![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
I just purchased a, eVGA GTX 285 and installed it in my Antec 900. I updated to the latest drivers, and everything is dandy on my 30" display. However, on my second monitor (a 24") the picture is shifted about five inches down and two to the left. The resolution is set to 1920x1200 for that monitor, but it does NOT appear to be as sharp as it was with my previous 8800 GTS 512.
I'm at a loss to fix this. My only thought is that, after observing the place where the DVI port physically meets the case and GPU, is that the connector is not able to seat all the way. Every other GPU I've seen in my life has always had ample room between the DVI ports and the metal bars that separate the PCI and PCIx slots, but this one is flush. I'm afraid that the DVI port is hitting the metal piece of the case before going all the way in.
Could this be causing my issue? If so, does this seem unusual to other 285 owners? I'd hate to RMA the card or cut away my case, but I'm at my wit's end now. Any insight or suggestions to fix my issues would be appreciated.
Thanks!
I'm at a loss to fix this. My only thought is that, after observing the place where the DVI port physically meets the case and GPU, is that the connector is not able to seat all the way. Every other GPU I've seen in my life has always had ample room between the DVI ports and the metal bars that separate the PCI and PCIx slots, but this one is flush. I'm afraid that the DVI port is hitting the metal piece of the case before going all the way in.
Could this be causing my issue? If so, does this seem unusual to other 285 owners? I'd hate to RMA the card or cut away my case, but I'm at my wit's end now. Any insight or suggestions to fix my issues would be appreciated.
Thanks!
