The Conroe Overclock Database. (Please read 1st post for posting instructions.)

Status
Not open for further replies.
famich said:
1.8V Core is really too much

BTW I ve noticed a quite large Vdroop on my "rev 2 " P5W DH DL -
in BIOS 1.525 means actually fluctuation between 1.472-1.488 . I was wondering why my CPU suddenly requires a bit more "juice " for the same clocks than before.

Completed 13H Orthos -OK @400x9

Anyone ?
Click to expand...
Crappy circuitry, crappy sensor? Isn't there a Vdroop mod around?

Holy crap, I might go home this weekend and try to push my server more. I guess the old "try to keep load temps under 50C" really means nothing with these new chips. 94C! :eek:
 
Mr. K6 said:
Crappy circuitry, crappy sensor? Isn't there a Vdroop mod around?

Holy crap, I might go home this weekend and try to push my server more. I guess the old "try to keep load temps under 50C" really means nothing with these new chips. 94C! :eek:
Click to expand...
Should hopefully have dead processor by tomorrow.

The temps are definitely wrong I would say that when it was on 94c it really was on about 65-70c , the HSF would be piping hot and even bottom of the board would be piping hot but it wasn't .Also I would start to see errors and would shut down on me but it kept on going .
 
My first stable OC.
oc.JPG


CPU name : E6400
OC: 3200
Stepping: 6 B2
Week: L628
Code: A791
Vcore: 1.36V
Cooling: Air
Cooler brand/model: Scythe Infinity
Motherboard: Gigabyte DS3
Bios Version: F6

RAM brand: Crucial
RAM rated speed: 800
RAM actual speed: 800MHz
Latency: 5-5-5-18
 
User Name: Blurp
Stability: > 10 hrs Orthos small fft's
CPU name : E6400
OC: 3400 MHz
Stepping: 6 B2
Week: L626
Code: A228
Vcore: 1.4625
Cooling: air
Cooler brand/model: Zalman 9500
Motherboard: Gigabyte GA-965P-DS3
Bios Version: F6
RAM brand: Mushkin
RAM rated speed: 6400
RAM actual speed: 850
Latency: 5-5-5-12 2.1v

Here are stable overclocks according to vcore:
vcore 1.3500 = 3200 MHz Coretemp = 57-59
vcore 1.4125 = 3336 MHz Coretemp = 63-64
vCore 1.4625 = 3400 MHz Coretemp = 65-66
So 3336 MHz and 3400 MHz are not worth for me since they exceede 60 C.

clip340004ps3.jpg
 
nooh said:
Looks like Sir mentok1982 has left us. :(
Click to expand...

No one has posted any overclocks recently. I will update today with the four that have been
submitted since my last update.
 
mentok1982 said:
No one has posted any overclocks recently. I will update today with the four that have been
submitted since my last update.
Click to expand...
Post no 600 sir. That is mine
:D
 
First of all, now you can dowload the database and play with it all you want! (Link removed, there
is a new link with the latest update.)


I am going to leave these here for a bit longer, maybe until I have time to do the sorts again.

I almost forgot! The colors in the below pics are used only to separate each motherboard
(or memory brand or CPU week) from the next. It does not mean the results are official or not.

Database sorted by memory brand:

conroememoryqq4.png


Database sorted by motherboard:

conroemotherbgg7.png


Database sorted by CPU week:

conroeweekis7.png
 
Haha! Very nice man! The DB you sent me proved very useful! Just curious, everytime you update the DB, will you provide an updated DL link?
 
nooh said:
no i like the ass just the way it is , nature is the way forward , good one , the leaderboard and not the ass.

I got banned at my first website I went in a forum in and learnt a lesson , that wasbe nice and god willingly no one will have fight with you , also its all talk and things to learn , i am not out there to proove anything , if i can help someone i will if i somebody gets offended then say sorry and move on.

Now if you check i have survived about 900posts and not banned yet. If i do get banned then i will remember that in my next forum i join and this time i have to beat 900 posts to be better than last time, sometime ass licking is the way forward.

LOL oh yaeh have a nice day :)

PS send you the link where i got banned and my last post. , will be a laugh read it , happened about 6 weeks ago.
Click to expand...

Remember thread 266 /\ /\ /\ Anyway I was talking about this guy which I had a tiff with in my first forum and then got banned, well anyway he passed away Wednesday morning , his name was GE007 or Grant Embling from http://cpcff.co.uk

Man I am in shock , life is so short.
 
nooh said:
goto www.custompc.co.uk >Forums >custom pc>to everyone that i have offended.

Its on page 6 , also all the lock threads on that page , i was bullied and i was wreckless , also didnt know how forums worked , was the first forum and lasted about week before i got banned.

