Nothing stopping you from putting 10mm+ feet.
We already tested the 120mm Koolance Radiator + Noctua 120x25mm Sterrox Fan via 9900K, I will post temperatures later, but it's not a concern at all, in fact, I don't think we even need 240 AIO.
Dust filer needs some testing, there is some trade...
CES 2019, special thanks to 3lfk1ng for thermal testing and volunteering his Ghost S1 + 26mm Top Hat
SideArmD Project Prototype 1
Intel i9-9900K + Asus Z390 ITX
Fr33Flow 48mm CPU Block + Pump Prototype 1
Koolance HX-CU420V Radiator (120x30mm, 30FPI, *Copper)
Noctua Sterrox Fan...
Update: 240 AIO support and no size increase, working it out with OEM.
The 240 AIO I want to support is the Alphacool LT240, it's a 240mm by 25mm thick *Copper AIO that's also expandable. It also features the DC-LT CPU Block Pump less than 48mm tall. As you can see the review here...
Using 5mm feet:
- for the 120mm AIO fan, the intake clearance is 30 + 5 = 35mm
- for the rear fan by the mobo, it’s 5 + 5 = 10mm
The feet can attach to the Top or Bottom Panels through the vent holes. That also means you can use other taller meet as well and attach with a screw through the same...
Update 2019-04-09 : Slow, but not forgotten. Making prototypes using aluminum. Once designed finalized, will make POM version.
Update 2019-01-14 : Block Pump Prototype 1
A lot of you guys are familiar with the Swiftech Apogee Drive ii, but it's too tall (~66mm with fittings on one side...
The initial project stalled, but I never gave up.
Material: CNCed from 10mm 6061 aluminum + 1.5mm aluminum metal brackets
Side panels: Vented Panel / Tempered Glass / Acrylic, window on both sides
Colors: Anodized sand blasted space gray for exterior, anodized black for interior...
We have been working to get a low profile (<48mm) CPU DDC Pump Res combo that will work for the M1, A4, C4 and Mach One.
Here are some pictures of prototype 1.
I have more ideas than time to execute, so we ask you guys to be patient, the product will only get better with iterations on our...
Having one side missing allows for easier installation into the bag with padding.
You can use the smaller padding on the missing side.
V2 is indeed more versatile, and it had to, if we made a bag limited to carrying the M1, the demand would be less, and the cost per unit would be crazy - most...
Our manufacturer in China has a Typhoon problem. There was severe flooding in the entire region, so our project and even those ahead of us are all delayed.
Right now the factory told us to give them extra 1 month.
Just wanted to let people know in case they are waiting for bags or...
The chassis at 1.5mm SECC would increase weight from 3.5kg to 4.5kg at minium, the shipping cost will increase by $10-$15 depending on the country..
Steel threaded inserts can address this problem.
The weight will increase by 50% with 1.5mm SECC Steel, shipping will be 50%-100% more - not...
I have to do something with G-UNIQ guryhwa for Aug and Sep, Mach One is on hold for a bit. I been planning a collaboration with G-UNIQ since 2017, it's go time and it will suck up all of my free time.
3lfk1ng is prob 50% done with prototype 1 testing. Testing highlight so far:
The MLC Phoenix 280 + Mini-ITX will fit, it was designed with it in mind on a single loop.
the 2.5" drive bays are mounted on the bottom of the chassis, the number supported depends on config, but minimum two, targeting minimum four for all 3 gears.
These thin rads can make the dual 240mm radiator setup more interesting.
Maybe window and single radiator under the GPU as well.
Spec - i9 7900X + X299E-ITX/AC + Titan XP + Corsair SF600 (600W SFX).
I had a EK water block on, it was working fine and then a week ago started getting this problem. Today, I put the air cooler back on for testing (new thermal paste + pads), the screen goes black and the GPU fan goes full...