Stealth American --World's Smallest Watercooled Full PC>>>UPDATE 1

usrebmot

n00b
Joined
Feb 9, 2011
Messages
26
The Stealth American is the world's smallest full featured computer while maintaining a full liquid cooling system.

Case -> Silverstone Sugo 05 (Smallest full GPU case on the market)

Challenge -> The purpose of this case mod was the create a PC that had the entire functions of a full tower case. This required both 2.5 and 3.5 hard drives, a full sized GPU with a PSU to power it, adequate cooling for the CPU and GPU, while still maintaining sufficent airflow for the radiators. All the above was to be fitted into the smallest commercially available case with 2 PCI slots. (as of newegg june 2011). At 658.3 cubic inches or .38cubic feet, it is smaller than most stereo speakers, and is about the size of a gallon of milk or a 12-pack soda (or beer, whatever floats your boat).




Parts list is as follows
  1. ASRock Itx Motherboard HT
  2. Intel 2500K
  3. Full GPU (undecided, working with a 560ti)
  4. 2x 3.5 hard drives.
  5. up to 4x SSDs
  6. Full ATX Silverstone 600W PSU
  7. HWLabs 120 GTStealth
  8. Swiftech Apogee XT waterblock
  9. Swiftech 355 pump
  10. Swiftech 355x top
  11. Swiftech Microres
  12. either 1x Feser triebwerk or 2x any other 120mm fans in push pull.
  13. intergated 5.25 fan controller
  14. Bitspower of course
    001_tongue.gif
I hope I got everything :)
All while leaving space for a slim dvd/blu drive and a Silverstone OEM card reader.



Full featured means
  • pump->block->rad->res
  • Push pull for rad
  • 2SSDs in RAID
  • at least 1 3.5 for storage.
  • Disk drive and card reader
  • Full sized GPU
Worklog Contents (preplanned will add extra things if needed)
  1. Parts parts and more parts. >unpacking
  2. Layout is fun and boring >Various layouts
  3. Kiss my feet >case feet
  4. Fix my face >front panel work
  5. Can you say 6TB? >hard drive placement
  6. SSD super small drives >SSD placement
  7. This is too cool >radiator testing
  8. To the left! >radiator placement
  9. Veni vidi vivox (I came I saw I powered) >powersupply modding and placement
  10. In with the old >controller rewireing with pata cables :)
  11. Pinnacle, peak, summit, apex, zenith, Apogee! >block instalation
  12. Off with its....wing >space for larger GPU
  13. Pump this up >pump placement and instalation
  14. It doesent hold water! >res installation and problems ;( -no not leaks...of course not
  15. Bling Bling >paint and gloss
  16. finaltouches >cables lights and whatever
  17. the paparazzi flashes > photo time
Only half way done but this is the roadmap.

I could use a better name so suggestions are welcome.

Comparison to 'Mini-me'
To clarify because some people are wondering
and as I said, this is a full computer, in the smallest space possible.
And for the record I think that oliverw92's work is incredible, and I wouldnt have even thought of this if I didnt see Mini-me. I went as far as to copy the entire photos directory after the links broke on his forum posts.

Stealth A. Mini Me
Full size GPU (580) half sized
Full WC loop (pump,res,block,rad) closed block/pump loop
Push pull 2fans 1 fan-external one on magazine.
600W ATX 250W SFX
4 or 2x2.5ssd and 2x3.5hdd 2x2.5 ssd
Card reader metal feet

Link to Mini Me And for those who want to see I've included a zipped version of the pics @ socal-mods.com/modimg/minime.zip
 
Last edited:
Nice :D the SG05/SG06 is a beastly little case. OCN's WC club still rated oliver92's minime as "smaller" than a SG06, however. So... :p Subbed :D (hopefully I'm not breaking up a post chain for your worklog, here).

