Search results

  1. Z

    Intel extreme setting sometimes drops to default?

    No matter what I do neither throttle stop or XTU is consistent. one day it will work all the time the next day five minutes or not at... There has to be some random HP software governor running here.....
  2. Z

    Intel extreme setting sometimes drops to default?

    here we go again I am sending logs I ran into power drop again with a custom plan so I tried ultimate performance... maybe having the custom plan minimum CPU at 5 percent made it throttle but if it did it was intermittent. also turned off Notebook fan control... It did not drop power on...
  3. Z

    Intel extreme setting sometimes drops to default?

    there are no uefi settings in this machine worth a crap its a low end laptop
  4. Z

    Intel extreme setting sometimes drops to default?

    Wow I really thank you for the info I was having a hard time finding good info about the tpl settings. So what I will do is follow your settings. I had read that the agent and graphics had to be the same.... I don't know why but this little laptop has sort of become an obsession squeezing...
  5. Z

    Intel extreme setting sometimes drops to default?

    I had all ready reset all xtu settings back to power defaults and uninstalled it before this, as I figured the two programs might interfere with each other... I have hibernate disabled and I don't allow the machine to ever sleep as I have heard sleep mode does not always work right... I have...
  6. Z

    Intel extreme setting sometimes drops to default?

    I give the F**K up last night I played Bioshock 2 remastered for a couple of hours ran tons of heaven and Valley benchmarks...worked flawlessly. Tonight it went flaky again TDP dropped back again to 15 and I did not change a thing.. WTF is going on here.....there has to be a reason....something...
  7. Z

    Intel extreme setting sometimes drops to default?

    Finally figured out how to keep my 10210u I5 10th gen at full tdp.. Could not get XTU to stay at full tdp factory was 15, I set it at 25 but it would sooner or later drop back to 15.. THrottlestop so far has worked by disabling and locking power limits, A big but though is I cannot undervolt at...
  8. Z

    Intel extreme setting sometimes drops to default?

    F**k I don't know what is going on here... Last night it worked beautiful. I ran benchmarks and prime 95 today for two hours.. I then turned it on a few minute ago and the problem returned again after I ran it for a awhile I rebooted and now perfomance is back.... WTF I'm running out of ideas....
  9. Z

    Intel extreme setting sometimes drops to default?

    I put heat sinks on temp did drop still testing though..
  10. Z

    Intel extreme setting sometimes drops to default?

    Nope but it was an hour or so before the problem reappeared then it went away after I let the laptop sit for a little while I'm beginning to think the VRMs are cutting current when they get warm. I'm not sure what VRMs look like but I still have a few thermal mini heat sinks left Here are a few...
  11. Z

    Intel extreme setting sometimes drops to default?

    I may have solved the problem but not with throttlestop. I reinstalled XTU and just did one thing put the TDP at 25. with NO undervolting or anything else. I hope I don't jinx myself but not dropping back in watts anymore, bench peaking at 25 watts but not dropping to 15 watts any more. I think...
  12. Z

    Intel extreme setting sometimes drops to default?

    my bad the screen res was at 1280 by 720 and the bottom row of the screen wasn't showing now fixed
  13. Z

    Intel extreme setting sometimes drops to default?

    sorry for the pic screw up stupid snipping tool the only one is the menu the attempt to undervolt with save immediately set and the one that shows it did not take
  14. Z

    Intel extreme setting sometimes drops to default?

    Here is ini file [ThrottleStop] StartFailed=0 FileName=C:\ThrottleStop_9.2\ThrottleStop.ini GUID0={0CDEBB13-FF60-4A6F-8EC2-F4BDA1D670A4} GUID1={85C4C0A3-1200-42AB-B24E-6590BA0ED0AE} GUID2={50F4E652-4D4A-4D36-A10D-E1E0F6005A8D} GUID3={7D7FBA69-E6FD-4135-8C92-2BFEB6A221E6}...
  15. Z

    Intel extreme setting sometimes drops to default?

    I have tried everything even set file properties for everyone to full control. Ran as administrator even though I have admin privileges. Deleted the ini file. save immediately does not work, save when close does not work.... Have restored all settings to stock and totally uninstalled XTU. Only...
  16. Z

    Intel extreme setting sometimes drops to default?

    the adventures of my 10210u I5 continue. I get 50 fps using Intel XTU. core offset at -.085,Graphics at .050, Turbo Boost short power max at 30 W, Turbo Boost power max factory is 15 have it set at 30, Using Afterburner with Valley I see max temp of 72. using ADIA 64 no throttling.. power...
  17. Z

    real laptop High perfomance internal fans?

    Now I'm not talking a normal replacement fan but an Upgrade fan with higher airflow, more rpm and good reliability.. Anywhere to get one? for HP 14m-dh1003dx , factory fan seems a bit under performing......
  18. Z

    azure AI and Nahimic someone tell me WTF their good for?

    I never install any crap some comes preinstalled Nahimic for example and then idiot manufacturers include 3d sound garbage (Nahimic) in with the Realtek driver.. Like I posted you have to use hacked drivers or really older drivers to NOT install this garbage, thanks Gigabyte.....I really needed...
  19. Z

    azure AI and Nahimic someone tell me WTF their good for?