Once bitten , twice a shy. I behave now and can laugh at all that happened , there was this guy there who opened a thread behind my back and ganged up onme , also because they were old and helped with things they banned me, I still buy there magazines and still think they are great and i should have controlled my anger and temper, also my name is nooh and the guy threatened me said that i will tell all the forums what you are like, luckily he did not come here.LOL. or i would have been banned before it even started.

Still i sign up as nooh everywhere , why ? so i can remember it.

Everybody have a nice day :p
Click to expand...
Thats the other bit I wrote after that.

I wish i knew him a bit better and we could have sorted our differences out.
:(
 
jnick said:
Haha! Very nice man! The DB you sent me proved very useful! Just curious, everytime you update the DB, will you provide an updated DL link?
Click to expand...

I don't think it will happen 100% of the time. Maybe 65-75% of the time.
 
User Name: thenemesis
Stability: 3DMark 06

CPU name E6600
OC: 3780Stepping: 6 B2
Week: L627
Code: A685
Vcore: 1.58v

Cooling: Water
Cooler brand/model:Corsair Nautilus 500
Motherboard: Abit AW9D-Max
Bios Version: 1.2

RAM brand: G. SKill
RAM rated speed: 6400
RAM actual speed: 840
Latency: 4-4-4-12
420%20FSB%20Benchmark%20Abit.jpg
 
@the nemesis ,I see competition :D

You need hour hours prime dude but looking at your settings I think you will do it.

use orthos 2004 and watch your cpu throttle , only kidding

If this counts then I have 4060mhz like with super pi , can i use that?
 

3915mhz , running 2 instances of 32 meg pi now.

Update- Can only get 1 32mg pi done and not 2
 
User Name: mattsaccount
Stability: 11 hours 2xPrime95

CPU name: E6600
OC: 3060mhz
Stepping: 6 B2
Week: L628
Code: A266
Vcore: 1.325 according to BIOS.

Cooling: Air
Cooler brand/model: Arctic Cooling Freezer 7 Pro

Motherboard: ASUS P5B
Bios Version: 509

RAM brand: Crucial
RAM rated speed: 6400, 4-4-4-12
RAM actual speed: 5300 (340mhz)
Latency: 4-4-4-12

Screenshot: http://www.cs.wisc.edu/~mjr/screenshots/overclock.png

Please let me know if I'm missing anything.

Overall, I'm happy with this OC. I didn't want to increase the voltage too much, and this memory isn't a very good fit for this mobo since it requires 2.2V but the mobo can only deliver 2.1V (oops). There may be room for some tuning here--I haven't experimented with the RAM timings at all. All other voltages are at their default levels.
 
nooh said:
@the nemesis ,I see competition :D

You need hour hours prime dude but looking at your settings I think you will do it.

use orthos 2004 and watch your cpu throttle , only kidding

If this counts then I have 4060mhz like with super pi , can i use that?
Click to expand...
Actually, I posted this for the "highest oc not proven to be stable" section of the dbase. Entry will be colored black instead of green.
 
thenemesis said:
Actually, I posted this for the "highest oc not proven to be stable" section of the dbase. Entry will be colored black instead of green.
Click to expand...

Well then you will have to push it over 4,007MHz in order to make it into the top 5 for the E6600.
 
That's a nice overclock thenemesis! :)
I just received the Abit AW9D-Max and I really like it. I have a E6600 using the 1.2 bios on the Abit.. GSkill 6400...
I'm having a problem with my Pi times. Pi times scale correctly until right around the 400x6 and then after that the times seem to go higher.
@ 3.6GHz I'm 14s and @ 3.75GHz I'm @ 17s! :confused:
 
User Name: Dethred
Stability: 7hours 26minute+

191663961.jpg


CPU name: E6400
OC: 3200mhz
Stepping: 6 B2 (?)
Week: L6A27
Code: A225
Vcore: 1.344

Cooling: Air
Cooler brand/model: Arctic Cooling Freezer 7 Pro

Motherboard: Gigabyte GA-965P-DS3
Bios Version: F6

RAM brand: Patriot
RAM rated speed: 5300
RAM actual speed: 800
Latency: 5-5-5-15

SuperPi 1MB took 18seconds
 
I am now in my apartment. Comcast is supposed to be the same speed that I had before at
my parents house, but it is actually much faster. I will be putting things away tonight and
tomorrow but you should get an update Monday while I am at work.
 
