No Hands 55
Limp Gawd
- Joined
- Nov 4, 2014
- Messages
- 179
anyone that ordered just the fan bracket get tracking or receive it yet? i havent heard anything since the email that said tracking should be in by the 24th
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yep, but the tracking numer was "MAIL", most likely meaning it's untrackable air or surface mail.
That's probably the fastest build one can put in the M1 and it fits "easily" too ! Nice one !Got my v4, and put two AIO coolers in it.
Got my v4, and put two AIO coolers in it.
So how much clearance is there with a Silverstone 500 Sfx-l and a full length card? Especially one with a backplate?
Are there any replacement cables with a smaller profile?
Which GTX 970 should i purchase for the ncase v3?
To my understanding the Asus Strix won't fit inside without a "mod"
to the fans frame, (the plastic part). So, I was thinking perhaps
the 4GB MSI Version, (Gaming 4G Version) or perhaps EVGA SSO or FTW?
Or Perhaps just take the gigabyte mini itx?
Also, can i run the card with 450w PSU (silverstone).
My box is an i4770k, (no OC)' with 240GB Samsung Pro ssd and 16gb or ram.
Thanks.
If I was in the market for a 970, I would probably go with the iChill from Inno3D, atleast if you have a spot to mount the 120mm rad. A card as cool as the 970 should really thrive in a tight space with watercooling.
Is there any space between the PSU and the Motherboard where I can fit the 24-pin ATX power cable?
Got my v4, and put two AIO coolers in it.
If the cable is flat, yes.
Got my v4, and put two AIO coolers in it.
The dust filter on the fan bracket is nice, but my radiator screws make it bulge a little bit. Are there dust filters for the other case holes? Do these fit the v4? http://www.demcifilter.com/c220/NCASE-M1.aspx
Nice build. Weren't these filters intended for intake rather than exhaust though?
nice build! what sort of temps do you get on the i7 (clockspeed/volts etc) with a slim 120mm rad and single fan? i have a an i7 3820 im planning to OC (via BLCK) and the old h100 that came attached to it is getting pretty worn. wondering how viable a 120mm rad is for a high tdp cpu.
Is it a really bad idea to use an open fan (after market) 980 ti with the M1, like an EVGA 980ti with ACX 2.0?
My fans are set for intake (they're set to pull)
Which GTX 970 should i purchase for the ncase v3?
To my understanding the Asus Strix won't fit inside without a "mod"
to the fans frame, (the plastic part). So, I was thinking perhaps
the 4GB MSI Version, (Gaming 4G Version) or perhaps EVGA SSO or FTW?
Or Perhaps just take the gigabyte mini itx?
Also, can i run the card with 450w PSU (silverstone).
My box is an i4770k, (no OC)' with 240GB Samsung Pro ssd and 16gb or ram.
Thanks.
ne1?
Have you tried outtake? Are there any temp differences?
I would rather have them push warm air outside, instead of pushing it inside the case
If the current status of my order is "inbound out of customs" does that mean it is still in customs? If so, it has been there for five days now.
I hate to be a nag but i'm very frustrated with this shipping. I know it is not NCASE fault for shipping to take forever, but dam....I was really upset knowing that I ordered my V3 just one month before the V4 was announced (missed out on some filters) and I am finding out now that people are receiving the V4 before my V3 even leaves Taiwan? My packaged was shipped on May 21st. The most updated status on June 5th says "Processed Through Sort Facility, location Keelung, Taiwan.". I contacted support and they instructed to wait till the end of the month to ask again. I just need to vent a little. I've had my PC sitting on my desk with no home for a month already
I bet its those darn Somalia pirates holding my case hostage.
It sounds like you chose surface shipping? That does take a long time - up to 10 weeks from the ship date, not including customs processing in your country. You're at about 9 and a half weeks now, so it hopefully won't be too much longer.My packaged was shipped on May 21st. The most updated status on June 5th says "Processed Through Sort Facility, location Keelung, Taiwan."
It's not possible for surface shipped v4s to have arrived in the US yet. Either there was a mistake in the spreadsheet entries (e.g., choosing surface instead of SAL), or it was shipped by SAL or air for some other reason.I've been tracking quite a few of the V4 owners and most of them all shipped out on the 15-16th and arrived at people's locations (even the one that says they used TW Surface when they are located in the eastern US; that is suppose to be a 4+ week delivery).
When did you order? W360 started submitting orders placed earlier (i.e., in June) to TWPS a few days before the 15th so they could get started. So if you ordered closer to the 15th, your order would be shipped a bit later.Mine has been stuck at "processed through sort facility" in Taiwan since the morning of the 22nd (I paid for TW Air). This morning it finally hit "preparing for shipment" but that was at like 2AM EST.
Impressive build, evera. I'm considering doing something quite similar, but have a few questions. Any chance you could comment?
1) How is the noise? I'd also like to fit an overclocked 5XXX processor and a powerful card in mine, but I was afraid that two AIOs might be quite loud. This is my primary concern, and the only one really holding me back from pulling the trigger. I'm much less concerned about the load noise than idle / startup.
2) How difficult was it to squeeze everything in and route the tubes? At least from your photos, it looks like you were able to fit everything in rather neatly. No problems with the two rads side by side on the bracket?
3) How are you doing airflow? Do you have both of the rads doing intake, and if so, are your temps okay?
Any comments you could provide would be greatly appreciated. Congrats!
When did you order? W360 started submitting orders placed earlier (i.e., in June) to TWPS a few days before the 15th so they could get started. So if you ordered closer to the 15th, your order would be shipped a bit later.
The noise is mostly the noisy pump in my 980 ti hybrid right now... I'll get back to you on this when I get my new GPU.
I haven't stress tested it yet, but temps seem OK so far... I'll update more once I replace my GPU.
If you mount an SFX-L power supply sideways and against the front wall of the case, will there be enough space for cable routing with a full length gpu?
Cable routing to where?