Search results

  1. G

    Dell U2413 and U2713H Official Information Appears

    I bet this time all Ultrasharp series are powered by STMicro's Driver ICs.
  2. G

    27" 2560 x 1440 VA panel in production.

    AHVA is very much similar to IPS/PLS in many aspects, Viewing angles, native panel Gamma R/G/B Curves less than 2.2(+/- 0.1),
  3. G

    Are LEDs safe for eyes?

    It is largely due to the fact that most LED backlight units are opted for mass quantity instead of quality, only a few medical grade monitors consist of japanese-made BLU units from Nichia. Also it is worth noting that the color calibration would not solve the problem. Even after...
  4. G

    Dell U2413 and U2713H Official Information Appears

    However the new one has relatively shorter backlight lifetime of 30000 hours, as opposed to 45000 hours in legacy WCG-CCFL model.
  5. G

    Professional photographer looking for best possible monitor for precise photo editing

    There are a few differences between them. I suggest you to take the closer look at their sRGB Emulation performance, especially Max ΔEab and AverageΔEab back to back.
  6. G

    NEC monitors worth the extra money?

    On the contrary, Monitor Calibration is just 1st part of the color management, which is followed by the Characterization of the Color Management Software/Hardware and the Conversation of the Device Communication between the Display and the Printer .
  7. G

    Professional photographer looking for best possible monitor for precise photo editing

    http://www.eizo.com/na/purchase/where/distributors.html Are you looking for basic preview or advanced print to match functionality? Legacy 90 Series are in fact suitable for preview purpose, while the current P/PA(Except P221W) have the edge over the previous generation with print to match...
  8. G

    Professional photographer looking for best possible monitor for precise photo editing

    What I can distinguish between PA and CG series is its sRGB Simulation Capability. On the first glance, they look literally the same. However, absolute colorimetric values tells the difference between them.
  9. G

    S27B970 Impressions.

    The price is not consistent with its claimed performance, which is still worse than legacy product lines from EIZO CE240W / NEC 90 series. Embedded HW Calibration/16 bit LUT feature does not show huge performance improvement from S27A850D with same panel model.
  10. G

    EIZO ColorEdge Series with LED Backlight

    http://bbs.kakaku.com/bbs/K0000402453/#14972511 Found the CX240 preview posted in the Japanese Website called "kakaku.com". It seems to me a solid product however the price to performance ratio is not comparable to NEC PA/P Solution. Please note that "All CX240/CX270/CS230 series" require...
  11. G

    Dell U2713HM

    ALL AH-IPS Panels share same "Anti-Galre Polarizer", which is semi-glossy.
  12. G

    Dell U2713HM

    Scalers between U2711 and U2713 are not exactly the same.
  13. G

    Dell U2713HM

    The following white paper may further expand your understanding about the importance of the LUT. http://www.barco.com/barcoview/downloads/GrayscaleResolution.pdf
  14. G

    EIZO ColorEdge Series with LED Backlight

    Did you license Spectraview in addition to your PA271W ? Spectraview enables PA series potential performance to certain extent. I personally have bought montiors from either EIZO or NEC respectively. EIZO's after-sale service does not live up to its premium price these days, while NEC Customer...
  15. G

    EIZO ColorEdge Series with LED Backlight

    ColorEdge CG246 is over 2000 USD, I think.
  16. G

    Dell U2713HM

    Beware the uniformity issues that may disturb you. Or wait for the coupon.
  17. G

    Dell U2713HM

    With 14/16 bit internal display LUT (EIZO/NEC) and 8 bit output, what you can get is 100% grayscale on variety of gamma curves. A few new scalers from STMicro are now available for preview/evaluation instead of mass production. You may find some new features here...
  18. G

    EIZO ColorEdge Series with LED Backlight

    http://www.eizo.co.jp/products/ce/cg246/index.html 有害物質の水銀を含有しないLEDバックライトを搭&#36617...
  19. G

    S27B970 Impressions.

