Search results

I'm genuine, without added substances... xD

oh my god... it was in front of my eyes but I was searching for sell/buy and it was sale / trade... lol I'm sorry guys!

I'm serious... why I don't see a sell and buy section on the forum? :D

As title. Is there a section of the forum where we can sell/buy components from other users?

Why sell a 12900K for a Ryzen now? Even Zen4 would not be a big upgrade imho.

maxed out for sure, but at what voltages? :D

Correct, from 2 sticks at 6GHz, I need to lower to 4.4GHz to get 4 sticks stable. I have tried all the suggested voltages for big OC and 4.8GHz became a little bit more stable but it isn't 100% stable so I reverted back to 4.4GHz.

at the end I was able to run 6000MHz no problem on my 2x16GB Samsung Corsair Dominator 5600MHz C36 using XMP and no other settings changed apart the ram frequency. if I add two sticks more I goes down from 6GHz to 4.4GHz since I can't get 4.8GHz stable with 4 sticks. How this can be possible...

Those are all my settings. Basically the voltages that worry me are CPU Core/Cache Voltage [Adaptive Mode] - > Additional Turbo Mode CPU Core Voltage [1.36000] Memory Controller Voltage [1.25000] DRAM VDDQ Voltage [1.35000] DRAM VDD Voltage [1.35000] DRAM VDDQ Voltage [1.35000] DRAM VDDQ TX...

I can run 5200MHz on 2 sticks but not with XMP at 5.6GHz.

DDR5 is full of false advertisement, bad marketing and a lot of missunderstandings. This is the reality of the current situation. There is no single rank 32GB DDR5 modules currently. This means that if you want 64GB of DDR5 memory you have two options. Get a 2x32GB dual rank modules. Get a...

but is it safe to run "CPU System Agent Voltage" to 1.25V? My Asus mobo shows values greater than 1.2V with a warning. same for the Memory Controller voltage, everything over 1.2 in in yellow (means warning)

12900K, reaseated everything, if I put things on A slots sometimes does not go over 4GHz and sometimes does not boot. I have seen similar problems with other asus boards... https://rog.asus.com/forum/showthread.php?126711-Bundled-DDR5-modules-not-working-with-Strix-Z690-F

I have reset the bios, how can I reset the CPU? I discovered that if I use only B slots I can use 5.2GHz. If I put something on A slot frequency is locked at 4Ghz

my problem now is that I can't go past 4GHz. with 2 or 4 sticks. default settings push the ram at 4GHz only

done, it doesn't helped. I'm pretty worried that I have a faulty motherboard. I have tried with another kit also. I have 2 banks of Patriot 4800MHz C40, even with the two patriot I have the same problem.

Sorry I explained it bad, there is no update since I'm already running 0803 bios

Nothing reset to default, it should go to 4.8GHz and not 4.0GHz.

On the Asus site there is no update

yes but the base speed should be 2.4GHz and not 2GHz. I have manually set 4.8GHz in bios but still no luck, I'm stuck at 4GHz on the RAM

what do you mean for base speed, I never see more than 2GHz in the freq... isn't supposed to be 2.4GHz at default settings?

another thing... this is my default bios settings. If I manually set the frequency to 5200MHz I can boot but CPUZ always shows 2000MHz. Isn't a DDR at 2000MHz operating at 4GHz? If yes why? I see 2001 MHz in CPU with default bios settings and by manually setting 5200MHz, why?

I have just both 64GB of Corsair Dominator 5600MHz C36 (4x16GB). Using a Z690 Maximus Extreme mobo... If I don't enable XMP, RAM works well, if I enable XMP, it doesn't boot :( Why? :(

nice to know it guys, thank you all

ctstate makes my OC unstable when I switch from idle to AVX256 full load like Prime95.

Cstate make my OC unstable and don't understood why. https://hardforum.com/threads/my-12900k-overclocks-well-if-cstates-are-disabled-why.2016122/

at the end I discovered why my OC is unstable. after an entire day passed benching and trying I found the coulprit. CSTATES makes my OC completely unstable when using AVX256 with Prime95. Using sync all cores 5.1/4.0 with AVX offset 5 and OCTVB +2. those are my settings: even if CSTATES is...

done it, after adjusting the voltage that is crazy high at default settings my 12900K is perfectly stable and does not go over 75°C during rendering.

I'm using the right mounting kit, this should not be the case :)

three QL120 fans on the RAD as intake and 3 QL120 fans as exhaust.

so am I safe until 100°C?

H150i Elite LCD from Corsair. it's a 360mm AIO. what does the spec says? what temp is considered safe?

Hi all, my 12900K reaches 85°C during rendering at 22°C ambient temp. During summer ambient temp can go up to 32°C this means that my CPU should hipotetically reach 95°C during rendering. Will I damage my CPU by rendering in summer?

AMD doesn't sold me something I can't buy.

I have 4K euros of components getting the dust because there is no DDR5 in the entire europe. My "refund window" is expired and I can't even ask for a refund. Shops here says that there will be no DDR5 for months, a lot of months. I have spent a lot of money for the components and I will not...

Now batteries are hot swappable so no problem with newer models.

I'm in Europe/Italy. We use C13 for UPSs

I bought a PR1500ELCD and it's a beast. It can handle 600W for half an hour while gaming and the PC in idle for hours.

Hi there, is there someone who have experience of Corsair HX1200i PSU? Is it good enough for a single GPU system? What about quality and reliability? I will use it with a 3080ti and a 12900k OC. I know that 1200w is too much for that system but hx1200i is the only one I have available now.

I feel that the best value is now on Cyberpower UPSs