Recent content by Max-Powers

I have a Lepai LP-2020A hooked up to 2 Energy C-100 speakers. This then connects to my devices via headphone jack. I have used this setup for quite some time. I recently unplugged it from my surface pro while it was still on, and it made a pop sound. Oh well, I have done this before, no...

I stashed mine away never to use again. I have a note 3 and use that stylus on my surface. Works great and has its own spot in my note. However, the calibration sucks!!!! The stylus that comes with the surface is totally terrible. It only works if I write at a 90degree angle. I feel the...

I had an old RAID bay with 5x 1.5 TB HDD in RAID 5. Something messed up, and I was unable to recover the information. I think my computer lost the RAID controller. This was years ago, I do not want the information anymore. Anyway, I am now trying to sell the individual hard drives. However...

So If I forget about the pen input, and concentrate on the basics like wi-fi, Bluetooth, speakers and such, then what would be my best bet? I am looking for something about 7 inches that has enough 3rd party hardware to give me options of docks and cases with Bluetooth keyboards. I would love...

There is no tablet forum.? I am looking for a tablet with the following things pen and multi touch input blue tooth speakers decent viewing angle The iPad is just so expensive and has more horse power than what I need. I will use it for internet, lounging, typing (with blue tooth keyboard)...

Bump: Still looking for any replacement for my gyration remote. It was perfect for HTPC so I do not see why they discontinued it. I use it to turn on/off each part of my system, totally control my stereo and my PC. The regular Air Mouse just does not cut it. Anyone have any ideas?

crystakdiskinfo says DiskC good Disk 1 good, D Caution, F caution, E Bad, Disk 5 Caution Drive E is the one that is 5.5 TB. the thing that is bad is attribute name Reallocated Sectors Count. What does this mean All my pictures and lots of files were on here. What are my options.

ok. Well ZAR sees 5 disks of 1.3TB. So i am guessing it is seeing all the drives. But it freezes and during RAID analysis. What do i do?

I was able to get bios to see all my hard drives when plugged directly into the mobo. I do not know the order of the SATA ports tho. computer managment sees 3 drives that are healthy and RAW, and 2 drives that are unallocated. One of the "healthy" drives is 5.5TB, the rest of the drives are...

I tried that. But my computer wasnt recognizing all my SATA ports or something. I have a GA-MA790X-UD4P

I usually always figure out my computer problems using the internet. I am lost on this one. This is over my head. I do not want to admit defeat. What do I do then? Just trash all my data? I am running windows 7 32bit. The raid tower is a RSV-S5. It runs a silicon image raid controller...

So i got a new raid tower. Same model. I plug it in same problem. I change out the backplate. Same thing. Change the slot on the mobo, same thing. Mess around with it a bit and now it is staying online. But it is not recognizing my RAID. At first computer management saw it as a 5.5 TB and...

What are "RAID parameters"? I will look into downloading ZAR but if it is required to run and look at the RAID array it will have problems because of the 1 min frozen 1 min free that my computer goes through when this thing is turned on. And yes I had problems with it 11 months ago like I...

I have had a Sans Digital TowerRAID 5bay for over a year now. Something similar to this. Don't know if it is the exact model I have 5 1.5 TB samsung drives in raid 5 It has worked well, only encountering a couple instances where my computer would stop seeing it and would require a shut down and...