Hey there, I am working on a new scratch build named "Venus". I started gathering parts and pieces about a month ago and finally have some pictures and video to show you.
I chose the name because both Venus and Copper have the same Alchemy symbol and there is sort of a relation there. Also Venus is the Goddess of beauty. I am hoping this creation of mine which is a total scratch build will be beautiful.
The whole case frame is being made out of 1" copper pipe and fittings. All the 1" copper pipe will be polished to a mirror finish and then sealed to prevent the copper from discoloring. All the panels will be made out of 1/4 aluminum sheet that will be powder coated candy apple red. All the watercooling lines inside will be hard copper lines polished as well. There are going to be other copper highlights too throughout the case.
I have a few sponsors to thank before I start uploading pictures.
First of all I would like to thank Enermax for providing 26 UCUR12-R fans and 2 EMR1500EWT 1500 Watt power supplies.
Club3D is the next sponsor I would like to thank for providing me with 2 295X2's.
https://www.flickr.com/photos/127934078@N02/15767358725/in/photostream/
Hardware once its nailed down will be detailed here.
Here are a few preview pictures and video of what I have so far.
https://www.flickr.com/photos/127934078@N02/15763715072/in/photostream/
This next picture is going to be one of the two front pillars which will have a water bubbler in each and will not be a part of the watercooling loop. Basically its just for show. There will be identical reservoirs inside the case that will be a part of the loop.
https://www.flickr.com/photos/127934078@N02/15543985667/in/photostream/
You can scroll through my other pictures to see the rest. Ill post updates as I go along.
Here is a short video I made of the water bubbler that will be in the front 2 pillars in the front of the case.
http://youtu.be/XuMlrUaEGAc
I chose the name because both Venus and Copper have the same Alchemy symbol and there is sort of a relation there. Also Venus is the Goddess of beauty. I am hoping this creation of mine which is a total scratch build will be beautiful.
The whole case frame is being made out of 1" copper pipe and fittings. All the 1" copper pipe will be polished to a mirror finish and then sealed to prevent the copper from discoloring. All the panels will be made out of 1/4 aluminum sheet that will be powder coated candy apple red. All the watercooling lines inside will be hard copper lines polished as well. There are going to be other copper highlights too throughout the case.
I have a few sponsors to thank before I start uploading pictures.
First of all I would like to thank Enermax for providing 26 UCUR12-R fans and 2 EMR1500EWT 1500 Watt power supplies.
Club3D is the next sponsor I would like to thank for providing me with 2 295X2's.
https://www.flickr.com/photos/127934078@N02/15767358725/in/photostream/
Hardware once its nailed down will be detailed here.
Here are a few preview pictures and video of what I have so far.
https://www.flickr.com/photos/127934078@N02/15763715072/in/photostream/
This next picture is going to be one of the two front pillars which will have a water bubbler in each and will not be a part of the watercooling loop. Basically its just for show. There will be identical reservoirs inside the case that will be a part of the loop.
https://www.flickr.com/photos/127934078@N02/15543985667/in/photostream/
You can scroll through my other pictures to see the rest. Ill post updates as I go along.
Here is a short video I made of the water bubbler that will be in the front 2 pillars in the front of the case.
http://youtu.be/XuMlrUaEGAc