    I was tweaking my 2019 Gigabyte Aorus laptop. Finally got Nahimic uninstalled including the Nahimic software component, After that I looked at Azure AI that came installed. Virtually every benchmark had stuttering and turbo modes both CPU and RTX GPU were all over the place. Lower benchmarks in...
  20. Z

    Black cloth tape inside laptop

    I have thought of a better way I have a bunch of flat adhesive backed copper shims i could stick to the heat pipe. My only question is isn't the heat convection what moves the fluid in the heat pipe and would the copper shims cool it so the heat pipe might not work properly?
  21. Z

    Black cloth tape inside laptop

    clock control is by using powerplan only I have a registry hack that enables special boost mode no boost, enabled, enabled efficient, aggressive, efficient aggressive, etc and a couple of others I found that efficient aggressive works best the default cpu speed is 1.6 but turbo is 4.2 , the...
  22. Z

    Black cloth tape inside laptop

    I used a little pair of nippers... could have been neater I suppose....I do have a dremel though....
  23. Z

    Black cloth tape inside laptop

    i actually may do the more heat sinks mod eventually. as far as voltage, use Intel extreme tuning utility to turn up the TDP to 25 watts from HP stock 15 watts and set turbo at 30. Undervolt is at -85 graphics at -50. I gained 25 percent in FPS 40-41 to 50 fps... in Valley at 1280 by 720...
  24. Z

    Black cloth tape inside laptop

    There are no water blocks they are Raspberry PI adhesive tape backed heat sinks, they are stuck to the the copper piece in the heat pipe that sits on the cpu die, Kryonaut is the thermal paste used on the copper to cpu die.. a fan cooling pad is also used... my thought was that the air being...
  25. Z

    Black cloth tape inside laptop

    Good performance a little ghetto for the heatsink but it all works fine ....... done modifying nothing more to be done...
  26. Z

    Black cloth tape inside laptop

    got my heat sink fins attached to copper plate of heat pipe unfortunately even the PI heatsinks were a little too tall attached with thermal tape. as you can see a slight further mod to laptop case Final result 74c dropped to 70 under Valley load top Fps at 1280 by 720 was 50 fps up from 40...
  27. Z

    Black cloth tape inside laptop

    just for snickers I did the hole enlargement took me three hours to drill out all the holes. if you look closely you can see the copper under the vent hole on left side. Don't believe a heat sink will fit not even a 16th of an inch space.....temp drop of about two degrees.......
  28. Z

    Black cloth tape inside laptop

    Yep those are my options. Think I will drill out the holes and add a heat sink with adhesive pad, if the pad shows gain then I'll thermal epoxy the heat sink.... Don't think I can do much more with this machine..... Hey thanks for your input ....
  29. Z

    Black cloth tape inside laptop

    here is what copper looks like under black tape its solid all the way through the heat sink....
  30. Z

    Black cloth tape inside laptop

    the whole heat piet sits right over the vent holes, any heatsink fins would point directly at them, they are really tiny though. It looks as if the only real air is pulled through the tiny holes by the single fan on the far left. the Cpu is the farthest thing and only thing that the heatsink...
  31. Z

    Black cloth tape inside laptop

    You have always been a pretty smart guy. Im sending a pic This is sort of what the I5 heat pipe look like except the fan is actually separate. Anyhoo you see the number 3 with the four screws over the cpu? well that a has a copper piece there. I'm just thinking of putting another copper...
  32. Z

    Black cloth tape inside laptop

    come to think of it, it is over the intake holes for air intake although they are too small for anyone to see through, I did remove it though and fan did get louder....
  33. Z

    Black cloth tape inside laptop

    My little I5 laptop has a 1.5 strip of black cloth like material minimally attached to the heatpipe. It goes the length of the pipe up to the exhaust fan. Partially adhesive on the sides also partially covers the metal memory shield. Is this supposed to trap heat in the heatpipe or insulate the...
  34. Z

    single and dual bank in laptops

    I did all that if you check my posts... Its got to be something related to the rank thing. I originally bought the 3200 16 gb for my Zephrus G14 which has one single rank 8GB soldered on board with another single rank on a upgradable second slot. I knew installing the 3200 16gb would create a...
  35. Z

    single and dual bank in laptops

    Now I do have two 8GB samsung modules with a 1RX8 on the label, which according to google articles means it is single rank, Now will these two in dual channel give me full speed or will the single rank of both slow the perfomance down?
  36. Z

    single and dual bank in laptops

    heres a flex memory link https://serverfault.com/questions/912283/can-mixing-ram-memory-size-on-its-own-reduce-dual-channel-performance/912298?fbclid=IwAR15cKYw5ifhGbVa9GxywBEdw-AKX7MnehYgZsvZq_ZDhAChxD_k6RwtXeE
  37. Z

    single and dual bank in laptops

    This whole thing sort of sounds like if you mix single and dual rank with the two sodimm sockets you sort of create a flex memory situation though not quite as bad......
  38. Z

    single and dual bank in laptops

    the crucial was 3200 CL 17, dual bank, pny was 2666 CL19 single bank
Top