I have a wireless n as well and it skips like crazy if I try to stream. I agree with above poster to go with wire.
100 if a tight limit if you need to buy the entire box (case, drives, cpu, mobo, vid card, etc etc)
On the issue of sound i have a case with an intake and exhaust fan 120mm...
Ive read so many ways to do it, but i did the rice grain way. I put a small rice grain size of AS5 on the center. But you are saying my heat sink is not good enough?
I am trying to overclock my x6. Currently its at vcore=1.325, 18x multiplier, cpu freq=195 running at 3.5 ghz. Not sure what other information you all might need.
Cooler is ARCTIC COOLING Freezer 64 Pro.
http://www.newegg.com/Product/Product.aspx?Item=N82E16835185125
Idle is 33C. When I...
check the dust in the vid card. check DEEEP in there even if the fan blades look clean. Something similar happened to me, i blew the fan blades clean. Then realized there was a TON of duct deep inside. Solved my issues.
This is 2 pass im assuming? I'm new to all this sorry. I heard that the CQ mode is much quicker though. I am not extremely picky with how big the size is, just in the neighborhood.
I have a ripped version of 300 with anydvdhd. Size is 23.2 gb.
I used CQ22 and got it down to a 7.14 gb mkv file. Roughly a 66+% reduction. Since you do CQ 18 (or anyone for that matter), do you know 'roughly' how much of a reduction from the original it is?
My goal is to have an mkv output...
I looked at this graph...
converting bluray to mkv, which is what I'm mostly interested in, and times are fairly 'close'.
Assuming a 2 hour movie instead of 2.5 mins, and looking at both the overclocked 2500k and 2600k, seems that it would take roughly 163 mins and 133 mins respectively (if...
Yes I plan on oc'ing it. More than likely the 2600k. I'm just on a budget so I didn't want to go crazy and wasn't sure if more ram was better or speed (assuming a comparable price point)
Also, does cl7 vs cl9 make a noticeable difference given the same amount of ram at the same speed?
Last...
I was debating on the 2 situations:
2x2 gb ddr3 cl7 of 1600 ram
vs
2x4 gb ddr3 cl9 of 1333 ram
Which would be best for the SB and why? If it matters, I plan on doing a lot of video encoding.
After reading more reviews on the new SB processor I'm starting to think that I want to go ahead and go with a 2600k and overclock it. I'm just not sure if I want to spend the money and go with 2600k or go cheaper with the 2500k.
i actually have been looking at the 2600k i7, trying to price it with mobo/ram/cooler, its coming out to roughly 600ish. Do you think the rip times will be cut drastically? Would hoping for a 2pass in the neighborhood of 4-5 hours be pushing it :P