I use this board and I love it.
I dont overclock I just want a stable mATX board that will run the latest components and this thing just works.
Since the 0702 BIOS update I have had ZERO issues with it.
Im running AMD X2 4400 with a Geforce7800 and 2 gigs of ram and the machine runs like a...
Well the problem isnt as much as the difference in the readings, its in the fact that if the Asus board readings are correct, that means I have a problem. Having a full load go up to 55 degrees is not something I wanna do. I dont wanna bring in instability due to overheating. Hell even idling at...
I recently replaced my Gigabyte motherboard due to all the problems it has with the Asus A8N-VM CSM.
For whatever reason my cpu now runs almost 10 degrees hotter than it did when I ran it on my gigabyte.
It idles now at around 44 degrees and goes up to 55 degrees on full load...
I'm hoping if enough people send their complaints directly to Gigabyte they might actually look into this problem.
Hopefully whatever it is could be fixed in a BIOS update unless its some mass manufacturing problem in which case we're all SOL.
I had the same problem with the PVMT-9. I ended up RMA'ing half my parts until I realized it was the motherboard. I just ordered the Asus 6150 motherboard.
I went as so far as calling Gigabyte regarding this problem along with the MACHINE_CHECK_ERROR. They refused to acknowledge it at all even...
I was looking to get the ASUS. But after waiting months and one delay after another I went with the Gigabyte since it at least had the 430 chipset. Even now the Asus 6150 board isnt that easy to get. From the intial reviews the only complaint with the board was its lack of overclocking features...
I've had the GA-K8N51GMF-9 for almost a month now and I've had nothing but problems. I keep receiving the MACHINE_CHECK_ERROR and from various posts on forums and on the newegg reviews I am not the only one.
Im not looking at overclocking, just lookin for stability that was the reason I went...
Well it seems it may be the motherboard. Seems I keep stumbling upon alot of posts with people that have that gigabyte motherboard having the MACHINE_CHECK_ERRORS
Here what someone wrote on a newegg review:
Comments: I had the same Machine_Check_Exemptions error when I first ran the m/b in...
I think its the motherboard.
I also have that Gigabyte motherboard and I keep getting the MACHINE_CHECK_ERRORS all the time in the middle of games.
Also look at the reviews over at newegg, seems lots of people that purchased that board are getting the same thing...
I recently built a new PC and I am unfortunatly getting the dreaded "MACHINE_CHECK_ERROR" that I've been reading about. Im hoping maybe someone can tell me what the rest of the parameters of the error mean
The following are...
Wow you're right. I put back the stock Qpack PSU and everything works fine. Never would have though this ANTEC NeoHE would be the problem. Gonna go RMA it with newegg.
You have any suggestions of which PSU to go with instead that would fit well in the Qpack?
I recently put together a Qpack Rig with the following specs
AMD64 X2 4400
Antec NeoHE 550 PSU
2GB OCZ Performance Ram
WD Raptor 74gb drive
The problem Im having is with the video card. I first purchased an eVGA 7800 N517 which when I first built the system worked sort of...
I got the N517 card a couple of days ago.
I have the latest BIOS on it but it gives horrible artifacts in windows sometimes when I bootup that require me to reboot until it fixes the problem.
Games lock up most of the time.
I underclocked the core down to 445 from its "stock" 470 which...
I have read others that have this issue but I am ready to RMA it back to newegg.
The video card gives out horrible artifacts in windows and locks up games unless I underclock it from its "stock" speed of 470mhz down to at least 450mhz or lower.
Even then it locks up once in a while...
I just got it. I only had a moment to try to install it but it seems the only way for it to fit "right" was to install it upsidedown with the cable on the left side with the antec logo on top. Is that how you did it? I havent began to put in the motherboard and the rest yet but I think thats how...
This is the response I received today from zipzoomfly.com in reguards to the ETA on the 6150 boards they have listed on their site:
From: service zipzoomfly [firstname.lastname@example.org]
Sent: Tuesday, November 01, 2005 6:48 PM
Subject: RE: Backorder?
Thank you for contacting...