Search results

  1. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I have the same cooler but it is 4670K running at 4.4GHz and with heavy load it stays below 75oC. Are you doing a huge o/c? Btw: with low load I set this fan to run at 300 rpm. (very low noise)
  2. P

    NCASE M1 v3 Build Thread

    Is there any space to air circulate with strix?
  3. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Nice album and build! Congratz
  4. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    It is model NH-C12P SE14 (now discontinued). It uses 140mm fan. EpicFruit, later I´m going to upload some other photos.
  5. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    After a long time it was time to clean and rebuild: good oportunity to try ducts. Tip to new comers: New GPU will be blower style. It is complicated to redirect hot air inside this case. New rebuild: With ducts: Old but gold: With ducts GPU is not heating MOBO/CPU/PSU so much...
  6. P

    Severe Humming/Interference only through Onboard Audio

    Is it an asus ROG motherboard? I fixed this issue with bios update.
  7. P

    2.1 suggestions

    I have never tried klipsch, but I have z623. They are just "ok", not balanced. Good bass, but not clear voice. (perhaps lack of tweeter). This was the best (not DIY) 2.1 on my local market, but I was expecting better sound.
  8. P

    NCASE M1 v2 Build Thread

    Great building record. Congratz! Your build seems very clean and tidy (Tks to translate.google.com to open it too :cool: ) How about noise/temperatures? And where did you get the covers for the holes on the motherboard?
  9. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I was searching about ducts inside M1 and want to know how you guys have done it. Did you have good results in terms of temperature and noise? I´m concerned about ATX PSU and GPU getting unnecessary hot air. Having to spin too fast to cool them. Some ages ago I tried 2 fans at the bottom...
  10. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I´m using impact VI. Audio quality gets better after bios update and driver update. At least for me. Early versions of bios / drivers were causing audio noise
  11. P

    Silverstone SST-SX600-G 600w Gold SFX

    I´m using an ATX one from be quiet (SP7 - 500w) on my ncase. It runs well, at least no coil whine as my other ones from coolermaster and corsair. I havent tested sfx from silverstone or bequiet. One important point is to check who is the manufacturer behind brands. There is a "non oficial" list...
  12. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    It is a open-style GPU, but you are right, I´m using 1 120mm on the left and 1 92mm on the right
  13. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    It was a good idea to use demcifilter. 8 months since last cleaning :D
  14. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Cheap solution -> Use an eraser :D It works like a charm
  15. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    If GTX780TIDC2OC3GD5 is the same size or bigger than the Asus DirectCU II OC R9 280x certainly will not fit
  16. P

    3 Slot "MATX" motherboard in Ncase M1

    "Default" microATX have 4 slots ( ref: http://www.formfactors.org/developer/specs/matxspe1.2.pdf )
  17. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I have one 120mm and another 92mm from noctua but they are not slim. I just use fan speed from mobo to make them very quiet on idle. But from my tests even with both fans at 100% I just get around 2 degrees less on my GPU. So I don´t think it worth for me. I just still using it because I already...
  18. P

    NCASE M1 version changelog and suggestions thread

    I´m happy with my one. I´m not planning to buy another M1 for now. I'm contributing with a suggestion that does not change the case size. Have you tried "printing out a 3D file"? I have never tried. I heard it takes hours to finish and costs a lot every small pieces ok Thanks for the...
  19. P

    NCASE M1 version changelog and suggestions thread

    Quote from another topic: It seems to be good start. If someone is using option on the right (slots 2 and 3 only) probably they will have a long GPU so there is no problem with awkward gap of the expansion slot. But I dont know yet how to solve "natural looking" in top gap (with slots...
  20. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    One suggestion for rev2: check if feasible to allow move motherboard down. So we can choose to use 3 slots or just slots 2 and 3. Main reason: allow modular atx psu with long (not so long) gpu This flexibility may allow to have gpu getting fresh air from bottom without extra fans and may...
  21. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    If you are not using ODD you can put 2 ssds there
  22. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I´m using PNY 770. It is quiet if fans are running up to 60% of max speed. My biggest (noise) problem was PSU (atx one). It was doing a lot of noise when powering GPU. I have changed my old PSU from coolermaster to be quiet! and now my M1 is running very quiet.
  23. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I have "printed" (paper and cut edges) and tried to fit on my impact board. In my test it didn´t fit
  24. P

    ASUS MAXIMUS VI IMPACT

    There is a new: BIOS updater for New 4th Gen Intel Core Processors Has anyone tried? It seems strange its size. It is half size of other versions. http://support.asus.com/Download.aspx?SLanguage=en&m=MAXIMUS+VI+IMPACT&p=1&s=45
  25. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I have changed my ATX PSU to: be quiet! System Power 7 (500w). Power cable orientation fits OK on M1. This psu is very low noise and doesn´t spreed much heat on M1 front cover. When gaming it makes much less noise than my GPU. Another good point is that my audio output from Asus IMPACT...
  26. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    In my M1 I´m using PNY 770 GTX without problem. I just had this coil whine with Corsair CX500, so I´m temporarly using one from Coolermaster until I get a new one from ebay.
  27. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    It seems your GPU PCB in pending down near power connector. Maybe if you put if totally horizontal it will have better air flow
  28. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Thanks for the pictures. Just ordered mine :)
  29. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Thanks. If I change my PSU to seasonic I will try something like this or try to invert psu connector (breaking warranty :( )
  30. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Do you have some pictures of it?
  31. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    It´s true :P At least i´m in a hunt for a good quality ATX PSU with low noise in heavy load. As someone mentioned: "noisepochondriac" BTW Nice build!
  32. P

    ASUS MAXIMUS VI IMPACT

    With last bios it seems a bit better sound output. There is less noise on it. Don´t know if it is coincidence
  33. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Is it ok 2 square and 1 retangular? Didn´t understand why to use 2 squares on side panel if you don´t have screws there
  34. P

    PSU squealing?

    My cx500 is having the same issue. I´m using an old one from coolermaster (not so good, but at least this CM is not squealing)
  35. P

    ASUS MAXIMUS VI IMPACT

    Last 2 times that I flashed my bios it forgot all my settings - including my array disc set. But after I change it keeps remember (fans included)
  36. P

    NCASE M1 picture and build general log

    Nice, but isn´t it blocking the sinal when front panel is closed?
  37. P

    What will your M1 build contain!?

    If your GPU is not compact you have to use SFX psu or ATX non modular up to 140mm lenght
  38. P

    Mini ITX - Ncase M1 with ATX PSU

    Before buy the PSU check if you are not going to have this problem: http://hardforum.com/showpost.php?p=1040418199&postcount=7913
  39. P

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Asus R9 280X DirectCU II OC won´t fit (just as reference)
Back
Top