gjwild said:
That's a nice overclock thenemesis! :)
I just received the Abit AW9D-Max and I really like it. I have a E6600 using the 1.2 bios on the Abit.. GSkill 6400...
I'm having a problem with my Pi times. Pi times scale correctly until right around the 400x6 and then after that the times seem to go higher.
@ 3.6GHz I'm 14s and @ 3.75GHz I'm @ 17s! :confused:
Click to expand...
Same thing happened to me due to the mounting wrong of my HSF , after remounted it and sandpapered the obstruction , after that I got 12sec on 1meg pi at 3915mhz
 
nooh said:
Same thing happened to me due to the mounting wrong of my HSF , after remounted it and sandpapered the obstruction , after that I got 12sec on 1meg pi at 3915mhz
Click to expand...
I think I'll give that a shot, thanks
I've got to try something, ;)
 
This will probably be my final entry for this rig:


Username: Donnyjepp
Stability: 4.3 hours, Orthos

CPU name E6600
OC: 3420
Stepping: 6 B2
Week: L627
Code: A795
Vcore: 1.376

Cooling: Air
Cooler brand/model: Zalman 9500

Motherboard: Gigabyte 965p-ds3
Bios Version: F5

RAM brand: Corsair
RAM rated speed: 6400
RAM actual speed: 950
Latency: 5-5-5-15
 
What kind of temps you getting there Donny? Case and airflow if you could...

I had exact same setup minus ram and would hit about 53 load.
 
gjwild said:
I think I'll give that a shot, thanks
I've got to try something, ;)
Click to expand...
The temps went down too.

At the mo I am running it at 3.55ghz and my temps are at 49c (core temp) on idle and 56c (coretemp) load. Its running 24/7 at that speed.
 
Jodiuh said:
What kind of temps you getting there Donny? Case and airflow if you could...

I had exact same setup minus ram and would hit about 53 load.
Click to expand...

It hits about 63C on each core under load. Toasty, but I have all the thermal crap turned off in the BIOS. Idle is around 55-56. I run Boinc + WorldCommunityGrid (think folding@home) round the clock so I don't want the board slowing things down when it thinks it's idle.

Case is a Lian-Li PC-60APLUS2 with 2x120 and 2x80 fans,
http://www.newegg.com/Product/Product.asp?Item=N82E16811112115
 
OK, first post here so, "Hi" to everyone.

Tallman
4+ hours Orthos

retail box 6700
OC: 3613 Mhz
step: 6 B2
week: 23
code: A549
vcore: 1.575 in bios

cooling: Air
Scythe Mine 3

P5w-DH Dlx (AC5 under nb and sb chip coolers and small fan on nb cooler)
bios 1402

Ram: OCZ
rated: DDR2 1000 4-5-4-15
actual: 722
latency: 5-5-5-15

my.php
 
User name: gunderwood
Stability: Prime95 (9Hrs, 3mins: manually stopped) also folding at home has run fine for several days.

CPU: E6600
OC: 3379MHz
Stepping: 6 B2
Week: L628
Code: A270
CPU Watts: 65
VCore: 1.432

Coooling: Air
Cooler: Intel Stock

MB: Asus P5W64-WS Pro
Bios: 0116

RAM: OCZ
RAM rated Speed: 6400
RAM actual speed: DDR2-748
Latency: 5-6-6-18

Zalman 9500 has just been added...
 
donnyjepp said:
It hits about 63C on each core under load. Toasty, but I have all the thermal crap turned off in the BIOS. Idle is around 55-56.
Click to expand...
Thanks. Idle seems a touch high? If your ambient's not 28+, you may wanna check the heat spreader. A nice lappage on the chip and hsf surface gave me about 3C idle and 6C load.

nooh said:
wow amazing background ....whoops i mean amazing clocks
Click to expand...
Nope, you had it right. :D
 
Jodiuh@ I agree with you , i have to check at least two times aday and just imagine what the rest is like. :D
 
Here is some marketing stuff I pulled from the summary stats.

Asus controls 48% of the motherboard market within our sample.
Gigabyte controls 43% of the motherboard market within our sample.

Corsair controls 30.07% of the memory market within our sample.
G.Skill controls 22.8% of the memory market within our sample.
OCZ controls 16.5% of the memory market within our sample.

Scythe controls 21.6% of the cooler market within our sample.
Zalman controls 12.8% of the cooler market within our sample.
Thermaltake controls 12% of the cooler market within our sample.
 
got an e 6600 on an asrock 775 dual vista @ 2.75ghz on stock volts 1.35v batch L630a so week 30 running on ddr400 lol bios 1.9 code a753 all on stock cooler
 
Tallman said:
:)


NSFW ? (I scratch my head)
Click to expand...

not safe for work

it's borderline.. you covered most of the goods up pretty well.. at a glance it looks mostly harmless. heh.
 
Status
Not open for further replies.
Back
Top