I grabbed a sunix 3000 mini dp variant but having issues getting a good looking 1920x1200 85hz image up
how are you guys adding custom resolutions? I added 1920x1200 85hz but left the timings section alone and the image hardly fills up half the screen and not sharp at all.
Are there even fuses on the board?
I have a feeling its something simple, work case scenario its an excellent condition parts unit for the other new one.
Haven't had a chance to swap boards yet, want to go slow and not leave any marks on the new one
Can anyone recommend a good power/noise...
Sadly one of them won't power on (the one that was in the box but previously opened) so I have to start swapping boards from a working one to try and figure out what the issue could be. Who knows why these sat at nikon for 13 years
It's pretty crazy when you think about it, who knows how many...
building a spare rig for video editing and dedicated streaming
x58 classified non usb 3.0/sata 3
not sure which route to go for storage, I've read m.2 ssd's like the samsung 950 pro can be used for a boot drive which would be ideal for me but it would run at 2x pcie speeds so...
Turned out to be junk, lots of interference on the screen and the need to toggle the resolution everytime, lack of power button etc is a deal breaker. Went ahead and ordered an hdfury 2, hopefully that's better.
yeah went from a 290 to a 980
With vsync off I have some minor tearing, with it I don't get any dips in FPS and it's buttery smooth. Have yet to play around with lower res and high refresh rates
Anyone here know of any solution for blurry corners? my bottom right corner is pretty blurry, might...
I'm going to use this primarily for hdmi consoles on the fw900 so no need for more than 1080p/60, but lag may be an issue (though I doubt it would be more lag than a console straight into an average lcd hdtv)
Whats the best program/website to check lag with?
I have an older pc with vga that...
Have had my eye on this for a while as an alternative to the current hdfury offerings
Extron Digital to Analog Converters - DVI-RGB 200
does 1920x1200 60hz max if I read the user guide properly, Not exactly amazing but would work very well for consoles via an hdmi adapter. Extron build...
so whats the best card that still has analog support
was hoping the 1070 would have it but looks like nv dropped it from all of their cards
also does anyone know if the fw900 supports 1:1 pixel mapping? I have an rgb scaler that requires it to get the most out of the scaler
doesn't look widescreen to me at all, you can see the small broadcast monitor to the left which is 100% 4:3 and the vga monitors in question have a similar aspect ratio
Anyway I did some digging and they seem to be NEC MultiSync FE700 or similar monitors
Also other then the fw900 and its...
Make sure it's not something stupid like the cable and see if it does the same on both inputs. If the issues persist then see if tapping it lightly in certain areas effect it, might be a bad solder joint then.
Been messing around with the osd and was wondering how fine can the geometry be tuned with windas on these? Is it possible to get near perfect geometry and even convergence with windas? Is it even worth messing around with windas if your geometry and convergence is like 8.5/10