Search results

  1. N

    SideArmD SA4 case, CNC + AIO + 9.35L

    That's too bad. I was really looking forward to it. Any chance a handle attachment could be made for the M1? Otherwise my only other choice would be the ss ML08-H
  2. N

    SideArmD SA4 case, CNC + AIO + 9.35L

    That's fair enough and a decent compromise. From the pictures it looks like the fans will occupy the space right up to the bottom section and the filters just under it. Will the filters be magnetic or one of those on a sliding rail? What if the bottom half of the air version didn't have the...
  3. N

    SideArmD SA4 case, CNC + AIO + 9.35L

    Thanks for the detailed pics. I think it should have solid detachable handle so it could be an option that people choose. I hope you'll reconsider SFX because of the availability and the lower fan noise. I think this layout will only benefit reference gpus with the air intake at the end since...
  4. N

    SideArmD SA4 case, CNC + AIO + 9.35L

    The handle is a must for me, otherwise there's no reason for me to get this case. Will the vented top panel be able to support the weight? I would prefer SFX over FlexATX. A decent flexATX would be hard for me to get. Nice idea with the bottom intake. How much gap between gpu and back of...
  5. N

    SideArmD SA4 case, CNC + AIO + 9.35L

    Here's a very quick sketch of what I had in mind. I feel like the top section is too thick and the 'handle negative area' was too large. The dip should be around the same as the early design. Dual 92mm fans at the top, layout is the same. (this is only my suggestion)
  6. N

    SideArmD SA4 case, CNC + AIO + 9.35L

    A case with a handle? I'm interested :). I'm the one clamoring for handles :D Especially if its below $160 w/ riser. I think it would look better if the part with the handle is the bottom and when you want to carry it, you flip it over. (sortof like the inwin chopin)
  7. N

    CCD MI-6: Performance in a 6.7L MIcrotower

    It shouldn't be hard to do, just an addition 1cm at both ends and bend 90 degrees. That's similar to my plan as well, but I think you'll need the molex cable as well. If the gpu doesn't have pci-e power connectors, the ribbon riser might not be able to power the gpu. You'll need a molex...
  8. N

    CCD MI-6: Performance in a 6.7L MIcrotower

    I'm definitely interested in a 2nd run if the cover has the lip/flange and costs <USD200 including shipping. (I'm not in US) If you could add the lip/flanges to the bottom cover, it would make adding a handle alot easier. All i would need to do is enlarge 2 holes at the top and screw in a...
  9. N

    Silverstone SX700-LPT 700W Platinum SFX-L

    I'm actually surprised that people want this more than a 300W/450W fanless 80+ Platinum SFX/L PSU. 700W would only be needed for dual gpus or sli/crossfirex and not many sff cases support that. Hope Silverstone has more announcements at computex
  10. N

    Silverstone Sugo SG13 Mini-ITX

    source: http://blog.livedoor.jp/bluejay01-review/archives/cat_182092.html http://2ch.hork.info/res/anago.2ch.sc/jisaku/1411222450 found a new pic of whats behind the colored front panels and what it looks like with a thick and thin CLC. I'm not sure what the small lip sticking out at the...
  11. N

    Silverstone Sugo SG13 Mini-ITX

    keep in mind I already have the SG05 so this would just be a new case to play with. Also, I'm basing my thoughts on the case shown in computex and not the pics posted by vipz) $30 - will be an instant buy (even if it's the ugly one shown in June) $35 - will think about it, and then buy...
  12. N

    Silverstone SX500-LG 500W Gold SFX-L

    Thanks for keeping us updated. I appreciate what you're doing. I have a ST45SF-G and the 300W FSP included in the SG05, and this is just my opinion. I don't expect complete silence. I think the fan noise with the 300W FSP is acceptable (although I wouldn't complain if it is quieter). I have...
  13. N

    Silverstone SST-SX600-G 600w Gold SFX

    Mainly the same reason as the others. I'm currently only using just over 200watts with my ST45SF-G and hopefully the lower wattage versions will be cheaper. If they're taking this long does that mean its a new design and not just a tweaked enhance unit as in the existing SFX units? I...
  14. N

    Silverstone SST-SX600-G 600w Gold SFX

    I'm waiting for the SX500-LG as well, or a 300-450W SFX-L version to replace my ST45SF-G. What about the SG13? Any news on that?
  15. N

    Silverstone Modular 450W SFX (ST45SF-G) - Now has a product page - NextQ = When?

    That's a bit disappointing since I got the 1.0 version. Might as well wait for the next model then. Make sure the next one has modular connectors that are easier to plug/unplug and include modular cables with only 1 connector, and obviously a quieter fan.
  16. N

    The OFFICIAL post pics of your SFF thread...

    Here's mine. Swapped the i5 for a low heat Pentium G620 Zotac H61 itx 2x 4G Kingston Low profile ram Corsair H60 Silverstone ST45SF-G ASUS GTX 460 1gb
  17. N

    Silverstone Modular 450W SFX (ST45SF-G) - Now has a product page - NextQ = When?

    That's great news! but what about the owners with a 1.0 or a 1.1 unit? Can we RMA through a local distributor or are the early adopters out of luck and have to buy a new one? The fan noise is very annoying since it's the noisiest component of my sff system.
Back
Top