EDIT: also, the nexus Compact 630W may be better suited for your PSU :)
 
Part 1-Parts


IMG_8477.jpg


IMG_8684.jpg


IMG_8688.jpg


IMG_8689.jpg




IMG_8742.jpg


IMG_8745.jpg


IMG_8746.jpg


IMG_8747.jpg


IMG_8749.jpg


IMG_8750.jpg


IMG_8751.jpg






IMG_8759.jpg


IMG_8760.jpg


IMG_8761.jpg




IMG_8763.jpg


IMG_8768.jpg


IMG_8808.jpg


IMG_8905.jpg


IMG_8906.jpg


IMG_8907.jpg


IMG_8922.jpg


IMG_8928.jpg


IMG_0077.jpg


IMG_8145.jpg


IMG_8463.jpg


IMG_8464.jpg


IMG_8465.jpg


IMG_8466.jpg


IMG_8467.jpg


IMG_8468.jpg


IMG_8469.jpg


IMG_8470.jpg


IMG_8471.jpg


IMG_8473.jpg


IMG_8472.jpg


IMG_8474.jpg

Back panel sprayed black
IMG_8475.jpg


IMG_8476.jpg



* This Worklog post was generated using WorklogCreator - Version: 1.0.1.7
 
Looks interesting. I'll have to follow this one as I did a watercooled SFF last year. Check my sig for the link. It may give you some ideas.
 
Front panel of the sugo
IMG_8500.jpg

back side
IMG_8493.jpg

PCB removed
IMG_8494.jpg

buttons removed
IMG_8495.jpg

after cooling it is leved off with a razor blade
IMG_8513.jpg


IMG_8514.jpg

primer
IMG_8515.jpg

primer smoothness check
IMG_8516.jpg


IMG_8517.jpg


IMG_8532.jpg

after sanding not too good,
change to gorila glue
IMG_8533.jpg

Gorilla glue begins
IMG_8779.jpg

after everything is filled in and sanded down
IMG_9247.jpg

closeup
IMG_9248.jpg

smoothness check
IMG_9249.jpg

front panel lightly sanded
IMG_9250.jpg

testing paint colors and my striping skillz
IMG_9252.jpg


IMG_9253.jpg

first primer coat
IMG_9258.jpg



* This Worklog post was generated using WorklogCreator - Version: 1.0.1.7
 
Last edited:
Very nice, What make is the fan with the golf ball dimples on it, Does it make it quieter?
 
it is a silverstone golf fan
it is insanly quiet, you cant hear anything
but it also moves almost no air :\
not that good for my build
 
Just curious why your typhoon looks much thicker once you mounted it in the case?
 
Gotta ask, why the unlocked cpu on a board that doesn't support overclocking?
 
I'm sure it's not the smallest.. but it's damn nice :) Good work.
 
Last edited:
The metal sheet for making the hard drive cage
IMG_9130.JPG

generally cut out
IMG_9125.JPG


IMG_9126.JPG

fine cutting
IMG_9127.JPG


IMG_9128.JPG

bent into shape to test for size
IMG_9129.JPG

size testing
IMG_9131.JPG

checking form
IMG_9132.JPG

hole placemnt
IMG_9134.JPG

rubber washers...not used in the end
IMG_9135.JPG

finding distance
IMG_9136.JPG

marking size of cage
IMG_9138.JPG

mounting hole drilling
IMG_9139.JPG


IMG_9142.JPG


IMG_9143.JPG

screwed in
IMG_9147.JPG


IMG_9148.JPG

prior to bolting onto PSU
IMG_9155.JPG

position
IMG_9156.JPG


IMG_9158.JPG

screws in place
IMG_9160.JPG

sawed down
IMG_9161.JPG

placemnt test
IMG_9162.JPG


IMG_9171.JPG


IMG_9174.JPG

Final form
IMG_9175.JPG



* This Worklog post was generated using WorklogCreator - Version: 1.0.1.7
 
Back
Top