Search results

  1. A

    ASUS VX238H Service Menu

    Hi Everyone, I just bought a VX238H and took a look in the service menu. I found some settings and wanted to know what they do... and if they are set correctly. They are Vcom, Freq, and Amp. Vcom - 66 Freq - 28 Amp - 1 Any insite would be appreciated. Thanks!
  2. A

    Asus Maximus IV Extreme CFG Lock Disable?

    All, I have been searching to see if there was a way to disable the CFG lock on the Asus MIVE. I have seen some posts for BIOS descriptions stating that the CFG lock can be disabled to increase superPI scores. I am not able to find this option, does anyone know where it is... or if it actually...
  3. A

    Asus MIVE - Intel VT?

    I was wondering if anyone knows if the MIVE P67 support Intel VT for direct I/O. I did see a setting to enable virtualization, but wasn't sure if this was the same thing as VT for direct I/O. Any input would be appreciated. Thanks! Adam
  4. A

    Sell my HD6950's and get 2 GTX570's?

    Guys, I need some opinions. Should I sell my 2 (1 month old) 6950s on eBay and get two GTX570's? I don't want to have to worry about my microstuttering issues anymore (see Intel board for thread if you're wondering). I can probably recoup most of my money by selling them, but I'm not sure...
  5. A

    Micro-stutter - 2600K, 2x 6950 (ShaderUnlocked), 8GB GSkill 1333 CAS7

    Hey Guys, I'm at a loss, and need some help. I have a brand new build and I'm getting some micro-stuttering. I have the latest 11.4 drivers with CAP3. I'm using RadeonPro with profiles for each game. I use vsync and found that my framerate will bounce between 60 and 61. When it hits 61, I...
  6. A

    A third 6950 or watercool my current cards?

    Hey guys, I currently have a Koolance WC setup (see sig) and was thinking about watercooling my two 6950s (I have them OC'd and unlocked). However, I was thinking of adding a third card instead. A third card would be about 30 - 40 bucks cheaper than WC'ing my two current cards. I wanted to...
  7. A

    i7-2600K on M4E, low vCore but hot!

    Hey everyone, Long story short, I RMA'd my original i7-2600K in hopes to get a better OC'er as my original couldn't hit 5Ghz no matter how much vCore I through at it. The replacement processor I got is a Costa Rica version and can hit 5Ghz stable on 1.44 vCore. What is strange is that the...
  8. A

    i7-2600K on M4E, low vCore but hot!

    Hey everyone, Long story short, I RMA'd my original i7-2600K in hopes to get a better OC'er as my original couldn't hit 5Ghz no matter how much vCore I through at it. The replacement processor I got is a Costa Rica version and can hit 5Ghz stable on 1.44 vCore. What is strange is that the...
  9. A

    Maximus IV Extreme - How to use iDirect from outside your network

    [EDIT] The below steps can also be used on the TurboV iPhone app for the P8P67 boards. So I was thinking, there had to be an easy way of forwarding some ports on my NAT device to get iDirect to work via 3G. Well.... I was right. Here are the steps: 1 - Forward port 9999 to your PC that is...
  10. A

    AI Suite II installer crash on Windows 7 x64 with B3 stepping

    I got the new MIVE and tried installing every version of AI Suite II you can think of (even the CD version). The installer starts, then hangs and crashes. I've done a clean install twice with no change. I found some others on a different forum with the same issue, and wanted to see if anyone...
  11. A

    Maximus IV Extreme w/ RST causes drive to disappear

    Here's a weird one, I just got a B3 Maximus board yesterday. Installed it and performed a clean install of Windows. I installed the latest RST drivers and found that the D drive (my 1 TB storage) disappeared. I also started receiving USB power surge warnings for the USB 3 controller. I...
  12. A

    Instock M IV E's

    http://www.chiefvalue.com/product-_-productdetails.cv_-_item--CE00160060010060
  13. A

    NF200 w/ ATI Crossfire, drivers needed?

    This is from the Asus post regarding BIOS/Driver updates for the various P67 boards. I'm going to be getting a WS Revolution and wanted to know if these NVidia drivers were required when running ATI Crossfire. I realize it says "using NVIDIA cards", but I wanted to make sure and get some...
  14. A

    AI Suite II V1.01.14 or .17?

    I wanted to know which version everyone is using, the ASUS downloads page has .14 listed under the P8P67 Pro, but .17 listed under the WS Revolution. I was just curious as to which version you all are using on your P8's.
  15. A

    P8P67 Pro 82579V NIC running at 100 mbit only?

    Hi Everyone, I have a P8P67 Pro with the latest 16.1 Intel LAN drivers installed (previously had 15.6 and 16.0). I have noticed on with each driver set, that my NIC eventually switches to 100 mbit and will not flip back to gigabit. I have ran the diagnostics and everything comes back fine...
  16. A

    First it was shoes, now it's motherboards

    http://www.asrock.com/mb/overview.asp?Model=Fatal1ty%20P67%20Professional Fatal1ty has his own ASRock motherboard coming out. I'm surprised they didn't throw in a NF200 chip to compete with the M4E and UD7.
  17. A

    My 5Ghz Stable Settings

    I was having over night freezes and weird OC lock ups. Since I have set these settings, I haven't had any issues. I ran the Extreme auto-tune and increase the BCLK to 104.2 and the LLC to Medium. I'm also running the 1305 BIOS. I am running under water, so this may not work on air. BCLK...
  18. A

    P8P67 Pro - Flashed back to 1253, no more reboot issues

    I was having reboot issues where the system would shutdown sometimes instead of rebooting. I flashed back to 1253 from 1204, seemed to have fixed the problem. Fingers crossed for 130X today!!
Top