Pics of my new Setup.

B

Boostage

Limp Gawd
Joined
Sep 25, 2008
Messages
327
Specs:
Quad Swiftech rad
Dual Swiftech rad
MCR655b
Xspc dual bay Reservoir
7 feet of 1/2 ID Tygon Tubing
Enzotech CPU,GPU and NB blocks
Chinese Ebay fans

Location: 80 degree South FLorida

Leak testing and bleeding
P1020043.jpg

P1020044.jpg


Foam from the Primochill utopia
P1020045.jpg


GPU
P1020046.jpg

P1020050.jpg

P1020049.jpg

P1020051.jpg


Temps on GPU(9800gtx) went from 43c Idle stock to now 29c Idle and 37c under full load this is at 860/2088/1329 So my fully loaded temps are lower than idle temps on stock Fan.and thats with a 122mhz overclock 3dmark06 score went up 742 points

CPU temps:

I have a c1 Q9550@ 4ghz
With a xigmatek s1283 and a Sythe Ultra KAZE 120x38mm 133cfm fan. idle temps were 40/42/42/42 Idle and 71c under full load

Now on the same overclock the temps are 38/42/42/42 Idle and Mid 50's under full load

Northbridge on my Asus p5q went from 39c to 31c.
 
I did a little googling and reading and it looks like it's just given off when it's killing whatever was already in there.
I hear it can be a real pain / nasty.

What is your opinion after using it?
 
Last edited:
The foam lasted less than 15 mins before it all turned clear as you can see in the lower pics.
 
If you made your tubing shorter on the bends and using 716 ID 5/8 OD (IDK if you are), you should be able to make those bends.
 
Looks cool man.

So could you have fit the triple rad, in the front where the 3 LED fans are? Just curious :D
 
I've never seen that many rads mounted externally lol. Nice job though. That's a nice 20 degree reduction under load.
 
You must log in or register to reply here.
Back
Top