Search results

  1. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Sooooo are the motherboard standoffs replaceable? I can't get the screws to go in AT ALL. Even without a board, just screwing the screws directly into the standoffs.
  2. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Well, two screws because dual-bracket. But that's true, you wouldn't get any support for the card from it sitting inside the PCIe slot. Although I suppose all that would cause is extra sag on the card. Which doesn't REALLY matter because that's basically a cosmetic problem. It doesn't affect...
  3. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I just found this as well. It's prettier, but might actually be too long. http://www.moddiy.com/products/Premium-Gold-Plated-16x-PCI%252dE-Extension-Shielded-Cable-Riser-%2819cm%29.html
  4. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I gather that you're saying I have to email them to order something? You didn't say, so I'm assuming. Would this be the one I need? http://www.ameri-rack.com/ARC1-021-Cx_m.html edit: and what length? I really appreciate the link, thank you. :)
  5. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Does anyone have a direct link to purchase a PCIe riser card for putting a blower-style GPU in the bottom of the M1? I can't seem to find them for sale anywhere.
  6. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Where can I get the PCIe ribbon cable I keep seeing people use for their builds?
  7. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Nope, it's a brand new board right out the box. Sure I'll give it a look when I get home from work tonight.
  8. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I don't know if it was, but there's no way I caused the amount of pressure it would take to warp it like that. The standoffs as far as I can see are fine. And yeah, that is an Intel stock cooler. I guess I'll try an RMA then.
  9. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    A continuation of these posts: http://hardforum.com/showpost.php?p=1041433915&postcount=15633 http://hardforum.com/showpost.php?p=1041433917&postcount=15634 http://hardforum.com/showpost.php?p=1041433921&postcount=15635 http://hardforum.com/showpost.php?p=1041433924&postcount=15636...
  10. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Also, do you know what fitting is on the left side of the CPU block in this image? https://i.imgur.com/v74WI8bl.jpg It kinda looks like this one: a combination of BP-BS90R2LCPF-CC2 and BP-BSWP-C41J
  11. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I'm pretty sure you got it spot on, thanks! :D
  12. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    That doesn't seem right, are you sure? Look at the fitting ends that connect the two fittings on the CPU side. That middle fitting doesn't look like the same connector on both sides. The side that connects to the CPU fitting looks twice as long.
  13. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Also, does anyone know what combination of Bitspower fittings are used in this image to connect the GPU and CPU blocks? https://i.imgur.com/NJnaRtel.jpg It looks kinda like one of these...
  14. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I'm using a 980 with EK water block. So I'll absolutely have to use the Aquacomputer block, and it will absolutely fit?
  15. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Which of these pump tops for a DDC pump do you guys think would be better? http://www.aquatuning.us/water-cooling/pumps/laing-ddc/ddc-tops/7006/aquacomputer-aquacover-ddc-cover-for-laing-and-swiftech-pumps-g1/4...
  16. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I eventually managed to get it in, thanks for the help.
  17. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I tried to get my sister to help, but I still can't seem to screw them it. The threads refuse to make contact for some reason, and I assumed it's because I can't get them to line up properly.
  18. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I'm trying to build in my M1 V3 with a Maximus VII Impact, and I can't for the life of me get the standoffs to lineup with the screw spots, I have to push really hard because of the padding on the I/O shield. Has anyone had to tear off the padding from the I/O shield to get the standoffs to...
  19. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Sorry to burst your bubble... but the Kelvin S24 isn't coming to the US last I heard. And I heard that directly from Fractal Josh.
  20. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Yeah the Windforce ones. I mean that's all they have besides their reference. And yes, EK does have blocks for all current 980 Gigabyte and MSI cards, as well as Asus's Strix and ROG Platinum cards.
  21. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Ah alright, I'll go with MSI then just to be safe.
  22. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Wonderful! How about any of the Gigabyte cards? Just to look at all my options.
  23. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Oh I see... Well totally flying in the face of what you just said, would ANY nonreference card fit in the M1 with an EK block?
  24. G

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I just want to double check. A 980/970 Strix with an EK water block WON'T fit in the M1, correct? Due to the PCB being too long to fit the side panel on?
  25. G

    Silverstone SX500-LG 500W Gold SFX-L

    Heads up everyone, I got an email back from Ryan Marinette at PCPartpicker letting me know he added the SX500-LG to the site, here's the link: http://pcpartpicker.com/part/silverstone-power-supply-sstsx500lg
  26. G

    Silverstone SX500-LG 500W Gold SFX-L

    I just thought I'd post that I got an updated delivery date for the order I placed on the SX500-LG from Amazon. That being February 18 to March 3, and that's with Prime 2-day shipping.
Back
Top