25 liter plexi case for 12x GPU PC

baskobar

n00b
Joined
Jan 27, 2016
Messages
16
PC was build 2-3 months ago but without case
look like this:

https://abload.de/img/tn_30232705_1021442289zpas.jpg

I want to build small mining case, which looks good, take less space, its silent and also will work as little heater at winter.

List of thing which was done:
- custom design of case for 12x gpu without i/o brackets - 35m spacers betwen them
- plexi was laser cut and aluminium cut and drill on manual lathe
- I have to buy 24 risers in total bcoz narrow008c are sold with thick usb cable which was not good for cable managment also have bigger bend radius, so i bought 008c and also 006 regular ones with thin usb cable so i can mix them and use 008c with thin cables
- custom lenght 8PIN from PSU to 4x 6pin riser cables for power
- custom lenght 6pin from PSU to 4pin EPS
- stock fans and i/o metal bracket from gpus was removed (8-9screws each) 100screws total (stock heatsink not intact
- custom laser cut mount for ssd
- ssd is powered from internal SSD pins with custom cable - internal 4pin(2pin use) to sata plug
- fan voltage regulator - LM2596 voltage regulator + 1 @ 5fan 4 pin splitter


TO DO LIST
- side panels
- shorter 24pin cable


Specs:
case: 3mm plexi + 10x10alu profiles - 234x228x476mm - 25,5 liter
fans: delta 92mm 0,6A each @ 8,5-9V
fan controller - LM2596
motherboard - chinese B250C BTC
cpu - pentium G4400
ram - 8gb corsair
ssd - intel 120gb
gpu - kfa2 gtx1050ti
risers - 008c narrow
psu - seasonic(LDLC) platnium 750W
power consumption from wall - 660W
speed - 188mhash @ 660W



tn_img_5700qcsrx.jpg


tn_img_5701zrsxf.jpg


tn_img_5702y4swf.jpg


tn_img_5703ugsj0.jpg


tn_img_56995hsxg.jpg


tn_img_5698rmstf.jpg


tn_30232514_102144210ogsey.jpg
 
That thing looks sweet as hell. What GPUs are they?

Edit
Nevermind. 1050Ti
 
next one in progress - almost the same dimensions (only change is +1,5cm to width) but will fit 12x rx570 pulse ITX O______O

more you can check on facebook page under VMCszczur
 
Last edited:
people still GPU mine?

This setup looks nice!

Sure. Still almost doubling my electric bill. Not quite the ~x5 figure it was earlier this year, but yeah.

Most folks don't count in for the times that some of the algos go crazy, like Lyra2REv2 yesterday. I was almost ~.02 /d for a good several hours. Crypotonite v7/Heavy will pop off like that at times too.

While your typical 'high water' profitability mark isn't usually that long a duration (someone's buy bot going crazy?), it can be counted upon enough that your typical haul is higher than what any calculator will tell you.
 
Sure. Still almost doubling my electric bill. Not quite the ~x5 figure it was earlier this year, but yeah.

Most folks don't count in for the times that some of the algos go crazy, like Lyra2REv2 yesterday. I was almost ~.02 /d for a good several hours. Crypotonite v7/Heavy will pop off like that at times too.

While your typical 'high water' profitability mark isn't usually that long a duration (someone's buy bot going crazy?), it can be counted upon enough that your typical haul is higher than what any calculator will tell you.

Yeah when this happens i figure they are testing for 51% attack or some other crazy shit. why else would the bids go up so high. makes me suspicious anyways
 
custom 2 wire cable for pci-e + riser power

its 1mm electrical cable (rx570 consume less than 4A from riser, and less than 6A from pci-e 6pin socket)

is it safe? why not - for comparasion AWG18 which is 0,82mm is rated 10A max, here i have 1mm and its use half of current)


working for 12hours already (wire isnt even warm)

123atstp.jpg
 
Back
Top