper v guest can't access network

    Chas- The guest is connected to an external connection setup within hyper-v Biznatch- I will try sharing the virtual adapter. Yes MAC addresses assignments are in the same range. Thanks!
  4. A

    Hyper v guest can't access network

    Hey Everyone, I have setup a new lab with two hyper v hosts with a guest on each host running Server 2008 R2. On Host A the guest can ping and connect to all needed network resources. On Host B the guest can only ping the host and cannot connect to network resources. Both Host A and B...
  5. A

    Filezilla Issue

    I was manually entering it at first, but now am navigating to it to remove human error.
  6. A

    Filezilla Issue

    Yes, it does. I have set Filezilla service to run under an administrator account with full access to the path.
  7. A

    Filezilla Issue

    Here is a log from filezilla if it is helpful (000019)12/4/2014 3:29:57 AM - (not logged in) (172.18.11.6)> Connected on port 21, sending welcome message... (000019)12/4/2014 3:29:57 AM - (not logged in) (172.18.11.6)> USER root (000019)12/4/2014 3:29:57 AM - (not logged in) (172.18.11.6)>...
  8. A

    Filezilla Issue

    Yes sir I am. Windows Firewall is disabled as well.
  9. A

    Filezilla Issue

    Sure... So my shared folder for my user is C:\inetpub\Ftproot\HPDM\Repository This is also the actual path. It is also set as my home directory. Thoughts? Thanks so much!
  10. A

    Filezilla Issue

    Firedrow, I have already done so. Still the issue persists. Would it be beneficial for anyone to see a screenshot or log of anything?
  11. A

    Filezilla Issue

    Thanks for replying. I have looked at those. My syntax for the share is correct, and I set filezilla service to run as an administrator account. Any other thoughts?
  12. A

    Filezilla Issue

    I just configured Filezilla Server, however I am getting a 550 CWD Failed "/mypath/dir" directory not found. I have done some reading and this can result in the home directory not being properly configured. Has anyone dealt with this before? Thanks!
  13. A

    Update HP Device Manager Agent Issues

    Hey Everyone, I'm trying to update the HP Device Manager agent on some thin clients. The Update_Agent task on Device Manager fails with the error "Failed to download files" If I copy the agent files to the C:\Windows\TEMP and run them from there the install doesn't succeed. Any...
  14. A

    Convert .WIM to .ISO

    Thanks for the replies everyone. I got it sorted it out. I was making an error copying the boot.wim into the wrong directory (face palm Monday morning mistake) Thanks Everyone!
  15. A

    Convert .WIM to .ISO

    Hey Everyone, I'm trying to convert a .wim file to a bootable .iso file. I am able to successfully do the conversion with the WAIK, however my .iso is not bootable. Any thoughts on it would be great. Thanks!
  16. A

    Adding a new switch

    goodcooper Sometimes it doesn't make since.. The lab is mine (I'm sr. virtualization lead) So.. since the lab is mine i'm responsible for the network, however if I want access to the switch that serves as the gateway for my lab I need cleared access to get to it.. Most of the times I...
  17. A

    Adding a new switch

    berky, This sounded like what I need to do. I apologize I haven't gotten a running-config of the existing switch yet. I'm still waiting on it myself. Normally it takes about 10 minutes to gain access to something like this.. Not this time... The joys of working in a classified...
  18. A

    Adding a new switch

    I'm working on getting one.. I work in a classified environment. Will post as soon as I get it cleared.
  19. A

    Adding a new switch

    Hey Everyone, I am usually the server, domain, virtualization person, however I need to add a new switch to a lab. It's a catalyst 3750 and there is an existing cisco switch in place. I simply just need to add some more ports to the existing subnet. What I have done is setup Vlan 1 to...
  20. A

    NetApp Monday Issue

    Issue Resolved! Thanks!
  21. A

    NetApp Monday Issue

    I have received a new Net App DS2246 and I cannot get it to auto discover using NetApps installer. I have a workstation and the netapp connected to a catalyst 3750 and I have setup a new vlan just for the management ports of the netapp. This is my first time setting a netapp san. I...
  22. A

    Power Shell and AD assistance

    Have you checked this out? http://blogs.technet.com/b/askds/archive/2010/02/04/inventorying-computers-with-ad-powershell.aspx I used some ideas from this to re-work what was in place at my current company.
  23. A

    Upgrading Windows Embedded

    I have a few various versions of HP thin-clients I need to upgrade them from Windows Embedded 2009 to Windows Embedded 7. My HP rep is telling me that there is a flash module inside of my thin clients that will throw licensing errors if install a different version of windows embedded besides...
  24. A

    Video Tele M2-10E

    I'm not sure this is the correct place to post this, but here it goes.. This-morning a Video Tele M2-10E was placed on my desk to test. However Video-Tele was acquried by a company called Tut Systems who was acquired by Motorala. So on and so on. Has anyone ever used or gotten into one of...
  25. A

    Video Tele M2-10E

    I'm not sure this is the correct place to post this, but here it goes.. This-morning a Video Tele M2-10E was placed on my desk to test. However Video-Tele was acquried by a company called Tut Systems who was acquired by Motorala. So on and so on. Has anyone ever used or gotten into one of...
  26. A

    Using rsync to back up files from macbook to synology

    It's been a few years, but I have gotten RSYNC to work with a variety of Linux and OSX machines.. What errors are you seeing?
  27. A

    AVHD Files HyperV

    Thank you sir, Problem has been solved.
  28. A

    AVHD Files HyperV

    I want to make sure that this is the same process if my VM is currently using the AVHD to run currently.
  29. A

    AVHD Files HyperV

    I did not delete the snapshot. So are you saying that I need to do the following: 1. Delete the snapshot 2. Shut Down the VM 3. Observe Merging Process
  30. A

    AVHD Files HyperV

    Can someone please educate me on AVHD files and how to force them to rollup into the main VHD file within HyperV? I have a VM that is running using a AVHD file and cannot seem to get it to rollup into the main VHD file by just shutting the VM down and giving it time to do the process as...
  31. A

    Help with looking for an IT internship as a teenager?

    Look into getting a job at your high school or college helpdesk. This is where I started, and have worked myself up to Sr. Engineer and got certs along the way as money started coming in.
  32. A

    Career Interview - Network Administrator

    1. Would you describe yourself as a nerd? I think someone has said socially no, but technically yes. This would apply here. 2. What's your favorite thing about administering a network. Working with the technology, and engineering solutions. I tell people my job is solving puzzles. 3...
  33. A

    IT Resume Thread

    Both would be greatly appreciated. Thanks!
  34. A

    IT Resume Thread

    Hey Everyone. I just thought I would throw my resume up here. I'm looking for something new in Phoenix AZ. If anyone is interested send me and email or PM. Thanks Alex Bryant Phoenix, AZ Phone: My Phone Number Alexbryant75@gmail.com Summary: I have a progressively...
  35. A

    RPC Server is unavailable

    I can run the script locally. Windows firewall is turned off.
  36. A

    RPC Server is unavailable

    I have tried those. I'm wondering if there is a closed port blocking it.
  37. A

    RPC Server is unavailable

    I'm working with a powershell script that backups and clears the event logs of specified servers. Powershell remoting is enabled on all the servers necessary. All servers are in the same AD domain. However when I go to run this script I get an error that the RPC Server is unavailalbe. Any...
  38. A

    Best Instant Messaging Solution

    I'm looking for a corporate IM solution that can use LDAP authentication. My suggestion of Lync was shot down due to budget reasons. Any thoughts?
  39. A

    Send SMS to all users

    I have inherited our exchange 2010 setup. What I would like to do is setup a script to send a monthly test sms message to all mail contacts in exchange that have numbers setup for sms messaging. Any input on how I would go about do this would be appreciated. Thanks!
  40. A

    Link on Outlook Web App login page

    I would like to place a link on my OWA login page. Has anyone done this before?
Top