Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have the 3d printed delid tool and it works fine, but I want to use the rock it tool or something that will help with the relid on my next project. Last project suffered from improper lid seating and want to use the proper tool this time.
deliding isn't the issue for me. Did several already. Problem I have most is getting a good lid mount. That is the issue and why I want a proper tool this time instead of trying the various methods to mount lid with clamps etc....
my attempts were better than stock tim, but not what they could have been if I had a proper tool. I agree with Kyle in his/HardOCP article about delidding etc... about getting the right/correct relid is paramount. Why I'll try to get the proper tool this time. Just trying to save some $$
I looked around for a while, but I ended up just sending mine out to SL to delid/relid. But if you're looking to upgrade a lot, might be worth just buying one.
I need to get one.well the temp drops are REAL. Before delid I couldn't run AVX at 4.8ghz w/out breaking 80C++++. That was either Prime 95 or OCCT. Now MAX is 65C and usually in high 50's or low 60's.
Sadly, max oc doesn't seem to have improved. I can run non avx at 5ghz and avx at 4.8ghz. Was hoping to clear 5.1-5.2ghz. I can however run 4.8ghz at 1.315v in bios and that's now what I'm running. 5.0ghz needs 1.3675v and I don't really see the gains in my apps to justify the vcore offset. Happy with the temps. Now I want a 8700k
What lengths people have to go to, in order to avoid thermal nuclear fission, I remember the days when you could use a stock fan and it would be sufficient for all standard operations.