    I get the refund after two days of usage.
  20. G

    Dell U2713HM

    LUT in this display is limited to 8 bit Processing/Input, which seems not suitable for many color critical applications.
  21. G

    S27B970 Impressions.

    Two of mine CG275 & P241W have this feature already since their early legacy models, EIZO CE /NEC 90 series.
  22. G

    S27B970 Impressions.

    The Uniformity embedded in SB970 is only available for "Hardware Calibration Mode", which is very strange considering its target customers. I do not see any features to justify its retail price.
  23. G

    S27B970 Impressions.

    27 inches 16:9 screen size is slightly bigger than 24 inches 16:10 screen.
  24. G

    S27B970 Impressions.

    You should read the calibration performance comparisons before you reach the verdict. http://www.tftcentral.co.uk/reviews/samsung_s27b970d.htm
  25. G

    S27B970 Impressions.

    http://www.tftcentral.co.uk/reviews/samsung_s27b970d.htm "Calibration Performance Comparisons"
  26. G

    EIZO ColorEdge Series with LED Backlight

    http://www.eizo.com/global/products/coloredge/flash_introduction/index.html Apparently no actual review is up until later this year.
  27. G

    S27B970 Impressions.

    S27B970 does not really stand for its price as well as its performance. Hardware calibration: Fail Software Calibration: Fail For the same price, you can buy 2 X P241W. Epic Fail Product !
  28. G

    S27B970 Impressions.

    I would like to know the calibration performance. Any calibration profile is welcome.
  29. G

    Samsung S27B970

    From the recent information I gather, all things indicate that SB970 is not suitable for professionals.
  30. G

    Samsung S27B970

    You can either choose grayscale priority or contrast priority. It's up to you.
  31. G

    Samsung S27B970

    Look up the LTM270DL02 and you will have relevant information about its backlight lifetime =30000 hours, which is roughly 30%-40% less of typical ccfl backlight lifetime.( sRGB LM240WU7 for 50000 hours, P-IPS WCG LM240WU4 for 45000 hours)
  32. G

    Samsung S27B970

    70-80cd/m2 is enough. please note that brightness level is in close relation to backlight lifetime.
  33. G

    Samsung S27B970

    I would say with 99.9% certainty that you need to replace your calibration device.
  34. G

    Samsung S27B970

    If you are still not far away from you computer, you may try this Calibrator Device: i1 Display Pro White Point: 0.3127, 0.3290 (Daylight 6506K) Brightness: 70 or 80cd/m2 Balck point: General values Gamut Mapping: sRGB Gamut Curve: sRGB ( Alter the values from LUT to sRGB)
  35. G

    Samsung S27B970

    There is no support of i1 Display 2 in this series. I guess that you calibration device is i1 Display Pro.
  36. G

    Samsung S27B970

    I currently own NEC PA241W and EIZO CG245. I am not employed by Samsung Corp. ---------------------------------------------------------------- Have you tried i1 Pro ?
  37. G

    Samsung S27B970

    1. Currently there is no actual hardware calibration support of S27B970 included in numerous 3rd party CMS packages like Basiccolor as well as iColor Display. 2. Borrow two different calibrator devices(Colorimeter vs Spectrometer) and make various tests between these two devices. 3. or make...
  38. G

    Samsung S27B970

    Here is the instruction in reference to S27B970D manual. (page 23 out of 67) Select Only Brightness to perform calibration only for the brightness. Select Brightness + Color to perform calibration for both the brightness and colors. If you select Brightness + Color, the color temperature...
  39. G

    Samsung S27B970

    There are two major uniformity options in NCE software (Exclusively for S27B970D). The first one is the brightness adjustment. and the second is the enhanced adjustment of brightness and color temperature, which has been the standard feature across many professional monitors.
  40. G

    Samsung S27B970

    I highly recommend you to look into the default folders for hardware calibration. Also when the calibration was done, did you get any notice about renaming the preference of the Icc profile?
Top