Some fresh informations about Delock 62967 ... I bought 4 of them for my CRTs from Reichelt.de, unpacked one and tried it:
- With a HD5850 / Catalysts 14.12 I only get up to 1280*1024@85hz resolution and can't set anything higher with CRU
- With a R9 380X / Adrenalin 18.12.3 I get resolutions up to 1600x1200@60hz, and when I try setting standard resolutions for the FW900 (like 1920*1200@85hz), the screen keeps clicking, and display remains black most of the time with some sporadic images. On the top of that the system is more or less hanging, I have to unplug the adapter for this to stop.
I'll try a few more things but digging back in the thread, I guess I've fallen victim of their shit connector and I'll have to add some cable soldering job to my long list of things to do ...
AMD 5850 does not support HBR2 so even if the adapter was perfect it couldn't go over 180 MHz.
With 380X is another story and if it isn't stable with HBR2 the only solution is replace the cable or at least the connector.
About AMD cards and 62967 i tested 8 different samples, some with cable and connector different from the model on sale and only the first prototype works perfect, the other samples have problems with HBR2.
I have an additional adapter between the card and the 62967 because i have only mini displayport output, this degrades the signal even more, i never tested the new modified samples with direct displayport connection but pr0ton did it and the results were not good, he replaced the cable and it worked.
I also replaced the cable on one sample and it worked, even with a shitty solder job.
With Nvidia GTX 1070 all the samples work perfectly, i can also touch and move the connector while it is running without problems on the image.
Last edited: